Weld Mount Single Poly Clamp f/1/4″ x 20 Studs – 1/4″ OD – Requires 0.75″ Stud – Qty. 25
$22.22
Out of stock
Single Clamp
Each clamp is designed to be mounted using 1/4″ x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous service.
Features:
- Hose OD: 0.250″
- Stud Required: ST125-1420-12SS
- Clamp Dimensions L/W/D: 0.87″ x 0.47″ x 0.41″
- Recommended Clamp Spacing: 3′
| Weight | 0.1 g |
|---|---|
| Dimensions | 7 × 6 × 1 cm |
Brand
Weld Mount
No accessories available for this product.
No literature available for this product.
No videos available for this product.
Related products
Boat Outfitting > Tools
Weld Mount 1″ Tall Stainless Stud w/1/4″ x 20 Threads – Qty. 10
1″ Tall Stainless Stud w/1/4″ x 20 Thread Mounts to virtually any surface using the AT-4010 Acrylic Adhesive. This is a structural part with 500 lbs. of tensile strength and 650 lbs. in shear. All studs have 1/4″ x 20 threads. Use for hanging panels, through deck mounts and many other uses.
Boat Outfitting > Tools
Black Nylon Wire Tie Mount The AT-3 tie mount is smaller for panel and other small space applications. This part is molded in black nylon and is sized for a #3 wire tie with a maximum width of .20″. Average pull strength is about 50 lbs. The square base measures .44″ wide. Use this smaller [...]
Boat Outfitting > Tools
Weld Mount 2″ Tall Stainless Stud w/1/4″ x 20 Threads – Qty. 10
2″ Tall Stainless Stud w/1/4″ x 20 Thread Mounts to virtually any surface using the AT-4010 Acrylic Adhesive. This is a structural part with 500 lbs. of tensile strength and 650 lbs. in shear. All studs have 1/4″ x 20 threads. Use for hanging panels, through deck mounts and many other uses.
Boat Outfitting > Tools
Weld Mount AT-5B Large Black Nylon Wire Tie Mount – Qty. 100
Black Nylon Wire Tie Mount The AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It’s designed for a #5 wire tie and has an average pull strength of 150 lbs. It’s approved for submerged bilge applications. Stop putting plywood in your [...]
Boat Outfitting > Tools
Deluxe Rigging Knife Made entirely of top quality stainless steel with dura-edged blades. Telo Rigging knives are tools that yachtsmen will be proud to own, yet are affordable. Deluxe Rigging Kinfe comes with a marlin spike, shackle key, and screwdriver.
Boat Outfitting > Tools
Weld Mount AT-3B Small Black Nylon Wire Tie Mount – Qty. 100
Black Nylon Wire Tie Mount The AT-3 tie mount is smaller for panel and other small space applications. This part is molded in black nylon and is sized for a #3 wire tie with a maximum width of .20″. Average pull strength is about 50 lbs. The square base measures .44″ wide. Use this smaller [...]
Boat Outfitting > Tools
Weld Mount 2″ Tall Stainless Stud w/3/8″ x 16 Threads – Qty. 5
2″ Tall Stainless Stud w/3/8″ x 16 Thread The HS200 stud is designed for heavy load applications such as mounting filters and panels. Thestud is inertial (friction) welded to a 2″ base plate creating a very strong part. Manufactured of 304 stainless steel. Tensile strength is approximately 1,200 lbs. and shear strength is 1,500 lbs.
Boat Outfitting > Tools
White Nylon Wire Tie Mount The AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It’s designed for a #5 wire tie and has an average pull strength of 150 lbs. It’s approved for submerged bilge applications. Stop putting plywood in your [...]