White Flip Top Cap Fills for 1-1/2″ Hose – White
Features:
- White Polymer
- Integral Tank Vent with Flame Arrestor
- No Ground Wire Required
- EPA Compliant Flip Top Cap with Vacuum Pressure Relief Valve
- These fills meet the CARB and EPA requirements of U.S.C.G. Safety Standards (July 31, 2011) for 40 CFR Parts 9, 60, 80 et al. Control of Diurnal Emissions From Non-road Spark-Ignition Engines and Equipment.
Specifications:
- For Hose Size: 1-1/2″
- For Vent Hose: 5/8″
- Neck Length: 2-7/16″
- Screw Size: #10
- 35° Angled Neck
| Weight | 0.35 g |
|---|---|
| Dimensions | 5 × 5 × 3 cm |
Brand
Perko
No accessories available for this product.
No literature available for this product.
No videos available for this product.
Related products
Marine Hardware > Deck Fills
Tapered Hose Deck Fill – 1-1/2" – Waste Features: 316 S.S. Tapered Hose Waste Deck Fill with Key Larger opening allows better seal with nozzle Flange – 3-1/2" Hose – 1-1/2" Angle – 90° Chain is not included Fastener – #10 (3) Wt. – 15.5oz. Material: 316 Stainless Steel Type: 90° No Chain Waste
Marine Hardware > Deck Fills
Sea-Dog Stainless Steel Flip Top Deck Fill – Gas – 1-1/2″ Hose
Stainless Steel Flip Top Deck Fill – Gas – 1-1/2″ Hose Flip Top Hose Gas Fill is constructed of investment cast 316 stainless steel. Installs with four #10 FH fasteners (not included). USCG regulations require bonding wire to prevent sparking. WARNING: This product can expose you to chemicals which are known to the State of [...]
Marine Hardware > Deck Fills
Description: 316 S.S. 1-1/2″ Push-Up Hose Deck Fill – Waste (Black) Angle – 90 degrees Chain – No Fastener – #10 (3)Flange: 3″Hose Size: 1-1/2″
Marine Hardware > Deck Fills
Stainless Steel Flip Top Deck Fill – Gas – 2″ Hose Flip Top Hose Gas Fill is constructed of investment cast 316 stainless steel. Installs with four #10 FH fasteners (not included). USCG regulations require bonding wire to prevent sparking. WARNING: This product can expose you to chemicals which are known to the State of [...]
Marine Hardware > Deck Fills
Pipe Deck Fill 1-1/2″ Diesel Features: 316 S.S. 1-1/2″ Pipe Diesel Deck Fill with Key Chain included Flange: 3-3/8″ Fastener: #10 (3) Weight: 20oz Replacement cap & chain is P/N 6074
Marine Hardware > Deck Fills
Description: 316 S.S. 1/2″ Push-Up Hose Deck Fill – Gas (Red). Angle – 90 degreesChain – Yes Fastener – #10 (3)Flange: 3″Hose Size: 1-1/2″
Marine Hardware > Deck Fills
Sea-Dog Stainless Steel Flip Top Deck Fill Lever Rebuild Kit
Stainless Steel Flip Top Deck Fill Lever Rebuild Kit Kit Contains: 1 Lever 1 Lever Spring 2 Pivot Pins 1 Cotter Pin 1 Cap Spring 1 Gasket/Washer WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information [...]
Marine Hardware > Deck Fills
Description: 316 S.S. 1-1/2″ Push-Up Hose Deck Fill – Diesel (Green) Angle – 90 degrees Chain – Yes Fastener – #10 (3)Flange: 3″Hose Size: 1-1/2″