Wire Harness f/10″-30″ Light Bar
This 11′ wiring harness is designed to connect a single 10″-30″ LED light bar to your 12V electrical system. It features battery terminals on one end and a Deutsch connector on the other to connect to the light. It incorporates an inline fuse holder, a 12V relay, and a waterproof switch. This harness is compatible with the following RIGID Industries LED Lights: 10″ E-Series, 10″ SR-Series, 20″ E-Series, 20″ SR-Series, 30″ E-Series, 30″ SR-Series, 40″ E-Series, 40″ SR-Series.
Features:
- 16 AWG Wire
- Deutsch Connector
- Inline Fuse Holder
- 12 Volt Relay
| Weight | 0.85 g |
|---|---|
| Dimensions | 6 × 6 × 1 cm |
Brand
RIGID Industries
No accessories available for this product.
No literature available for this product.
No videos available for this product.
Related products
Lighting > Accessories
ACR URC-102 Master Controller f/RCL-50 & RCL-100 Searchlight
URC-102 Master Controller for RCL-50 and RCL-100 Searchlight Replacement controller which controls On/Off, rotation speed and the XRCiZ feature of the RCL-50 and RCL-100 searchlights. Compatible With: RCL-50 and RCL-100 searchights *Not compatible with RCL 100-LED In the Box: URC-102 Controller Connectors *Sold as an Individual WARNING: This product can expose you to chemicals including [...]
Lighting > Accessories
Perko Locking Collar Pole Light Mounting Base – 2 Pin – Chrome Plated w/Black Cover
Locking Collar Pole Light Mounting Base (2 Pin) – Plug-In Type Base5° Rake Construction Chrome Plated Zinc Alloy Black Plastic Waterproof snap-on cover Pigtail Leads Fits Figs. 1343, 1348, 1400, 1445, 1451, 1455, 1456, 1465 and 1470 Series All-Round Pole Lights
Lighting > Accessories
LightLink LL-101 Marine Dimming ModulePart #: LL-101 Operation is simple! Press and hold the momentary switch to initiate dimming cycle. Dimming cycle continues to dim as long as switch is engaged, ranging from 100% to approximately 5% intensity holding 2 seconds at each position before dimming the opposite direction. Briefly press and release momentary switch [...]
Lighting > Accessories
ACR Universal Remote Control Kit f/RCL-50 & RCL-100 Searchlight
Universal Remote Control Kit for RCL-50 and RCL-100 Searchlight Control an ACR spotlight from any place on a vessel with fingertip control and accuracy This controller can be surface or flush mounted. Compatible With: RCL-50 and RCL-100 *Not compatible with RCL 100-LED In the Box: URC-102 Master controller URP-102 Point Pad™ Connectors Coaxial cable – [...]
Lighting > Accessories
Wired Bridge Remote Power: 12 or 24 Volt (Hard Wired)Current draw (idle / in use):negligibleDimensions: 3.5″W x 2.25″H x .75″D (88 x 57 x 19 mm)Weight:2.12 oz (60g)Housing material: UV resistant PC/ASAButton material: Silicone (glow in the dark)Operating temp range: 5°F – 113°F (-15°C – 45°C) IP Rating: IP54 WARNING: This product can expose you [...]
Lighting > Accessories
URP-102 Point Pad™ for ACR Searchlights Control an ACR spotlight from any place on a vessel with fingertip control and accuracy This controller can be surface or flush mounted. In the Box: Point Pad™ URP-102 remote Flush and surface mount case Gaskets (surface and Flush) Mounting hardware Instruction manual *Sold as an Individual WARNING: This [...]
Lighting > Accessories
DMX Touch Panel Controller The DMX touch panel controller allows you to communicate with all the lights in the system as a complete lighting system. At least one DMX control panel is required to control Pro Series Colours model lights, whether you choose this model or the Wi-Fi model.
Lighting > Accessories
Oval 2-Pin Base f/Angled Pole – BlackPart #: 91022-7 These 2-pin bases for angled pole lights with locking collars are well-suited for rough conditions or long poles. Features a soft rubber cover with a molded-in gasket to protect the socket from moisture and debris when pole light is stowed away. Provides a 2-pin socket and [...]