VDB2 2-Position Distribution Block with Cover
T-Spec designed their VDB2 distribution block to handle the high-current power distribution for two (2) power sources while keeping your wiring connected securely and looking neat. You can also use this hefty little block to combine the ground wires of two (2) sources to a single grounding point. Solid black nickel-plated brass construction ensures reliable power flow, and an impact-resistant polycarbonate cover protects your connections from the weather.
Features:
- One (1) 1/0 to 4 AWG into two (2) 4/8 AWG out
- TPE wrapped soft touch
- Dual sizes gasket set
- Water-resistant
- Solid brass construction
- Black nickel finish
- T20 Torx® screws
- Gate lock technology
In the Box:
- Distribution block with one (1) 1/0 set-screw input and two (2) 4 or 8 AWG set-screw outputs
- Plastic cover (attached)
- 3 Rubber grommets and sleeves (pre-installed on input and outputs)
- Two 1/2″ screws
*Sold as an Individual
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
| Weight | 0.3 g |
|---|---|
| Dimensions | 6 × 4 × 2 cm |
Brand
T-Spec
No accessories available for this product.
No literature available for this product.
No videos available for this product.
Related products
Electrical > Busbars, Connectors & Insulators
CableClam .63″ Connector Opening (in): 0.63 Features: Perfect for antenna installation Waterproof co-axial installation without removing connectors Save the expense of removing and replacing connectors Avoid poor connections from removing factory connectors WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, [...]
Electrical > Busbars, Connectors & Insulators
2101 PowerPost Plus Cable Connector – 1/4″ Stud Enables connection of multiple smaller wires in spaces where a traditional bus bar may not fit. Features: 150AMP bus allows small wire connections at high amperage cable connections Connects high amperage cables securely Stud dimensions: 1/4″ x 1″ Base Material is Black Nylon 8231 GHS WARNING: This [...]
Electrical > Busbars, Connectors & Insulators
Blue Sea 2003 PowerPost High Amperage Cable Connector 3/8″ Stud
2003 PowerPost High Amperage Cable Connector 3/8″ Stud Insulated single stainless steel stud terminates multiple large conductors. Features: Connects high amperage cables securely Stud dimensions: 3/8″ x 7/8″ Base Material is PBT UL94 V0 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause [...]
Electrical > Busbars, Connectors & Insulators
2508 Terminal Block 30AMP – 8 Circuit Features: Closed back design completely insulates power from the mounting surface Each screw pair is 1 isolated circuit Jumpers allow creation of common circuits WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects [...]
Electrical > Busbars, Connectors & Insulators
2506 Terminal Block 30AMP – 6 Circuit Features: Closed back design completely insulates power from the mounting surface Each screw pair is 1 isolated circuit Jumpers allow creation of common circuits WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects [...]
Electrical > Busbars, Connectors & Insulators
1002 Cable Clam 0.8″ Features: Perfect for antenna installation Waterproof co-axial installation without removing connectors Save the expense of removing and replacing connectors Avoid poor connections from removing factory connectors WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or [...]
Electrical > Busbars, Connectors & Insulators
2510 Terminal Block 30AMP – 10 Circuit Features: Closed back design completely insulates power from the mounting surface Each screw pair is 1 isolated circuit Jumpers allow creation of common circuit WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects [...]
Electrical > Busbars, Connectors & Insulators
2708 BusBar Cover for PowerBar 2104 Specifications: Dimensions: 8.500″ x 3.375″ x 2.750″ WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.