Blue Sea 8072 Panel Blank Single A-Series 
Garmin Power/Data Cable f/Fishfiner 300C & 400C & GPSMAP® 400 & 500 Series 
Bennett VP1135G Solenoid Valve - Green 
Zinc Anode Kit
The Actuators on each Seakeeper Ride controller have sacrificial anodes that need to be periodically inspected and replaced when about half of the anode has worn down.
Installation
- Remove the blade by unscrewing the four (4) M8-1.25 x 20mm screws and their washers.
- Unscrew the two (2) M4-0.7 x 12 mm bolts holding the zinc sacrificial anode.
- Attach the new zinc sacrificial anode using the two (2) M4-0.7 x 12mm bolts and tighten to 20 in-lbs (2.3 N-m).
- Reattach the Blade using the four (4) M8-1.25 x 20mm screws and their washers. Be sure to use thread-locking sealant with an activator/primer when reinstalling hardware. Torque these four (4) bolts to 80 in-lbs (9.0 N-m) in an “X” pattern.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
| Weight | 0.8 g |
|---|---|
| Dimensions | 3 × 3 × 3 cm |
Brand
Seakeeper Ride
No accessories available for this product.
No literature available for this product.
No videos available for this product.
Related products
Boat Outfitting > Trim Tab Accessories
Bennett actuators are strong but flexible nylon/fiberglass hydraulic cylinders. The piston-like arms push tabs into position. Fluid flows through a concealed hole in the upper hinge at the top of the actuator – thus eliminating external hoses subject to damage. A1200S is designed for installations where space is limited. WARNING: This product can expose you [...]
Boat Outfitting > Trim Tab Accessories
Auto Tab Retractor Automatically retracts tabs when boat?s ignition is turned off. Trailered or dry storage boats have added defense from trim tab damage with them “full-up” during hauling, trailering and storage. Ensures trim tabs are all the way up every time boat is started if boat is not equipped with trim tab indicators. Easily [...]
Boat Outfitting > Trim Tab Accessories
Actuator Lower Hinge w/Pin WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues [...]
Boat Outfitting > Trim Tab Accessories
Impact resistant, fiberglass reinforced nylon cylinders eliminates expansion and resists ultra-violet rays. Two expanding type seals, plus O-ring, eliminates high and low pressure leaks. Barbed cylinder fitting and an inserted tubular rod prevents hose blow-off and breakage. Cylinder is 7 1/2 inches eye to eye when closed.
Boat Outfitting > Trim Tab Accessories
Euro-Style Rocker Switch Control This control is ergonomically designed, water resistant and provides a positive “click” when the trim tabs are engaged. Its lockout feature prevents user from pressing down on opposite directions at the same time. The control is easy to install, fitting into any existing Bennett 2 1/2-inch Rocker Switch hole. WARNING: This [...]
Boat Outfitting > Trim Tab Accessories
Lenco 101XD Extreme Duty Actuator – 12V – 2-1/4″ Stroke – 5/16″ Hardware
101 XD Actuator- 12 Volt- 2-1/4 Stroke with Mounting Hardware The 101 XD Actuator is used mostly with HD, XD, High Performance and Super Strong tabs. 2.25 stroke. Overall length (tip to tip) is 113/8 inches. Instant response electric actuators are made of high impact glass fiber filled, ultraviolet-resistant nylon material with 316 super buff [...]
Boat Outfitting > Trim Tab Accessories
Insta-Trim Boat Leveler 12 Volt Solenoid Valve with White Wire. They are custom designed for Insta-Trim Boat Leveler Co., epoxy sealed and humidity resistant, thereby preventing shorting out. The solenoids lock the tabs in any position, eliminating driftback. Barb type hose fittings provide tight, secure connections.
Boat Outfitting > Trim Tab Accessories
Lenco 101XD Extreme Duty Actuator – 24V – 2-1/4″ Stroke – 5/16″ Hardware
101 XD Actuator- 24 Volt- 2-1/4 Stroke with Mounting Hardware The 101 XD Actuator is used mostly with HD, XD, High Performance and Super Strong tabs. 2.25 stroke. Overall length (tip to tip) is 113/8 inches. Instant response electric actuators are made of high impact glass fiber filled, ultraviolet-resistant nylon material with 316 super [...]