Octopus 30″ Hose & Fitting Kit Including Orb & NPT Helm Fittings
$210.64
26 in stock
30″ Hose & Fitting Kit Including Orb & NPT Helm Fittings
Hydraulic Hose & Fittings Kit Includes:
- (2) – 30″ Flexible High Pressure Hyd. Hose’s
- (1) – 30″ Flexible Low Pressure Hyd. Hose
- O.R.B Helm fitting kit
- NPT helm fitting kit
| Weight | 2.3 g |
|---|---|
| Dimensions | 14 × 10 × 2 cm |
Brand
Octopus Autopilot Drives
No accessories available for this product.
No literature available for this product.
No videos available for this product.
Related products
Marine Navigation & Instruments > Autopilots
Autopilot Pump, 12 VDC, 1.7 Cubic Inches Per Second (For Ram Sizes of 14 Cubic Inches to 25 Cubic Inches in Volume) The PUMPHRP17-12 is a reversing pumpset designed to interface the NavPilot series autopilot with a hydraulic steering system. The pump assembly incorporates a reversible gerotor gear pump, a two-piece gear housed in an [...]
Marine Navigation & Instruments > Autopilots
SP-80Fixed-Mount Autopilot SystemCruise Control at Sea. The SP-80 takes the helm and sets you free. For boaters who know where they’re going. SP-80 takes you where you want to be–effortlessly. It’s smart, precise piloting gives you the extra hand on deck you’ve always needed. And the operation is a snap: Simply set the course and [...]
Marine Navigation & Instruments > Autopilots
Type 2 Pump 12Volt Reversing hydraulic pump for use with steering systems equipped with 9.821 cubic inch (160-350cc) hydraulic steering rams. Compatible with 400 Series corepacks. Designed for boats with existing hydraulic steering systems.
Marine Navigation & Instruments > Autopilots
ST2000 Plus Tiller Pilot ST2000 Plus tiller autopilot for tiller steered sailing vessels to 10,000 lbs (4,500 kg) *Note: Always take the fully laden displacement weight of the vessel into account; this is often 20% above the designed displacement. Includes:Instruction ManualPlus Tiller Pilot 12V SocketTiller Pin (sold in packages of 5)Mounting Socket (sold in packages [...]
Marine Navigation & Instruments > Autopilots
TP32 Tillerpilot The TP32 is a reliable and robust autopilot, which has been optimized to draw as little power as possible and operate extremely quietly, making it ideal for sailboats up to 37 ft. Features:Easy to usePrecision steeringBattery OptimizationSilent SailingWaterproof SealingSimNet Compatible Easy To UseA simple selection of controls enable straightforward selection of the adjustments [...]
Marine Navigation & Instruments > Autopilots
Type 2 Long Linear Drive – 12V Type 2 (long) Linear drive for mechanically steered vessels up to 44,000lb (20,000kg). Designed for boats with existing mechanical steering systems. The mechanical linear drive provides powerful thrust, fast hardover times and quiet operation. Features: Low backdrive force, to minimize the drives effect on the boats steering when [...]
Marine Navigation & Instruments > Autopilots
5M Extension Cable Garmin 5M (16.40 ft) extension cable for your GHP™ 10 is the perfect accessory for mounting the CCU further than 3M (9.84 ft) from the ECU. Compatible Devices:GHP™ 10 Marine Autopilot System WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth [...]
Marine Navigation & Instruments > Autopilots
LF3000 LF3000 is a linear feedback unit for boats with outboard engine. It transforms the linearmovement to an analog signal. Supplied with 8,5 m cable and mounting clamps. The LF3000 is a waterproof feedback unit. It has a 300 mm (11,8″) stroke and comes with a special mounting bracket which secures the LF3000 to the [...]