Whale IC Retail Kit 12V Gulper IC Pump & Strainer IC 
Attwood Turbo 3000 Series Water-Resitant, In-Line Blower - 12V - White 
Rule In-Line Blower – 4″ Ducting
Part Number: 240
Designed for efficient, high output operation, these blowers feature our exclusive front and rear shaft seals and corrosion resistant motor housings for long life. Compact and easily installed on any flat surface, Rule® in-line blowers provide higher air flow, lower amp draw, and quieter operation than standard blowers. For International & US Markets.
Features
- Efficient high-volume air flow
- Quiet operation
- Low amp draw
- Slip-on inlet and outlet ducting connections
- Sealed motor shaft for moisture protection
- Corrosion resistant nickel-plated motor housing
- IMCI (CE)
- USCG 183.410 Compliant: Ignition protected
Applications:
Race cars and helmet ventilation
Bus ventilation (engine and bathroom fumes)
Prison van ventilation (cooling, air-freshening)
Blow-up signs and mascots
Tanning booths
Building ventilation
Specifications
- Approvals: CE
- Dimensions (H x W x D): 102 x 152 x 106 (mm)
- ElectricalCharacteristics: 4.3 Amp
- Flow Rate (US gallons & litres): 235 CFM @ Open Flow
- Fuse Size: 7 (amp)
- Product Inlet Fitting: 4″ (102 mm) Ducting
- Product Outlet Fitting: 4″ (102 mm) Ducting
- Voltage: 13.6 (Vdc)
WARNING: This product can expose you to chemicals including STYRENE which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
| Weight | 1 g |
|---|---|
| Dimensions | 6 × 5 × 5 cm |
Brand
Rule
Accessories
Literature
Owners Manual: Download PDF
No videos available for this product.
Related products
Marine Plumbing & Ventilation > Blowers & Heaters
4″ In-Line Blower Inlet/Outlet – 4″CFM – 240 Johnson Pump in-line blowers provide ventilation for bilges, engine compartments, galleys, and heads.Made from high quality ABS plastic construction, corrosion resistant motors, and premium electrical connections completes these blowersFive blade, quiet, highly efficient, and reliable operation will provide years of long lifeCompact and with mounting feet makes [...]
Marine Plumbing & Ventilation > Blowers & Heaters
Premium Defroster Kit 12kW – 12V Marine defroster/ heater with 12kW heater coil and double 12V radial blowers. Wiring harness, 4-step control panel and hose adapters included. Specifications: Weight: 6 kg/13 lbs Dimensions: 403/15.87L x 172/6.8H x 269/10.6W mm/in Type: KIT-XL compartment defroster/heater Certification: CE approved according to marine standards
Marine Plumbing & Ventilation > Blowers & Heaters
Flexmount Blower High volume air intake or extraction blowers for engine room, fuel compartment, galley or heads Features: Flexmounting for 360° adjustable outlet Slip-on inlet and outlet ducting connection Low current draw Dimensionally stable quiet running Delrin rotors Corrosion resistant materials throughout Complies with USCG 183.410 and ISO 8846 MARINE (Ignition Protection) ISO 9097 MARINE [...]
Marine Plumbing & Ventilation > Blowers & Heaters
Rule In-Line Blower – 3″ DuctingPart Number: 140 Designed for efficient, high output operation, these blowers feature our exclusive front and rear shaft seals and corrosion resistant motor housings for long life. Compact and easily installed on any flat surface, Rule? in-line blowers provide higher air flow, lower amp draw, and quieter operation than standard [...]
Marine Plumbing & Ventilation > Blowers & Heaters
DC 105 CFM Flangemount 3″ Blowers Jabsco blowers are primarily intended for intermittent duty cycles such as evacuating fuel vapors from bilge areas. If desired, they also may be used for other general air circulation applications with longer duty cycles. However, when doing so, it should be noted that the maximum motor life is approximately [...]
Marine Plumbing & Ventilation > Blowers & Heaters
Camco Temperature & Pressure Relief Valve – 1/2″ Valve w/4″ Probe
Temperature & Pressure Relief Valve – 1/2″ Valve with 4″ Probe Protect your RV water heater from excessive temperatures and water pressure with corrosion-resistant metal T&P valves. All valves are factory set at 150 PSI and are crafted with no gaskets and epoxy-coated probes to prevent corrosion buildup. WARNING: This product can expose you to [...]
Marine Plumbing & Ventilation > Blowers & Heaters
DC 250 CFM Flexmount Continuous Duty 4″ Blowers Features: Extended Life 5,000 Hour Motor Tough Reinforced Thermoset Plastic Housing Mounts To Any Flat Surface Slip-On Inlet Ducting Connection Efficient High Volume Air Flow Low-Current Draw Corrosion-Resistant Materials Throughout N.M.M.A. Type Accepted Meets USCG Electrical Regulations of Title 33 Chapter I, Part 183 Subpart I and [...]
Marine Plumbing & Ventilation > Blowers & Heaters
Shurflo by Pentair YELLOWTAIL™ 3″ Marine Blower – 12 VDC, 120 CFM
YELLOWTAIL™ 3″ Marine Blower – 12 VDC, 120 CFM SHURFLO has developed a unique nylon fan that includes six blades to ensure high performance and efficient ventilation for bilges, engine compartments, galleys and heads. Installation of the YELLOWTAIL blower is made easy with extended barbs and slotted mounting bracket. Features: 6 Blade Nylon Fan Heavy [...]