RAM Motorcycle Handlebar Clamp Base with M8 Screws
Your motorcycle rides on rubber tires for grip and to soften the ride. Why should it be any different for your mounted electronics? With RAM’s patented rubber ball and socket technology, the turn of a single knob grips the adjustment arm to a rubber ball designed to dampen shock and vibration. With RAM products, it’s all grip and no slip plus protection for your valuable electronics. Simply place our easy to install ball base onto the motorcycle handlebar top clamp and you’re done. After that, a world of mounting possibilities just opened up.
Included:
(1 QTY) 1″ Rubber ball
(1 QTY) M8 x 55 bolt (1.25 thread pitch)
(1 QTY) M8 x 60 bolt (1.25 thread pitch)
(1 QTY) M8 x 65 bolt (1.25 thread pitch)
Attachment Point:
Motorcycle handlebar top clamp, any bike that uses an M8 threaded bolt.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1″ Rubber Ball “B” Size
Note:
The “U” in the part number reflects product packaged in poly bag.
| Weight | 0.2 g |
|---|---|
| Dimensions | 3 × 1 × 1 cm |
Brand
RAM Mounting Systems
Accessories
No literature available for this product.
No videos available for this product.
Related products
Ram Mount Store > B Size
RAM 1.5″ x 1.75″ Base 5/16″ Hole & 1″ Ball This Mirror Plate with 1″ Mounting Ball (RAM-B-126C) connects to the back of the RAM Convex Rearvision Mirror (RAM-B-126M) has dimensions 7″ H x 14″ L. The mounting ball allows the mirror to be connected to the RAM Ball and Socket system so you can [...]
Ram Mount Store > B Size
RAM Double 1″ Ball Adapter The RAM-B-230U, double ball joiner, consists of a 1″ rubber ball on both ends that allow the connection of two 1″ socket arms. When measured from ball center to ball center the arm length is 1.75″. This mount is ideal if the your mount arm is just too short. Material: [...]
Ram Mount Store > B Size
2″ x 2.5″ Diameter Base w/1″ Ball The RAP-B-202U-225, high strength composite flat surface base, contains a 1″ diameter rubber ball connected at right angles to a 2″ x 2.5″ rectangular base. This mount has pre-drilled holes at each corner of the base plate. Material: High Strength Composite Ball Size: 1″ Rubber Ball “B” Size [...]
Ram Mount Store > B Size
RAM 2″ x 4″ Rectangle Base w/1″ Ball The RAM-B-202U-24 contains a 1″ diameter rubber ball connected at right angles to a 2″ x 4″ rectangular base. This mount has pre-drilled holes at each corner of the base plate. Material: Powder Coated Marine Grade Aluminum Ball Size: 1″ Rubber Ball “B” Size Note: The “U” [...]
Ram Mount Store > B Size
RAM 2″ x 3″ Rectangle Base w/1″ Ball The RAM-B-202U-23 contains a 1″ diameter rubber ball connected at right angles to a 2″ x 3″ rectangular base. This mount has pre-drilled holes at each corner of the base plate. Material: Powder Coated Marine Grade Aluminum Ball Size: 1″ Rubber Ball “B” Size Note: The “U” [...]
Ram Mount Store > B Size
RAM Yoke Clamp Base with 1″ Rubber Ball and 1/4-20″ Tap for Camera or Video The RAM-B-121BAU, yoke clamp mount with 1/4″-20 thread, will fit rails from 0.625″ to 1.25″ in diameter. The 1″ rubber ball is set at a right angle to the plane of the mount, so when connected to a rail, the [...]
Ram Mount Store > B Size
RAM Motorcycle Brake/Clutch Reservoir Base w/1″ Ball The RAM-B-309-1U connects to your handlebar clutch/brake clamp, left or right side, and holds one 1″ diameter mounting ball. The base fits the control clamps on your motorcycle with 40mm x 6mm stainless steel hardware, provided in the kit. To see if the RAM-B-309-1U base will mount to [...]
Ram Mount Store > B Size
RAM 1.5″ x 3″ Rectangle Base w/1″ Ball The RAM-B-202U-153 contains a 1″ diameter rubber ball connected at right angles to a 1.5″ x 3″ rectangular base. This mount has pre-drilled holes at each corner of the base plate. Material: Powder Coated Marine Grade Aluminum Ball Size: 1″ Rubber Ball “B” Size Note: The “U” [...]