Energy Meter VM-3P75CT Single + 3-Phase
The Victron VM-3P75CT energy meter is a standard device to measure the power and energy of single- and three-phase applications and calculates each phase's power values and broadcasts this over VE.Can or Ethernet with a high rate. It has built-in Ethernet and VE.Can ports for connecting to a GX device and the split-core current transformers enable easy and quick installation without modifying existing wiring.
The energy meter works out of the box (the firmware may need to be updated; details can be found in the Firmware Updates chapter) as a grid meter for systems with a MultiPlus and Quattro. Configuration (via VictronConnect) is only required for changing the role and manual IP configuration rather than the default DHCP. Its data is displayed on a GX device such as the Cerbo GX or Ekrano GX, as well as in VictronConnect and the VRM Portal.
Specifications:
- Voltage connection: Direct
- Input voltage range L-N: 85 to 265VAC
- Input voltage range L-L;150 to 460VAC
- Frequency: 50/60Hz
- Current connection: Via current transformers (included – wire length 640mm (25.2in)
- Rated current: 75A
- VE.Can communication port: Two RJ45 connectors (VE.Can terminators included)
- Ethernet communication port: One RJ45 connector, Modbus UDP
- Refresh rate: 100ms
- Type: Self-power supply via L1-N
- Switch or circuit breaker: Required as means of a disconnecting device – not included
- External fuse [1]: Required in the neutral conductor – 500mA, not included
- Consumption: 1.45W / 3.1VA
- Frequency: 50/60Hz
- Material & Color: Polycarbonate, blue (RAL5012)
- Voltage connection: Screw terminals 0.25 – 1.5mm2 (24 – 16AWG)
- Current transformer connection: Pluggable screw terminals (included)
- Protection category: IP20
- Weight: 370g (including packaging)
- Dimensions: 90 x 71 x 59mm (3.5 x 2.8 x 2.3in)
- Indoor/outdoor usage: Indoor only
- Operating temperature: From -10 to +55 °C
- Storage temperature: From -20 to +70 °C
- Relative humidity: < 90% non-condensing
- Altitude: 2000m (6562ft)
- Mains supply voltage fluctuations: ±0.1Vin
- Overvoltage category: Cat. III
- Pollution degree: 2
What's In The Box?
- Victron VM-3P75CT with 3 input terminal blocks
- 3x Split-core current transformer, wired ready for connection
- Wire length: 640mm (25.3")
- VE.Can terminators (2-pieces)
Please contact your dealer for any returns, repairs or support issues related to this product.
Brand
Victron Energy
No accessories available for this product.
Literature
Quick Guide: Download PDF
Videos
Video 1: Link
Related products
Electrical > Meters & Monitoring
Blue Sea 8003 DC Analog Voltmeter – 2-3/4″ Face, 8-16 Volts DC
DC Analog Voltmeter Backlit meter face Simple 2-wire connection Meter Senses Powers from same connection WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Electrical > Meters & Monitoring
Micro Ammeter Simple 2-wire connection Meter senses and powers from coil slipped over wire to be measured Includes AC current transformerBacklit meter face WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go [...]
Electrical > Meters & Monitoring
Blue Sea 8041 DC Analog Micro Ammeter – 2″ Face, 0-50 Amperes DC
DC Analog Micro Ammeter Shunt Type: External Simple 2-wire connection Meter Senses Powers from same connection Includes DC ShuntBacklit meter face WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Electrical > Meters & Monitoring
Shunt Shifter Shunt Adapter for DC Digital Ammeter positive side shunt applications, such as alternator measurement The Shunt Shifter is designed for use with Blue Sea Systems 8255 Digital Meter Shunt Advanced technology shifts the shunts positive reference to negative as required by digital meters Easily installs directly onto shunt using existing sense screws Ideal [...]
Electrical > Meters & Monitoring
AC Digital Multimeter with Alarm Displays amperage from 0 to 150 Amps Displays voltage from 80 to 270 Volts Displays power from 0 to 45 Kilowatts Displays frequency from 40 to 90 Hertz High and low voltage and high amperage alarms, both audio and visual 3 levels of display brightness Programmable sleep mode blanks display [...]
Electrical > Meters & Monitoring
Blue Sea 8245 AC Analog Micro Voltmeter – 2″ Face, 0-250 Volts AC
Micro Voltmeter Dial marked in 5 Volt increments Simple 2-wire connection to AC hot and neutral Meter senses and powers from same connection Backlit meter face WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For [...]
Electrical > Meters & Monitoring
Blue Sea 8252 DC Zero Center Analog Ammeter – 2-3/4″ Face, 50-0-50 Amperes DC
DC Zero Center Analog Ammeter Shunt Type: External Meters read both discharge and charge current Simple 2-wire connection from shunt – no other power required Meter senses and powers from shunt connection Includes appropriate DC shuntBacklit meter face WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of [...]
Electrical > Meters & Monitoring
DC Digital Multimeter w/ Alarm Displays amperage from -500 to +500 Amps Displays voltage from 0 to 60 Volts in 0.01 Volt increments High and low voltage, audio and visual alarms Standard meter operates in negative side of circuit only. Shunt Shifter required for positive side installation such as alternators 3 levels of display brightness [...]