Skylla – 24/100 TG Charger – 230V
One full rated output and one (1) 4 Amp output. Charge voltage can be precisely adjusted to suit any battery system.
The input for the charger is 230V at 50/60HZ. Charge voltage can be measured directly on the battery terminals in order to compensate for voltage loss due to cable resistance.
An external sensor allows to measure battery temperature and compensate charge voltage accordingly.
Features:
- Perfect chargers for any type of battery – Charge voltage can be precisely adjusted to suit any sealed or unsealed battery system. In particular, sealed maintenance-free batteries must be charged correctly in order to ensure long service life. Overvoltage will result in excessive gassing and venting of a sealed battery. The battery will dry out and fail.
- Suitable for AC and DC supply (AC-DC and DC-DC operation)
- Every TG Charger has a microprocessor, which accurately controls the charging in three steps
- Use of TG Chargers as power supply – As a result of the perfectly stabilized output voltage, a TG Charger can be used as a power supply if batteries or large buffer capacitors are not available.
- Manufactured with a battery temperature sensor. When connected, charge voltage will automatically decrease with increasing battery temperature.
- In order to compensate for voltage loss due to cable resistance, TG Chargers are provided with a voltage sensor so that the battery always receives the correct charge voltage
Technical Specifications:
- Input Voltage – 230V AC
- Input Voltage Range – 185 to 264V AC
- Input Voltage Range – 180 to 400V DC
- Battery Capacity – 500 to 1000 Ah
- Frequency – 45 to 65 Hz
- Battery Connection – M8 studs
- 230V AC Connection – Screw clamp (AWG 6)
- Dimensions (H x W x D) – 14.4″ x 9.9″ 10.1″ (36.5 x 25 x 25.7 cm)
- Weight – 22 Lbs (10 kg)
In the Box:
- Charger
- Mounting brackets
- Temperature sensor with 4.9′ (1.5 M) wire
- Instruction manual
*Sold as an Individual
Please contact your dealer for any returns, repairs or support issues related to this product.
| Weight | 22.75 g |
|---|---|
| Dimensions | 18 × 13 × 13 cm |
Brand
Victron Energy
No accessories available for this product.
No videos available for this product.
Related products
Electrical > Battery Chargers
MasterBus USB Interface The MasterBus USB Interface enables you to read and configure the MasterBus network via your PC. General specifications MasterBus powering: yes (when the PC is switched on) Dimensions, hxwxd: 2.6 x 3.1 x 1.3 inch Weight: 0.2 lb Delivered with: USB connection cable, MasterBus cable, MasterBus terminator, manual WARNING: This product can [...]
Electrical > Battery Chargers
Battery Charger Attwood’s Battery Charger is compact and perfect for your bench, garage or shop use. Overcharge, short circuit and reverse polarity protection provides years of worry free use. Provides 2 and 6 amp charge for 12V batteries. 6 amp charge for 6V batteries. Automatically switches to trickle charge mode after battery is fully charged. [...]
Electrical > Battery Chargers
Xantrex Battery Temperature Sensor (BTS) f/Freedom SW Series
Battery Temperature Sensor (BTS) f/Freedom SW Series The Battery Temperature Sensor (BTS) mounts on a terminal post of a battery in a bank or on the side of a battery and measures its temperature. It sends precise information to the charger or charge controller, which automatically adjusts voltage to help ensure full battery charge depending [...]
Electrical > Battery Chargers
1.5A Maintainer Charger Maintains charge on your battery. Features:120V AC input, 1.5 Amp, 12V DC outputCan be used as a portable maintainer or mountedMaintenance mode starts charging the battery when it falls below 12.8VShort circuit, reverse polarity and temperature protectedIncludes quick disconnect ring terminals and clampscETLus certified to cUL1236, CEC WARNING: This product can expose [...]
Electrical > Battery Chargers
Mastervolt ChargeMaster 25 Amp Battery Charger – 3 Bank, 12V
ChargeMaster 25 Amp Battery Charger – 3 Bank, 12V Power you can rely on. Always on course with Mastervolt… Mastervolt ensures you an electrical system with no weak links and a dependable and silent power supply. Whether for recreational or professional purposes, with Mastervolt you always have power you can rely on… The power to [...]
Electrical > Battery Chargers
Xantrex Battery Temperature Sensor (BTS) f/Freedom 458 Series
Battery Temperature Sensor (BTS) for Freedom 458 Series The Battery Temperature Sensor (BTS) is a replacement BTS designed for the Freedom 458 inverter/charger series. The sensor has a 15 foot cable attached and it mounts on a terminal post of a battery in a bank or on the side of a battery. It measures the [...]
Electrical > Battery Chargers
6A/12V 1 Bank 120V Input On-Board Battery Charger ChargePro onboard chargers have the same housing and mounting dimensions as our traditional Charge Pro Guest chargers with a number of performance enhancements. Features: Charge flooded and AGM batteries Microprocessor controlled for accurate charging Universal input 120/230V input for go-anywhere freedom Intuitive operation Isolated outputs Outputs can [...]
Electrical > Battery Chargers
P12 Battery Charger Display Intuitive Battery Monitoring The EV Battery Charger Display provides two options to monitor your battery banks. It can display a graphical representation of voltage for 1 to 3 battery banks with or without connection to a P12 Battery Charger. When connected to a P12 Battery Charger it can display the charger’s [...]