Aluminum Anode Kit
The Actuators on each Seakeeper Ride controller have sacrificial anodes that need to be periodically inspected and replaced when about half of the anode has worn down.
Installation
- Remove the blade by unscrewing the four (4) M8-1.25 x 20mm screws and their washers.
- Unscrew the two (2) M4-0.7 x 12 mm bolts holding the sacrificial anode.
- Attach the new aluminum sacrificial anode using the two (2) M4-0.7 x 12mm bolts and tighten to 20 in-lbs (2.3 N-m).
- Reattach the blade using the four (4) M8-1.25 x 20mm screws and their washers. Be sure to use thread-locking sealant with an activator/primer when reinstalling hardware. Torque these four (4) bolts to 80 in-lbs (9.0 N-m) in an “X” pattern.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
| Weight | 0.35 g |
|---|---|
| Dimensions | 3 × 3 × 3 cm |
Brand
Seakeeper Ride
No accessories available for this product.
No literature available for this product.
No videos available for this product.
Related products
Boat Outfitting > Trim Tab Accessories
Hydraulic Tubing – 20 foot coil WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with [...]
Boat Outfitting > Trim Tab Accessories
Auto Tab Retractor Automatically retracts tabs when boat?s ignition is turned off. Trailered or dry storage boats have added defense from trim tab damage with them “full-up” during hauling, trailering and storage. Ensures trim tabs are all the way up every time boat is started if boat is not equipped with trim tab indicators. Easily [...]
Boat Outfitting > Trim Tab Accessories
Boat Leveler 12vdc Universal Trim Tab Pump with Oil and Hose Fittings
Universal Motor Pump Pump has adjustable pressure relief valve set at 400psi. Builit in bypass so fluid circulates so that pump will not stall. Motor has thermal overload protection. Includes all necessary fittings for a 12 volt single cylinder system. Kit contains Biodegradable oil and funnel. Heavy duty solenoid vales that lock cylinder in place. [...]
Boat Outfitting > Trim Tab Accessories
Insta-Trim boat leveler’s electronic tab locator shows theposition of your tabs. Two seperate lines of diode lampsaccurately indicate the position of each tab. the screen issmall, mounts on the dashboard, and is designed tomatch your rocker type controls in size and appearance.The detectors are rugged and attach easily and quickly toeach hydraulic cylinder. The attached [...]
Boat Outfitting > Trim Tab Accessories
Upper Hinge Bennett’s A1103 Upper Hinge of the A1101 Actuator Assembly. Fluid throws through the upper hinge at the top of the actuator – thus eliminating external hoses subject to damange. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive [...]
Boat Outfitting > Trim Tab Accessories
101 Actuator- 12 Volt- 2-1/4 Stroke with Mounting Hardware The 101 Actuator is used in all Standard, Edge Mount and Standard Performance kits. 2.25 stroke. Overall length (tip to top) is 12.5 inches. Instant response electric actuators are made of high impact glass fiber filled, ultraviolet-resistant nylon material with 316 super buff stainless steel tubing. [...]
Boat Outfitting > Trim Tab Accessories
Hydraulic Power Unit A compact powerhouse that creates hydraulic pressure to lower and raise the trim tabs. It employs two solenoid valves to direct the flow of fluid to the actuators. The solenoid valves lock tightly to secure the tabs in place. Strength to lower and hold even the largest tabs in place. Lexan cover [...]
Boat Outfitting > Trim Tab Accessories
Biodegradable Oil & Funnel Kit Biodegradable oil should be used only after motor pump is mounted to boat in vertical position, remove plug and add. Funnel also included.