2-3-120 Battery Isolator
This heavy-duty isolator allows charging multiple batteries automatically from one or two alternators and prevents the discharge or ‘dumping” of one battery into another. Each battery is charged according to its need without overcharging and is rated for 12-, 24-, or 36-volt negative ground DC systems.
Features:
- Conservatively rated diodes and a rustproof anodized aluminum heat sink case.
- Heavy-duty construction
- Rated for systems up to 48 volts DC, negative ground
- Rust-proof anodized aluminum case
- Stainless steel mounting hardware is provided
- Protective covers are provided for terminals
Specifications:
- Alternator Sources: 2
- Battery Bank: 3
- Max. Amperage Input Capacity: 120
- Stud Terminal Size: 6mm
- Dimensions (L x W x H): 12.5 x 4.5 x 3.1 inches
- Weight: 5 lbs.
- Operating Temperature: -40 to +80 degrees
- Duty Cycle: Continuous rating to 50 degrees C Derate linearly to 70% @ 80 degrees C.
- Temp. Rise: 5 degrees C at full rated current (mount vertically for optimum cooling)
- Voltage Drop: 0.7V @ 50% load, 0.9V @ full load
*Note: These battery isolators are not compatible with self-exciting alternators. The alternator must have an external excitation lead. Please consult the manufacturer of your alternator if you are unsure of your configuration
| Weight | 5.25 g |
|---|---|
| Dimensions | 13 × 5 × 4 cm |
Brand
Newmar Power
No accessories available for this product.
No videos available for this product.
Related products
Electrical > Battery Isolators
ProMariner ProIsoCharge Battery Isolator 120Amp 1-Alt 3-Bat – 12V
ProIsoCharge Series Model ProIsoCharge120 1•3 Part No. 23124 System Volts DC 12Max DC Amps 120 AmpAlternator Input1Battery Outputs 3Size 6.15″(l) x 5.875″(w) x 3.125″(h)Weight3 lbs Significantly Smarter…ProIsoCharge delivers digitally controlled alternator output distribution while protecting the health of engine start batteries. An industry changing design that provides intelligent and zero voltage loss isolation, charging of [...]
Electrical > Battery Isolators
ProMariner ProIsoCharge Battery Isolator 130Amp 2-Alt 4-Bat – 12V
ProIsoCharge Series Model ProIsoCharge130 2•4 Part No. 23127 System Volts DC 12Max DC Amps 130 AmpAlternator Input2Battery Outputs 4Size12.05″(l) x 5.875″(w) x 3.125″(h) Weight7 lbs Significantly Smarter…ProIsoCharge delivers digitally controlled alternator output distribution while protecting the health of engine start batteries. An industry changing design that provides intelligent and zero voltage loss isolation, charging of [...]
Electrical > Battery Isolators
Argo Diode Battery Isolator – 160AMP – 2 Batteries Diode battery isolators allow simultaneous charging of two or more batteries from one alternator, without connecting the batteries together. Discharging the accessory battery for example will not result in also discharging the starter battery. The Argo Battery Isolators feature a low voltage drop thanks to the [...]
Electrical > Battery Isolators
ProMariner Battery Isolator – 2 Alternator – 3 Battery – 70 AMP
Battery Isolator – 2 Alternator – 3 Battery – 70 AMP ProMariner Battery Isolators with gold-plated terminals and improved efficiency, provide enhanced charging. Rated for use with DC devices ranging from 10 amps to 70 amps.
Electrical > Battery Isolators
Battery Mate 1602 IG Isolator – 120 Amp, 2 Bank The Battery Mate is the ultimate solution for charging several batteries simultaneously and is compatible with any type of alternator/battery charger, in both existing and new systems. As the voltage loss between the alternator and battery is negligible, the Battery Mate performs far better than [...]
Electrical > Battery Isolators
Single Bank Battery Isolator, 200A, 40V Analytic Systems introduces the IBI (Ideal Battery Isolator) for 1, 2 and 3 bank battery systems, allowing all the batteries to be fully charged from a single alternator while maintaining electricalisolation between the battery banks or between a vehicle and trailer. Ideal Diode technology uses MosFet Transistors and control circuitry to [...]
Electrical > Battery Isolators
Victron Galvanic Isolator VDI-16A, 16 AMP Max Waterproof Potted
Galvanic Isolator VDI-16A, 16 AMP Max Waterproof Potted The galvanic isolator prevents electrolytic corrosion. It blocks low-voltage DC currents that enter your boat via the shore power earth wire. These currents can cause corrosion to the boat’s underwater metals, like the hull, propeller, shaft, and so on. The galvanic isolator consists internally of two diodes [...]
Electrical > Battery Isolators
ProSafe FAILSAFE 60amp Galvanic Isolator ProSafe FS installs easily and does not require a dedicated monitor to verify the operational status of the galvanic isolator as required by non FailSafe Certified galvanic isolators. ProSafe FS 60 is built on robust FlatPack semiconductor platforms ensuring that in the event of a failure, the failure is safe [...]