Industrial Kit with AT-8040 Adhesive
This Kit Contains A Large Selection Of All The Common Weld Mount Parts And Is An Ideal Kit For Industrial Maintenance Shops. A Wide Selection Of Weld Mount Parts Are Supplied In A Heavy “Durham” Metal Box Which Is A Standard Rack Mounted System. The Kit Contains 1 Tubes Of Our AT-8040 No Slide Multi Bonder Acrylic Adhesive Which Will Bond To Almost All Surfaces Except Low Energy Plastics And Rubber. AT-8040 Will Hold Even Our Heaviest Parts On An Overhead Or Vertical Surface Without Fixturing. The Adhesive Sets in 12 Minutes And Is Heat Resistant To 225 Degrees. The Adhesive Should Be Refrigerated and Has A Shelf Life Of 1 year.
The Weld Mount System Eliminates The Need To Drill And Tap, or Weld When Used On Metal Surfaces. Great for Mounting Wire and Conduit Runs, Electrical Boxes And Other Structural Applications.
The AT-7001 Kit Contains:
- (1) AT-8040 – No Slide Multi Bonder Adhesive With 12 Minute Kick
- (10) AT-850 – 3.5″ Mixing Tips For AT-8040 Adhesive
- (1) AT-300 – Adhesive Dispensing Gun
- (30) AT-3B – Small Black Cable Tie Mount
- (100) AT-5B – Large Black Cable Tie Mount
- <(25) AT-5 - Large White Cable Tie Mount
- (25) AT-7 – Aluminum Base Swivel Wire Tie Mount
- (25) AT-9 – Aluminum Wire Tie Mount
- (2) AT-113 – Large Footman’s Strap White
- (2) AT-113B – Large Footman’s Strap Black
- (6) ST125-1420-12SS – 0.75″ Long Stud With 1/4 x 20 Threads 1.25″ Base
- (6) ST125-1420-16SS – 1.00″ Long Stud With 1/4 x 20 Threads 1.25″ Base
- (6) ST125-1024-12SS – 0.75″ Long Stud With #10 x 24 Threads 1.25″ Base
- (6) ST125-1024-20SS – 1.25″ Long Stud With #10 x 24 Threads 1.25″ Base
- (2) SHC-1000 – Single Hose Clamp 1.00″
- (2) DHC-1000 – Double Hose Clamp 1.00″
- (1) Storage Box – Durham Manufacturing 18.5′ x 12.5″ x 3.25″
- Step By Step Instructions
| Weight | 9.7 g |
|---|---|
| Dimensions | 20 × 13 × 3 cm |
Brand
Weld Mount
Accessories
Videos
Video 1: Link
Related products
Boat Outfitting > Tools
Weld Mount AT-5B Large Black Nylon Wire Tie Mount – Qty. 100
Black Nylon Wire Tie Mount The AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It’s designed for a #5 wire tie and has an average pull strength of 150 lbs. It’s approved for submerged bilge applications. Stop putting plywood in your [...]
Boat Outfitting > Tools
Weld Mount 1.5″ Tall Stainless Steel Stud w/#10 x 24 Threads – Qty. 10
1.5″ Tall Stainless Stud w/#10 x 24 Thread Utilize the same base as the 1.4″ x 20 studs but with a smaller threaded stud inserted into the base. These studs are ideal for mounting wire clamps and securing items which require a smaller stud diameter. These studs can be bonded from either surface of the [...]
Boat Outfitting > Tools
Footman’s Strap Mount The Footman’s Strap Mount is designed to be bonded with AT-4020 Acrylic Adhesive. This strap mount is 3.25″ long and 1″ wide and holds up to a 1.3″ max strap width. This strap is incredibly strong, paintable, and is rated for over 600 lbs. strength. Use it for battery and tank tie [...]
Boat Outfitting > Tools
Weld Mount 2.5″ Tall Stainless Stud w/1/4″ x 20 Threads – Qty.10
2.5″ Tall Stainless Stud w/1/4″ x 20 Thread Mounts to virtually any surface using the AT-4010 Acrylic Adhesive. This is a structural part with 500 lbs. of tensile strength and 650 lbs. in shear. All studs have 1/4″ x 20 threads. Use for hanging panels, through deck mounts and many other uses.
Boat Outfitting > Tools
Weld Mount 1.5″ Tall Stainless Panel Stud w/0.62″ Base & #8 x 32 Threads – Qty. 15
1.5″ Tall Stainless Stud w/#8 x 32 Thread Our Small Stainless Steel Panel Studs have a wide range of uses. Originally they were used for mounting on the backside of dash panels for mounting to the console. Now they are used for securing a wide range of wire clamps and other small components to composite [...]
Boat Outfitting > Tools
Weld Mount .75″ Tall Stainless Standoff Through Thread w/5/16″ x 8 Threads – Qty. 6
.75″ Tall Stainless Standoff w/5/16″ x 8 Threads – Through-Thread Unlike the SOB standoffs which have a blind thread, the SOT series standoffs have a thread which runs all the way through the barrel of the standoff. This allows the standoff to be mounted from either side of the base. These parts are manufactured in [...]
Boat Outfitting > Tools
White Nylon Wire Tie Mount The AT-3 tie mount is smaller for panel and other small space applications. This part is molded in white nylon and is sized for a #3 wire tie with a maximum width of .20″. Average pull strength is about 50 lbs. The square base measures .44″ wide. Use this smaller [...]
Boat Outfitting > Tools
Weld Mount 2″ Tall Stainless Stud w/3/8″ x 16 Threads – Qty. 5
2″ Tall Stainless Stud w/3/8″ x 16 Thread The HS200 stud is designed for heavy load applications such as mounting filters and panels. Thestud is inertial (friction) welded to a 2″ base plate creating a very strong part. Manufactured of 304 stainless steel. Tensile strength is approximately 1,200 lbs. and shear strength is 1,500 lbs.