Rule-Mate 2000 GPH 24 Volt Fully Automated Bilge Pump
The Rule-Mate® 2000 GPH pump consists of a powerful Rule® bilge pump and a highly intelligent circuit board in a single housing. The pump activated when the water reaches 2-1/2″ and automatically shuts off when the pump senses no water against the impeller, reducing the remaining water to approximately 5/8″.
Rule-Mate Intelligence
Rule-Mate Bilge pumps have built-in programming that can sense when the pump is running but not pumping water. This is a very unique feature to bilge pumps because it protects the pump and the vessel, especially the vessels batteries. If debris fouls the sensor or the pump becomes air-bound, the pump will stop running and begin to “check” for water every 2-1/2 minutes. Once the debris is removed, the pump will revert to its normal operation, turning on when the water reaches 2-1/2″ and shutting off at 5/8″.
- 2000 GPH (7570 LPH) at 0′ (27.2V)
- All-in-one pump and switch
- Extra long life heavy duty motor
- 1″ NPS discharge with 1″ AND 1 1/8″ screw-on ports
- Three year warranty
WARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
| Weight | 4.35 g |
|---|---|
| Dimensions | 8 × 7 × 5 cm |
Brand
Rule
Accessories
Literature
Owners Manual: Download PDF
Videos
Video 1: Link
Related products
Marine Plumbing & Ventilation > Bilge Pumps
1500 G.P.H. Automatic Bilge Pump High pumping capacity and reliability at a lower cost. The Rule 1500 offers more pumping capacity and more exclusive design features than any comparable competitive pump. 1-1/8″ (28.6mm) discharge outlet. 12 Volts DC unless noted. Features: Computerized operation – no float switch required 3 wire version allows manual override or [...]
Marine Plumbing & Ventilation > Bilge Pumps
Rule 1500Non-Automatic 24v High pumping capacity and reliability at a lower cost. The Rule 1500 offers more pumping capacity and more exclusive design features than any comparable competitive pump. 1-1/8″ (28.6mm) discharge outlet. FEATURES Fully Submersible Easy clean snap lock strainer Silent and vibrationless operation Anti-airlock protection Compact, efficient long life motor Ignition protected No [...]
Marine Plumbing & Ventilation > Bilge Pumps
Rule 1100 Replacement Motor F/ Tournament Series Livewell Pump
1100 Replacement Motor F/ Tournament Series Livewell Pump Rule 47DR 12v 1100 GPH Replacement Motor for Rule 405FC Livewell – Baitwell pump. WARNING: This product can expose you to chemicals including STYRENE which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
Marine Plumbing & Ventilation > Bilge Pumps
Rule-A-Matic® Float Switchw/ Fuse Holder Year after year, the Rule-A-Matic has been the switch of choice for boaters the world over. Our latest design now includes a removable base for easy cleaning and servicing, a mercury free snap switch tested to over one million cycles and marine grade blocked wire. Designed for pumps drawing up [...]
Marine Plumbing & Ventilation > Bilge Pumps
Rule 3700 Heavy duty construction for both commercial and pleasure boat use; known for trouble free operation and reliability. 1-1/2″ (38mm) discharge outlet. 12 Volts DC unless noted. Features: Fully Submersible Easy clean snap lock strainer Silent and vibrationless operation Anti-airlock protection Compact, efficient long life motor Ignition protected No burn-out when run dry Rust [...]
Marine Plumbing & Ventilation > Bilge Pumps
Rule 4000Non-Automatic 12v Designed for the toughest applications, the 4000 gph (15140 lph) pump optimizes Rule’s exclusive design features to produce the highest capacity available for a pump its size. 2″ (51mm) discharge outlet. 12 Volts DC unless noted. Voltage: 12 Vdc Amp Draw: 15.5 amp Fuse Size 25 amp Height: 7 3/4 inches 196.8 [...]
Marine Plumbing & Ventilation > Bilge Pumps
Water Puppy (US) Features: Small bilge debris present no problem to these bronze bodied, flexible impeller pumps Simple design means fewer wearing parts ISO 8846 MARINE (Ignition protection) ISO 8849 MARINE (Bilge pump standard) Flow rate: 23.8 Litres/min (6.3 USgallons/min) Self-priming from dry up to 1.2m (4ft) Body: Bronze Impeller: Neoprene Seal: Lip type Voltage: [...]
Marine Plumbing & Ventilation > Bilge Pumps
110v Sump Pump Designed to remove water from basements, garages, stairwells, utility rooms, backyards, sumps, pools, pool covers, boats, and other utility applications. 1800 gph24′ CordAutomatic WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and BISPHENOL A (BPA) which is [...]