Seaview 30″ Tapered Closed Dome AFT Leaning Radar Mount w/Removable Spreader & 10″ x 10″ Base Plate
$2,730.00
1 in stock
30″ Tapered Closed Dome AFT Leaning Radar Mount with Removable Spreader & 10″ x 10″ Base Plate
The Seaview Tapered Masts are for most 18″ to 24″ closed dome radars or open array radars up to 4.5′.
Durability
Unlike any other mount available, Seaview takes the finish to another level. We take these Tapered Masts in their raw aluminum form through a process called Chem Film. Chem Film is a chemical conversion coating that is used as a light coat of protective covering over aluminum. After the Chem Film process, it is taken through a 3 part epoxy prime and powder coat. This is all done to ensure the best possible finish and corrosion resistance.
Easy Installation
The lower mounting plate will accept most standard 18″ and 24″ radar domes or open array radars up to 4.5′ in length. No need to drill holes to mount your radar allowing for a quick and easy setup.
Spreaders
Spreaders are fitted with standard 1-14 threaded fittings made out of nylon to eliminate corrosion. (Note: do not exceed 4′ antennas on spreaders). The spreaders are also removable to keep shipping costs down.
Top Mounting Plate
Feel free to mount a light to the top mounting plate!
Cable Management
Oval hollow mast section allows for easy cable management.
| Weight | 41.5 g |
|---|---|
| Dimensions | 50 × 28 × 13 cm |
Brand
Seaview
No videos available for this product.
Related products
Boat Outfitting > Radar/TV Mounts
4 Degree Wedge for Open Array Radars Improve your radar performance with a Seaview direct mount Angled Wedge. This wedge angles your radar 4 degrees below the horizontal. Goes directly underneath your radar. Fits major brands such as Garmin, Raymarine, Simrad, Furuno & more! Simple and Easy Installation Pre-drilled to fit your specific radar, allowing [...]
Boat Outfitting > Radar/TV Mounts
Universal 24″ Radar Mast Platform Seaview Mast Mounts are designed to have the radar or satdome as close as possible to the mast. Ultra heavy duty mounting feet and rivets are used to secure the Mast Mount to the mast. Adjustable Designed with fore and aft adjustable rails so that you can have the radar [...]
Boat Outfitting > Radar/TV Mounts
Low Profile Adapter for 24″ Satdomes Seaview Low Profile Adapters are ideal for installations where space is limited due to their small mounting bases. All models feature a center channel that you can run all your satdome cables through. This allows for a nice clean installation. Reinforced with an anodized aluminum insert. This provides superior [...]
Boat Outfitting > Radar/TV Mounts
Scanstrut SPT2010 Base Wedge f/Stainless Steel PowerTower® – 4°
SPT2010 Base Wedge for Stainless Steel PowerTower® – 4° Enhance the performance of your radome with our tough, marine-grade, UV stable wedge that angles the radar down 4° below horizontal to provide a level horizon for your radar when the boat is underway. Compatible with: Stainless Steel Aft leaning PowerTower® Features: Enhance the performance of [...]
Boat Outfitting > Radar/TV Mounts
Seaview 4-Degree Wedge for Most Closed Dome Radars – 18″-24″ – White
4-Degree Wedge for Most Closed Dome Radars – 18″-24″ – White Improve your radar performance with a Seaview direct mount Angled Wedge. This wedge angles your radar 4 degrees below the horizontal. Goes directly underneath your radar. Fits major brands such as Garmin, Raymarine, Simrad, Furuno & more! Features: Simple and Easy Installation Pre-drilled to [...]
Boat Outfitting > Radar/TV Mounts
Self Levelling Radar Mount – Mast Devices Compatible with LMM-2 Self Levelling Radar Mount Furuno – 1621, 1622, 1623, 1715, 1835, DRS2D, DRS2D-NXT, DRS42DL, DRS42DL+, DRS4D / DRS4D-NXT, DRS4W, NavNet (18″), NavNet (24″) Humminbird – AS 21RD4KW Interphase – Mini RE-1, RE-8, RE-9 JRC– 1000, 1000mk2, 1066, 1500, 1500mk2 Koden – 2kW 12″, 4kW [RB715A] [...]
Boat Outfitting > Radar/TV Mounts
1-1/4″ Light Bar for Open Array Radar Seaview light bars are made from aluminum and powder coated brilliant white and are compatible with Seaview Modular Mounts (polished S.S. light bars also available). These light bars are 1.25″ in diameter. Different styles of light are available as well as numerous accessories for your light bar. Accessories [...]
Boat Outfitting > Radar/TV Mounts
7″ x 7″ Hinged Adapter *For 7″x7″ base plate.*Fits 5″ – 24″ tall radar mounts. The Seaview Hinge adapter is the ideal solution for someone who needs extra height clearance when storing their boat. This allows the user to have their Seaview mount hinge backwards. Available for Seaview mounts with a base dimension of 7″x7″, [...]