2-3-70 Battery Isolator
This heavy-duty isolator allows charging multiple batteries automatically from one or two alternators and prevents the discharge or ‘dumping” of one battery into another. Each battery is charged according to its need without overcharging and is rated for 12-, 24-, or 36-volt negative ground DC systems.
Features:
- Conservatively rated diodes and a rustproof anodized aluminum heat sink case.
- Heavy-duty construction
- Rated for systems up to 48 volts DC, negative ground
- Rust-proof anodized aluminum case
- Stainless steel mounting hardware is provided
- Protective covers are provided for terminals
Specifications:
- Alternator Sources: 2
- Battery Bank: 3
- Max. Amperage Input Capacity: 70
- Stud Terminal Size: 6mm
- Dimensions (L x W x H): 6.5 x 4.5 x 3.1 inches
- Weight: 4 lbs.
- Operating Temperature: -40 to +80 degrees
- Duty Cycle: Continuous rating to 50 degrees C Derate linearly to 70% @ 80 degrees C.
- Temp. Rise: 5 degrees C at full rated current (mount vertically for optimum cooling)
- Voltage Drop: 0.7V @ 50% load, 0.9V @ full load
*Note: These battery isolators are not compatible with self-exciting alternators. The alternator must have an external excitation lead. Please consult the manufacturer of your alternator if you are unsure of your configuration
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
| Weight | 13.8 g |
|---|---|
| Dimensions | 10 × 9 × 4 cm |
Brand
Newmar Power
No accessories available for this product.
No videos available for this product.
Related products
Electrical > Battery Isolators
160A Automatic Charge Isolator – 12V or 24V The ACR-160 combines battery banks for charging and isolates them when charging has stopped. It provides priority for charging only the starter battery first and protects from excessive discharging of the starter battery. The Automatic Charge Isolator is also referred to as a battery separator, battery isolator [...]
Electrical > Battery Isolators
ProMariner ProIsoCharge Battery Isolator 130Amp 2-Alt 4-Bat – 12V
ProIsoCharge Series Model ProIsoCharge130 2•4 Part No. 23127 System Volts DC 12Max DC Amps 130 AmpAlternator Input2Battery Outputs 4Size12.05″(l) x 5.875″(w) x 3.125″(h) Weight7 lbs Significantly Smarter…ProIsoCharge delivers digitally controlled alternator output distribution while protecting the health of engine start batteries. An industry changing design that provides intelligent and zero voltage loss isolation, charging of [...]
Electrical > Battery Isolators
ProSafe FAILSAFE 30amp Galvanic Isolator ProSafe FS installs easily and does not require a dedicated monitor to verify the operational status of the galvanic isolator as required by non FailSafe Certified galvanic isolators. ProSafe FS 30 is built on robust FlatPack semiconductor platforms ensuring that in the event of a failure, the failure is safe [...]
Electrical > Battery Isolators
Smart Dual Battery Isolator This Smart Dual Battery Isolator is ideal for dual battery applications. Allows two batteries to automatically charge at the same time and then isolates the batteries, ensuring the starting battery is always charged and ready for use. Automatically engages or disengages the circuit at pre-set voltages by sensing the input voltage [...]
Electrical > Battery Isolators
ProMariner Battery Isolator – 130 AMP – 1 Alternator – 2 Battery
Battery Isolator – 1 Alternator – 2 Battery – 130 AMP ProMariner Battery Isolators with gold-plated terminals and improved efficiency, provide enhanced charging. Rated for use with DC devices ranging from 10 amps to 130 amps.
Electrical > Battery Isolators
ProMariner ProIsoCharge Battery Isolator 180Amp 1-Alt 2-Bat – 12V
ProIsoCharge Series Model ProIsoCharge180 1•2 Part No. 23122 System Volts DC 12Max DC Amps 180 AmpAlternator Input1Battery Outputs 2Size 6.15″(l) x 5.875″(w) x 3.125″(h)Weight3 lbs Significantly Smarter…ProIsoCharge delivers digitally controlled alternator output distribution while protecting the health of engine start batteries. An industry changing design that provides intelligent and zero voltage loss isolation, charging of [...]
Electrical > Battery Isolators
Argo FET Battery Isolator – 100AMP – 2 Batteries Similarly to diode battery isolators, FET isolators allow simultaneous charging of two or more batteries from one alternator (or a single output battery charger), without connecting the batteries together. In contrast with diode battery isolators, FET isolators have virtually no voltage loss. Voltage drop is less [...]
Electrical > Battery Isolators
Victron Galvanic Isolator VDI-16A, 16 AMP Max Waterproof Potted
Galvanic Isolator VDI-16A, 16 AMP Max Waterproof Potted The galvanic isolator prevents electrolytic corrosion. It blocks low-voltage DC currents that enter your boat via the shore power earth wire. These currents can cause corrosion to the boat’s underwater metals, like the hull, propeller, shaft, and so on. The galvanic isolator consists internally of two diodes [...]