500GPH Standard Bilge Pump – 12V
Customers talk about flow, they want the water out of the bilge, and
fast. Improved design and performance means that our next generation 500GPH pump will produce this flow at just 12V rather than 13.6V as previously required…more typical of on board voltage supply.
Our next generation of Rule pumps include check valves and to do this, we’ve created hidden air vent to prevent airlocking. Under each strainer tab there is a small hole that vents any air trapped in the pump housing preventing airlocks…and that’s how we do it.
We have true electromagnetic suppression (EMC). We have a built-in thermal cell that protects the pump and the vessel when things get too hot.
We’ve re-engineered the inside and outside of our bilge pumps, starting with a blank slate. And we’re just getting started
Features:
- Non-automatic – used with a panel switch or Rule float switch
- Submersible and Ignition Protected
- High efficiency, low amp motor
- Stainless-steel shaft
- Includes backflow preventer
WARNING: This product can expose you to chemicals including 1,3-Butadiene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
| Weight | 0.8 g |
|---|---|
| Dimensions | 7 × 7 × 4 cm |
Brand
Rule
Accessories
- Rule ECO-Switch Automatic Bilge Pump Switch
- Rule-A-Matic® Plus™ Float Switch
- Rule-A-Matic® Float Switch
- Rule-A-Matic® Float Switch w/Fuse Holder
- BoatLIFE Silicone Rubber Sealant Cartridge - Clear
- BoatLIFE Silicone Rubber Sealant Cartridge - White
- BoatLIFE Silicone Rubber Tube - 2.8 FL. Oz - Clear
- BoatLIFE Silicone Rubber Tube - 2.8 FL. Oz - White
Literature
Brochure: Download PDF
No videos available for this product.
Related products
Marine Plumbing & Ventilation > Bilge Pumps
Rule 1500Non-Automatic 24v High pumping capacity and reliability at a lower cost. The Rule 1500 offers more pumping capacity and more exclusive design features than any comparable competitive pump. 1-1/8″ (28.6mm) discharge outlet. FEATURES Fully Submersible Easy clean snap lock strainer Silent and vibrationless operation Anti-airlock protection Compact, efficient long life motor Ignition protected No [...]
Marine Plumbing & Ventilation > Bilge Pumps
Hi-Water Bilge Alarm The High Water Bilge Alarm consists of a non-mercury float switch and an in-dash gauge that features both a visual and an audible 85 db alarm. This unit allows an unmanned com part ment to be constantly monitored. For additional compartments add additional Rule Float Switches. Complies with CFR 182.530 which requires [...]
Marine Plumbing & Ventilation > Bilge Pumps
Rule 3700 Heavy duty construction for both commercial and pleasure boat use; known for trouble free operation and reliability. 1-1/2″ (38mm) discharge outlet. 12 Volts DC unless noted. Features: Fully Submersible Easy clean snap lock strainer Silent and vibrationless operation Anti-airlock protection Compact, efficient long life motor Ignition protected No burn-out when run dry Rust [...]
Marine Plumbing & Ventilation > Bilge Pumps
Handy Boy Utility Pump Versatile polished brass multi-purpose hand pump Drain, fill or top up engine and gearbox oil Overcomes problem of hard to reach drain plugs and filler caps Oil and corrosion resistant brass neoprene construction with up to 1 1/2 GPM output 1001 other uses on any boat WARNING: This product can expose [...]
Marine Plumbing & Ventilation > Bilge Pumps
3-Way Lighted Rocker Panel Switch Controls any pump equipped with an automatic float switch. This unit features a black plastic panel. It has a built-in fuse holder and an internally lighted rocker switch with 3 positions (automatic, off, or manual) with the Rule “fail-safe” spring return to “off” from the “manual” position. WARNING: This product [...]
Marine Plumbing & Ventilation > Bilge Pumps
Rule 3700 Heavy duty construction for both commercial and pleasure boat use; known for trouble free operation and reliability. 1-1/2″ (38mm) discharge outlet. 12 Volts DC unless noted. Features: Fully Submersible Easy clean snap lock strainer Silent and vibrationless operation Anti-airlock protection Compact, efficient long life motor Ignition protected No burn-out when run dry Rust [...]
Marine Plumbing & Ventilation > Bilge Pumps
3-Way Panel Lighted Switch Controls any pump equipped with an automatic float switch. Toggle has three positions (automatic, off, or manual) and has a “fail safe” spring return to “off” from the “manual” position. Panel is black stainless steel and has red indicator light and fuse holder. WARNING: This product can expose you to chemicals [...]
Marine Plumbing & Ventilation > Bilge Pumps
Rule-A-Matic® Float Switchw/ Fuse Holder Year after year, the Rule-A-Matic has been the switch of choice for boaters the world over. Our latest design now includes a removable base for easy cleaning and servicing, a mercury free snap switch tested to over one million cycles and marine grade blocked wire. Designed for pumps drawing up [...]