UFlex Power A Electronic Control Package - Dual Engine/Dual Station - Electronic Throttle/Electronic Shift 
Aluminum Anode Kit
The Actuators on each Seakeeper Ride controller have sacrificial anodes that need to be periodically inspected and replaced when about half of the anode has worn down.
Installation
- Remove the blade by unscrewing the four (4) M8-1.25 x 20mm screws and their washers.
- Unscrew the two (2) M4-0.7 x 12 mm bolts holding the sacrificial anode.
- Attach the new aluminum sacrificial anode using the two (2) M4-0.7 x 12mm bolts and tighten to 20 in-lbs (2.3 N-m).
- Reattach the blade using the four (4) M8-1.25 x 20mm screws and their washers. Be sure to use thread-locking sealant with an activator/primer when reinstalling hardware. Torque these four (4) bolts to 80 in-lbs (9.0 N-m) in an “X” pattern.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
| Weight | 0.35 g |
|---|---|
| Dimensions | 3 × 3 × 3 cm |
Brand
Seakeeper Ride
No accessories available for this product.
No literature available for this product.
No videos available for this product.
Related products
Boat Outfitting > Trim Tab Accessories
Actuator Lower Hinge Pin WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues [...]
Boat Outfitting > Trim Tab Accessories
Actuator Lower Hinge WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or [...]
Boat Outfitting > Trim Tab Accessories
101 Actuator- 12 Volt- 2-1/4 Stroke with Mounting Hardware The 101 Actuator is used in all Standard, Edge Mount and Standard Performance kits. 2.25 stroke. Overall length (tip to top) is 12.5 inches. Instant response electric actuators are made of high impact glass fiber filled, ultraviolet-resistant nylon material with 316 super buff stainless steel tubing. [...]
Boat Outfitting > Trim Tab Accessories
Hydraulic Power Unit A compact powerhouse that creates hydraulic pressure to lower and raise the trim tabs. It employs two solenoid valves to direct the flow of fluid to the actuators. The solenoid valves lock tightly to secure the tabs in place. Strength to lower and hold even the largest tabs in place. Lexan cover [...]
Boat Outfitting > Trim Tab Accessories
Upper Hinge Bennett’s A1103 Upper Hinge of the A1101 Actuator Assembly. Fluid throws through the upper hinge at the top of the actuator – thus eliminating external hoses subject to damange. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive [...]
Boat Outfitting > Trim Tab Accessories
Insta-Trim boat leveler’s electronic tab locator shows theposition of your tabs. Two seperate lines of diode lampsaccurately indicate the position of each tab. the screen issmall, mounts on the dashboard, and is designed tomatch your rocker type controls in size and appearance.The detectors are rugged and attach easily and quickly toeach hydraulic cylinder. The attached [...]
Boat Outfitting > Trim Tab Accessories
Solenoid valves direct the flow of fluid to the actuators. The solenoid valves lock tightly to secure the tabs in place. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may [...]
Boat Outfitting > Trim Tab Accessories
Lenco 101XD Extreme Duty Actuator – 12V – 2 1/4″ Stroke – 3/8″ Hardware
101 XD Actuator- 12 Volt- 2-1/4 Stroke with Mounting Hardware The 101 XD Actuator is used mostly with HD, XD, High Performance and Super Strong tabs. 2.25 stroke. Overall length (tip to tip) is 113/8 inches. Instant response electric actuators are made of high impact glass fiber filled, ultraviolet-resistant nylon material with 316 super [...]