Victron Lynx Smart BMS 500 Battery MGMT System f/Lithium Smart Batteries
$1,067.00
9 in stock
Lynx Smart BMS 500 Battery MGMT System for Lithium Smart Batteries
The Lynx Smart BMS is a dedicated Battery Management System for Victron Lithium Smart Batteries. There are multiple BMS-es available for our Smart Lithium series of batteries, and the Lynx Smart is the most feature-rich and complete option.
Features:
- Built-in 500A contactor, used as a fall-back safety mechanism and also available as a remote controllable main systems switch
- Battery monitor, indicating the state of charge percentage and more data.
- Pre-alarm signal: provide a warning before the system shuts down due to -for example- a low cell.
- Bluetooth for use with our VictronConnect App, for setup and monitoring.
- Local and remote monitoring using a Victron GX device, for example, the Cerbo GX.
The Lynx Smart BMS is part of the modular Lynx distribution system.
Please contact your dealer for any returns, repairs or support issues related to this product.
| Weight | 4.6 g |
|---|---|
| Dimensions | 12 × 7 × 4 cm |
Brand
Victron Energy
Accessories
No videos available for this product.
Related products
Electrical > Battery Management
5510EDual Circuit Battery Switch CE Marked Ignition protected – Safe for installation aboard gasoline powered boats Case design allows surface or rear panel mounting Meets American Boat and Yacht Council (ABYC) requirements for battery switches 3/8" – 16 tin-plated copper studs for maximum conductivity and corrosion resistance, accepts 3/8" and M10 ring terminals 7/8" stud [...]
Electrical > Battery Management
8080 Single Circuit ON/OFF – Plus Main Installed Components: 2 6006 m-Series Switches 1 100A c-Series Flat Rocker Circuit Breaker Features: Isolates batteries and provides DC main circuit protection Ignition protected – Safe for installation aboard gasoline powered boats Isolates the Engine circuit from the House circuit Simplifies battery switch operation Protects electronics from sags [...]
Electrical > Battery Management
Cruiser Series Battery Selector Switch without AFD This battery switch can be used on 6, 12, 24 or 36V systems. Features: Polycarbonate case Surface mount Cable Lug Size: 3/8″ Dimensions: 5.50″ x 2.63″ WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, [...]
Electrical > Battery Management
3002 HD-Series Battery Switch Selector Features: 500 Ampere Continuous Rating Accepts 4/0 battery cables Ignition protected – safe for installation aboard gasoline powered boats .870″ (22.01mm) stud length to accept 4 or more cable terminals 1/2″ (M12) Tin-plated copper studs for maximum conductivity and corrosion resistance Meets American Boat and Yacht Council (ABYC) requirements for [...]
Electrical > Battery Management
9001e e-Series Battery Switch Selector Features: Make-before-break contact design allows switching between battery banks without power interruption CE Marked Ignition protected – Safe for installation aboard gasoline powered boats Case design allows surface or rear panel mounting Meets American Boat and Yacht Council (ABYC) requirements for battery switches 3/8″-16 tin-plated copper studs for maximum conductivity [...]
Electrical > Battery Management
Blue Sea 3003 HD-Series Battery Switch Selector w/Alternator Field Disconnect
3003 HD-Series Battery Switch Selector with Alternator Field Disconnect Features: 500 Ampere Continuous Rating Accepts 4/0 battery cables Ignition protected – safe for installation aboard gasoline powered boats .870″ (22.01mm) stud length to accept 4 or more cable terminals 1/2″ (M12) Tin-plated copper studs for maximum conductivity and corrosion resistance Meets American Boat and Yacht [...]
Electrical > Battery Management
Blue Sea 3001 HD-Series Battery Switch Single Circuit ON/OFF w/AFD
3001 HD-Series Battery Switch Single Circuit ON/OFF with AFD Features: 600 Ampere Continuous Rating Accepts two 4/0 battery cables per terminal Ignition protected – safe for installation aboard gasoline powered boats .870″ (22.01mm) stud length to accept multiple cable terminals 1/2″ (M12) Tin-plated copper studs for maximum conductivity and corrosion resistance Meets American Boat and Yacht [...]
Electrical > Battery Management
Single Circuit On/Off CE Marked Enables a failed House or Start battery bank to be isolated from the electrical system and both House and Start loads to be operated from the remaining battery bank Simplifies battery switch operation Isolates Start circuit from House circuit Protects electronics from sags and spikes caused by engine cranking Ignition [...]