Lumitec MiniRail2 6" Light - White Non Dimming 
Plano Double-Sided Adjustable Tackle Organizer Large - Silver/Blue 
Camco FasTen Leveling Blocks XL w/T-Handle - 2x2 - Grey *10-Pack 
Weld Mount AT-3 Small White Nylon Wire Tie Mount - Qty. 100 
10:1 Gun Plunger for AT-6030 Adhesive
Single Pack gun plunger for AT-6030 Adhesive (sold separately)
| Weight | 0.5 g |
|---|---|
| Dimensions | 9 × 4 × 1 cm |
Brand
Weld Mount
Accessories
No literature available for this product.
No videos available for this product.
Related products
Boat Outfitting > Tools
Weld Mount 1.25″ Tall Stainless Panel Stud w/0.62″ Base & #8 x 32 Thread – Qty. 15
1.25″ Tall Stainless Stud w/#8 x 32 Thread Our Small Stainless Steel Panel Studs have a wide range of uses. Originally they were used for mounting on the backside of dash panels for mounting to the console. Now they are used for securing a wide range of wire clamps and other small components to composite [...]
Boat Outfitting > Tools
Weld Mount AT-3B Small Black Nylon Wire Tie Mount – Qty. 100
Black Nylon Wire Tie Mount The AT-3 tie mount is smaller for panel and other small space applications. This part is molded in black nylon and is sized for a #3 wire tie with a maximum width of .20″. Average pull strength is about 50 lbs. The square base measures .44″ wide. Use this smaller [...]
Boat Outfitting > Tools
Weld Mount Single Poly Clamp f/1/4″ x 20 Studs – 1/2″ OD – Requires 1.5″ Stud – Qty. 25
Single Clamp Each clamp is designed to be mounted using 1/4″ x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous service. Features: Hose OD: 0.5″ Stud Required: ST125-1420-24SS Clamp Dimensions L/W/D: 1.39″ x 0.79″ x 0.89″ Recommended Clamp Spacing: 4′
Boat Outfitting > Tools
White Nylon Wire Tie Mount The AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It’s designed for a #5 wire tie and has an average pull strength of 150 lbs. It’s approved for submerged bilge applications. Stop putting plywood in your [...]
Boat Outfitting > Tools
Weld Mount 2″ Tall Stainless Stud w/1/4″ x 20 Threads – Qty. 10
2″ Tall Stainless Stud w/1/4″ x 20 Thread Mounts to virtually any surface using the AT-4010 Acrylic Adhesive. This is a structural part with 500 lbs. of tensile strength and 650 lbs. in shear. All studs have 1/4″ x 20 threads. Use for hanging panels, through deck mounts and many other uses.
Boat Outfitting > Tools
Weld Mount 1″ Tall Stainless Panel Stud w/0.62″ Base & #8 x 32 Thread – Qty. 15
1″ Tall Stainless Stud w/#8 x 32 Thread Our Small Stainless Steel Panel Studs have a wide range of uses. Originally they were used for mounting on the backside of dash panels for mounting to the console. Now they are used for securing a wide range of wire clamps and other small components to composite [...]
Boat Outfitting > Tools
Footman’s Strap Mount The Footman’s Strap Mount is designed to be bonded with AT-4020 Acrylic Adhesive. This strap mount is 3.25″ long and 1″ wide and holds up to a 1.3″ max strap width. This strap is incredibly strong, paintable, and is rated for over 600 lbs. strength. Use it for battery and tank tie [...]
Boat Outfitting > Tools
Weld Mount Stainless Nut Plate w/1/4″ x 20 Threads – Qty. 10
Floating Nut Plates Our floating nut plate is designed for through-hole mounting applications. The rubber fixture holds the part in the through hole while it is bonded in place with our acrylic adhesive. The fixture keeps the threads clean during bonding. Remove the rubber fixture when you are ready to make up the assembly. The [...]