Jabsco Impeller Kit - 8 Blade - Neoprene - 2-9/16" Diameter x 3" W, 5/8" Shaft Diameter 
12″ Aft Leaning Camera Mount
Get the most out of your camera by using a Seaview Camera Mount. This Camera Mount is 12.5″ tall and is aft leaning. The four pre-drilled 7″ × 7″ base plate makes it very simple and easy to install.
Cable Management
A hollow oval mast section provides plenty of room for cable management.
Space Saving Design
The small 7″x 7″ base foot print makes this a great solution to an installation where space is an issue.
Fits:
- Raymarine – T200,T300,T400
- Flir – MD324, MD625, M625S, M625CS, M612L, M617CS, M618CS
- Comnav – Explorer V2, V3
| Weight | 6.4 g |
|---|---|
| Dimensions | 17 × 13 × 13 cm |
Brand
Seaview
Accessories
- Seaview Grey ABS Plastic Cable Seal - UV Stable - 1 Cable (2-10mm)
- Seaview Polished Stainless Steel Cable Seal - 1 Cable (2-10mm)
- Seaview Grey ABS Plastic Cable Seal - UV Stable - 2 Cables (2-15mm Each)
- Seaview Polished Stainless Steel Cable Seal - 2 Cables (2-15mm Each)
- Seaview Grey ABS Plastic Cable Seal - UV Stable - Multi Cables (up to 2-17mm Each)
- Seaview Polished Stainless Steel Cable Seal - Multi Cables (up to 2-17mm Each)
- Seaview Retrofit Cable Seal - Grey - Up to 0.39" (10mm) Diameter Cable
- Seaview Retrofit Cable Seal - Grey - Up to 0.67" (17mm) Diameter Cable
- BoatLIFE Silicone Rubber Sealant Cartridge - Clear
- BoatLIFE Silicone Rubber Sealant Cartridge - White
- BoatLIFE Silicone Rubber Sealant Cartridge - Black
- BoatLIFE Silicone Rubber Tube - 2.8 FL. Oz - Clear
- BoatLIFE Silicone Rubber Tube - 2.8 FL. Oz - White
- BoatLIFE Silicone Rubber Tube - 2.8 FL. Oz - Black
- Seaview Removable Base f/Pedestal Mounts w/7x7 Base Plate - White
No literature available for this product.
No videos available for this product.
Related products
Boat Outfitting > Radar/TV Mounts
SC120 Lifting Crane This innovative lifting crane allows easy lifting and lowering of luggage, outboards etc and swings through 270°. Compatible with: Scanstrut SC Pole Mounts Features: Crane swings 270° Quick-release pins allow easy removal for storage Takes up minimal locker space when not in use Technical Specifications: Max lifting weight capacity – 66lbs (30kg) [...]
Boat Outfitting > Radar/TV Mounts
Seaview AMA-16 Low Profile Satdome Adapter f/KVH, Raymarine, and Intellian
Low Profile Satdome Adapter for KVH, Raymarine, and Intellian Seaview Low Profile Adapters are ideal for installations where space is limited due to their small mounting bases. All models feature a center channel that you can run all your satdome cables through. This allows for a nice clean installation.
Boat Outfitting > Radar/TV Mounts
SC50 Adjustable Wedge for Satcom Mounts Designed to work with Scanstrut satcom mounts, you can quickly and easily provide a level mounting surface on any boat. Satcom antennas require a horizontal mounting surface to function correctly. Finding this on any powerboat is often difficult. This satcom wedge, eradicates this problem by providing a level [...]
Boat Outfitting > Radar/TV Mounts
Seaview 4-Degree Wedge for Most Closed Dome Radars – 18″-24″ – White
4-Degree Wedge for Most Closed Dome Radars – 18″-24″ – White Improve your radar performance with a Seaview direct mount Angled Wedge. This wedge angles your radar 4 degrees below the horizontal. Goes directly underneath your radar. Fits major brands such as Garmin, Raymarine, Simrad, Furuno & more! Features: Simple and Easy Installation Pre-drilled to [...]
Boat Outfitting > Radar/TV Mounts
PT3010 Base Wedge f/PowerTower® Radar Mounts – 4° Enhance the performance of your radome with our tough, marine-grade, UV stable wedge that angles the radar down 4° below horizontal to provide a level horizon for your radar when the boat is underway. Compatible with: Composite and Aluminum PowerTower® Features: Enhance the performance of your radome with [...]
Boat Outfitting > Radar/TV Mounts
Scanstrut SPT2010 Base Wedge f/Stainless Steel PowerTower® – 4°
SPT2010 Base Wedge for Stainless Steel PowerTower® – 4° Enhance the performance of your radome with our tough, marine-grade, UV stable wedge that angles the radar down 4° below horizontal to provide a level horizon for your radar when the boat is underway. Compatible with: Stainless Steel Aft leaning PowerTower® Features: Enhance the performance of [...]
Boat Outfitting > Radar/TV Mounts
Mast Mounts Still the first choice for boat owners the world over, Scanstrut Mast Mounts are the ultimate solution for mounting radars on yachts masts. Raising the antenna clear of any obstructions or interference, the mast mount is a classic and reliable installation. Features Easy and quick to install with all fastenings supplied Attached to [...]
Boat Outfitting > Radar/TV Mounts
Seaview AMA-18 Low Profile Adapter f/Intellian, KVH, Raymarine and Sea-Tel
Low Profile Adapter for Intellian, KVH, Raymarine and Sea-Tel Seaview Low Profile Adapters are ideal for installations where space is limited due to their small mounting bases. All models feature a center channel that you can run all your satdome cables through. This allows for a nice clean installation. *Reinforced with an anodized aluminum insert. [...]