Rule-Mate 2000 GPH 12 Volt Fully Automated Bilge Pump
The Rule-Mate® 2000 GPH pump consists of a powerful Rule® bilge pump and a highly intelligent circuit board in a single housing. The pump activated when the water reaches 2-1/2″ and automatically shuts off when the pump senses no water against the impeller, reducing the remaining water to approximately 5/8″.
Rule-Mate Intelligence
Rule-Mate Bilge pumps have built-in programming that can sense when the pump is running but not pumping water. This is a very unique feature to bilge pumps because it protects the pump and the vessel, especially the vessels batteries. If debris fouls the sensor or the pump becomes air-bound, the pump will stop running and begin to “check” for water every 2-1/2 minutes. Once the debris is removed, the pump will revert to its normal operation, turning on when the water reaches 2-1/2″ and shutting off at 5/8″.
- 2000 GPH (7570 LPH) at 0′ (13.6V)
- All-in-one pump and switch
- Extra long life heavy duty motor
- 1″ NPS discharge with 1″ AND 1 1/8″ screw-on ports
- Three year warranty
WARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
| Weight | 4.3 g |
|---|---|
| Dimensions | 8 × 7 × 5 cm |
Brand
Rule
Accessories
Literature
Owners Manual: Download PDF
Videos
Video 1: Link
Related products
Marine Plumbing & Ventilation > Bilge Pumps
3-Way Panel Lighted Switch Controls any pump equipped with an automatic float switch. Toggle has three positions (automatic, off, or manual) and has a “fail safe” spring return to “off” from the “manual” position. Panel is black stainless steel and has red indicator light and fuse holder. WARNING: This product can expose you to chemicals [...]
Marine Plumbing & Ventilation > Bilge Pumps
Rule 3700 Heavy duty construction for both commercial and pleasure boat use; known for trouble free operation and reliability. 1-1/2″ (38mm) discharge outlet. 12 Volts DC unless noted. Features: Fully Submersible Easy clean snap lock strainer Silent and vibrationless operation Anti-airlock protection Compact, efficient long life motor Ignition protected No burn-out when run dry Rust [...]
Marine Plumbing & Ventilation > Bilge Pumps
ECO-Switch The Rule ECO-Switch is an ecologically sound automatic bilge pump control control switch. Featuring a non-mercury design, the pump operates with simple air pressure. As water rises in the bilge, air rises in the air tube that is attached to switch. This air pressure activates the switch which controls your pump. There are no [...]
Marine Plumbing & Ventilation > Bilge Pumps
Rule 2000Non-Automatic 12v, UL listed w/ 6′ wire leads Engineered to commercial standards. The Rule 2000 is the best selling high capacity submersible bilge pump in the world. 1-1/8″ (28.6mm) discharge outlet. FEATURES Fully Submersible Easy clean snap lock strainer Silent and vibrationless operation Anti-airlock protection Compact, efficient long life motor Ignition protected No burn-out [...]
Marine Plumbing & Ventilation > Bilge Pumps
Rule-A-Matic® Float Switch Year after year, the Rule-A-Matic has been the switch of choice for boaters the world over. Our latest design now includes a removable base for easy cleaning and servicing, a mercury free snap switch tested to over one million cycles and marine grade blocked wire. Designed for pumps drawing up to 14 [...]
Marine Plumbing & Ventilation > Bilge Pumps
Hi-Water Bilge Alarm The High Water Bilge Alarm consists of a non-mercury float switch and an in-dash gauge that features both a visual and an audible 85 db alarm. This unit allows an unmanned com part ment to be constantly monitored. For additional compartments add additional Rule Float Switches. Complies with CFR 182.530 which requires [...]
Marine Plumbing & Ventilation > Bilge Pumps
3-Way Lighted Rocker Panel Switch Controls any pump equipped with an automatic float switch. This unit features a black plastic panel. It has a built-in fuse holder and an internally lighted rocker switch with 3 positions (automatic, off, or manual) with the Rule “fail-safe” spring return to “off” from the “manual” position. WARNING: This product [...]
Marine Plumbing & Ventilation > Bilge Pumps
Rule 2000 Engineered to commercial standards. The Rule 2000 is the best selling high capacity submersible bilge pump in the world. 1-1/8″ (28.6mm) discharge outlet. 12 Volts DC unless noted. Features: Fully Submersible Easy clean triple stage snap lock strainer Silent and vibrationless operation Anti-airlock protection Compact, efficient long life motor Ignition protected No burn-out [...]