Complete Spreader Kit for Radars & Satdomes for Mounts Ending in M2 – Black
This three-piece kit consists of a mid-section and two spreaders. Four bolts are used to secure each spreader to the midsection. The spreaders are tapered and angled aft so that whatever you decide to put on there will not interfere with the radar or satdome that you have on your mount. All the wiring from your GPS unit or antenna can be routed internally through the spreaders and into the mount itself. Not only does this help with security but it also makes for a very nice and clean installation. All the parts that make up the spreader kit are bolted together with rubber gaskets in between each part to prevent any water intrusion. Each spreader kit now comes with two S.S. 1-14 threaded adapters (SP7SS).
Brand
Seaview
No accessories available for this product.
Literature
Quick Guide: Download PDF
No videos available for this product.
Related products
Boat Outfitting > Radar/TV Mounts
2 Degree Wedge for Power Mount The most common planing attitude requires 3° – 4° of adjustment. If you are unsure which to choose then we recommend the 4° wedge. We do however offer 2° & 6° wedges if you feel a little more a little less is better for your application. Features: Pre-drilled mounting [...]
Boat Outfitting > Radar/TV Mounts
Seaview SM-18-U Universal Mast Mount Platform f/12″-18″ Radome
Universal Mast Mount Platform for 12″18″ Radome Seaview Mast Mounts are designed to have the radar or satdome as close as possible to the mast. Ultra heavy duty mounting feet and rivets are used to secure the Mast Mount to the mast. Adjustable Designed with fore and aft adjustable rails so that you can have [...]
Boat Outfitting > Radar/TV Mounts
Low Profile Adapter for 24″ Satdomes Seaview Low Profile Adapters are ideal for installations where space is limited due to their small mounting bases. All models feature a center channel that you can run all your satdome cables through. This allows for a nice clean installation. Reinforced with an anodized aluminum insert. This provides superior [...]
Boat Outfitting > Radar/TV Mounts
4 Degree Wedge for Open Array Radars Improve your radar performance with a Seaview direct mount Angled Wedge. This wedge angles your radar 4 degrees below the horizontal. Goes directly underneath your radar. Fits major brands such as Garmin, Raymarine, Simrad, Furuno & more! Simple and Easy Installation Pre-drilled to fit your specific radar, allowing [...]
Boat Outfitting > Radar/TV Mounts
Self Levelling Radar Mount – Mast Compatible Units: Garmin GMR18/GMR18HD/GMR24HD Raymarine RD218/RD424 Lowrance 3G Broadband Simrad 3G Broadband Simrad DX45/DX60 The Self-Levelling Mast Mount ensures your radar stays level with the horizon at all times for optimum antenna performance. As the boat heels or rolls, the radar is kept horizontal preventing target loss and giving [...]
Boat Outfitting > Radar/TV Mounts
SC104 Radar Pole Mount – 8′ Totally universal, the Scanstrut SC104 Pole Mount installs your radar onto the deck or transom of your boat. Supplied as a complete kit, you will have everything you need for a quick and easy installation. The anodized aluminium base gives choice when deciding where you wish to install the [...]
Boat Outfitting > Radar/TV Mounts
SC120 Lifting Crane This innovative lifting crane allows easy lifting and lowering of luggage, outboards etc and swings through 270°. Compatible with: Scanstrut SC Pole Mounts Features: Crane swings 270° Quick-release pins allow easy removal for storage Takes up minimal locker space when not in use Technical Specifications: Max lifting weight capacity – 66lbs (30kg) [...]
Boat Outfitting > Radar/TV Mounts
SC102 Radar Pole Mount – 8′ Totally universal, the Scanstrut SC102 Pole Mount installs your radar onto the deck or transom of your boat. Supplied as a complete kit, you will have everything you need for a quick and easy installation. The anodized aluminium base gives choice when deciding where you wish to install the [...]