-
×
Mastervolt Battery Mate 1603 IG Isolator - 120A, 3 Bank
1 × $492.60 -
×
Sea-Dog Smart Dual Battery Isolator
1 × $85.95 -
×
Ronstan Series 30 Block - Single - Loop Top
1 × $13.21 -
×
Lumitec High Intensity "Anywhere" Light - Brushed Housing - Blue Non-Dimming
1 × $49.99 -
×
Attwood Portable Fuel Tank - 6 Gallon w/Gauge
1 × $88.99
Weld Mount Single Poly Clamp f/1/4″ x 20 Studs – 1″ OD – Requires 1.75″ Stud – Qty. 25
$52.27
Out of stock
Single Clamp
Each clamp is designed to be mounted using 1/4″ x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous service.
Features:
- Hose OD: 1.0″
- Stud Required: ST125-1420-28SS
- Clamp Dimensions L/W/D: 1.65″ x 0.79″ x 1.18″
- Recommended Clamp Spacing: 5′
| Weight | 0.5 g |
|---|---|
| Dimensions | 11 × 8 × 2 cm |
Brand
Weld Mount
No accessories available for this product.
No literature available for this product.
No videos available for this product.
Related products
Out of stock
Boat Outfitting > Tools
Weld Mount 1.5″ Tall Stainless Steel Stud w/#10 x 24 Threads – Qty. 10
$34.99
1.5″ Tall Stainless Stud w/#10 x 24 Thread Utilize the same base as the 1.4″ x 20 studs but with a smaller threaded stud inserted into the base. These studs are ideal for mounting wire clamps and securing items which require a smaller stud diameter. These studs can be bonded from either surface of the [...]
Out of stock
Boat Outfitting > Tools
Weld Mount AT-3B Small Black Nylon Wire Tie Mount – Qty. 100
$52.51
Black Nylon Wire Tie Mount The AT-3 tie mount is smaller for panel and other small space applications. This part is molded in black nylon and is sized for a #3 wire tie with a maximum width of .20″. Average pull strength is about 50 lbs. The square base measures .44″ wide. Use this smaller [...]
Boat Outfitting > Tools
$39.99
White Nylon Wire Tie Mount The AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It’s designed for a #5 wire tie and has an average pull strength of 150 lbs. It’s approved for submerged bilge applications. Stop putting plywood in your [...]
Out of stock
Boat Outfitting > Tools
Weld Mount 2″ Tall Stainless Stud w/1/4″ x 20 Threads – Qty. 10
$52.99
2″ Tall Stainless Stud w/1/4″ x 20 Thread Mounts to virtually any surface using the AT-4010 Acrylic Adhesive. This is a structural part with 500 lbs. of tensile strength and 650 lbs. in shear. All studs have 1/4″ x 20 threads. Use for hanging panels, through deck mounts and many other uses.
Out of stock
Boat Outfitting > Tools
$78.99
Aluminum Base Wire Tie Mount This tie mount is provided with an anodized aluminum base with a nylon tie mount which is riveted to the base. The nylon mount swivels 360 degrees making alignment with the wire harness easier. This tie mount is designed for a #5 wire tie and has an average pull strength [...]
Out of stock
Boat Outfitting > Tools
Weld Mount Manual Dual Pusher Rod f/AT-2010 & AT-4020 – Qty. 10
$23.64
Dual Pusher Rod The AT-500 dual pusher rod is used to dispense equal amounts of our AT-2010 or AT-4020 adhesive for manual mixing. This dual pusher rod can not be used with our AT-300 or AT-350 mixing tips as it does not generate enough force to push the adhesives through the tip.
Out of stock
Boat Outfitting > Tools
$299.99
Aluminum Base Wire Tie Mount This tie mount is provided with an anodized aluminum base with a nylon tie mount which is riveted to the base. The nylon mount swivels 360 degrees making alignment with the wire harness easier. This tie mount is designed for a #5 wire tie and has an average pull strength [...]
Out of stock
Boat Outfitting > Tools
Weld Mount 1″ Tall Stainless Stud w/1/4″ x 20 Threads – Qty. 10
$32.99
1″ Tall Stainless Stud w/1/4″ x 20 Thread Mounts to virtually any surface using the AT-4010 Acrylic Adhesive. This is a structural part with 500 lbs. of tensile strength and 650 lbs. in shear. All studs have 1/4″ x 20 threads. Use for hanging panels, through deck mounts and many other uses.