Seakeeper Ride 1125 - Full Kit w/o Keypad

Ride 1125 - Full Kit without Keypad

Seakeeper Ride controllers are mounted to your boat’s transom, below the waterline. Using custom, proprietary inertial sensing hardware and software, the system understands how the boat is behaving in all three axes and commands the deployment of the rotary blades to counteract pitch, roll, and yaw. As the blades are deployed, they create lift at the transom, managing the vessel’s motion instantaneously.

Designed with aluminum components for added strength, Seakeeper Ride 1125 is designed for boats between 43-55 ft. in length. Seakeeper Ride took their high-performing underway stabilization systems and made them bigger. Now with more span to create more lift, Seakeeper Ride can stabilize boats up to 55 ft. From center consoles, sportfish yachts, cruisers, and more.

Before purchasing, please verify this system will fit the intended boat.

Rapid Actuation

Rotary blades deploy at a rate of up to 300 mm per second, making 100 adjustments every second, enabled by a power-dense rotary design that requires just 7-10 amps for operation.

Full Underway Control

Controls all motions (pitch, roll, and yaw) thanks to deployment speed and proprietary control software and hardware.

Intuitive

Predicts motion and responds instantaneously to eliminate them before they’re felt, with no buttons to push or adjustments to make, providing a boating experience you never imagined.

Reliable

The drivetrain is completely sealed in a dry and greased environment with no mechanical exposure to saltwater.

(2) Port and (2) Starboard Controllers (4 Total)

Seakeeper Ride controllers are installed on the transom on either side of the engine(s).

Software Module

The "brain" of the system includes Seakeeper’s propri