1-3-165 Battery Isolator
This heavy-duty isolator allows charging multiple batteries automatically from one or two alternators and prevents the discharge or ‘dumping” of one battery into another. Each battery is charged according to its need without overcharging and is rated for 12-, 24-, or 36-volt negative ground DC systems.
Features:
- Conservatively rated diodes and a rustproof anodized aluminum heat sink case.
- Heavy-duty construction
- Rated for systems up to 48 volts DC, negative ground
- Rust-proof anodized aluminum case
- Stainless steel mounting hardware is provided
- Protective covers are provided for terminals
Specifications:
- Alternator Sources: 1
- Battery Bank: 3
- Max. Amperage Input Capacity: 165
- Stud Terminal Size: 6mm
- Dimensions (L x W x H): 9 x 4.5 x 3.1 inches
- Weight: 5 lbs.
- Operating Temperature: -40 to +80 degrees
- Duty Cycle: Continuous rating to 50 degrees C Derate linearly to 70% @ 80 degrees C.
- Temp. Rise: 5 degrees C at full rated current (mount vertically for optimum cooling)
- Voltage Drop: 0.7V @ 50% load, 0.9V @ full load
*Note: These battery isolators are not compatible with self-exciting alternators. The alternator must have an external excitation lead. Please consult the manufacturer of your alternator if you are unsure of your configuration
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
Brand
Newmar Power
No accessories available for this product.
No videos available for this product.
Related products
Electrical > Battery Isolators
Victron Galvanic Isolator VDI-16A, 16 AMP Max Waterproof Potted
Galvanic Isolator VDI-16A, 16 AMP Max Waterproof Potted The galvanic isolator prevents electrolytic corrosion. It blocks low-voltage DC currents that enter your boat via the shore power earth wire. These currents can cause corrosion to the boat’s underwater metals, like the hull, propeller, shaft, and so on. The galvanic isolator consists internally of two diodes [...]
Electrical > Battery Isolators
160A Automatic Charge Isolator – 12V or 24V The ACR-160 combines battery banks for charging and isolates them when charging has stopped. It provides priority for charging only the starter battery first and protects from excessive discharging of the starter battery. The Automatic Charge Isolator is also referred to as a battery separator, battery isolator [...]
Electrical > Battery Isolators
Argo Diode Battery Isolator – 160AMP – 2 Batteries Diode battery isolators allow simultaneous charging of two or more batteries from one alternator, without connecting the batteries together. Discharging the accessory battery for example will not result in also discharging the starter battery. The Argo Battery Isolators feature a low voltage drop thanks to the [...]
Electrical > Battery Isolators
Argofet Battery Isolator 100-3 3 Batteries – 100AMP Similarly to Argodiode battery isolators, Argofet isolators allow simultaneous charging of two or more batteries from one alternator (or a single output battery charger), without connecting the batteries together. In contrast with Argodiode battery isolators, Argofet isolators have virtually no voltage loss. Voltage drop is less than [...]
Electrical > Battery Isolators
Battery Mate 2503 IG Isolator – 200 Amp, 3 Bank The Battery Mate is the ultimate solution for charging several batteries simultaneously and is compatible with any type of alternator/battery charger, in both existing and new systems. As the voltage loss between the alternator and battery is negligible, the Battery Mate performs far better than [...]
Electrical > Battery Isolators
Argo FET Battery Isolator – 100AMP – 2 Batteries Similarly to diode battery isolators, FET isolators allow simultaneous charging of two or more batteries from one alternator (or a single output battery charger), without connecting the batteries together. In contrast with diode battery isolators, FET isolators have virtually no voltage loss. Voltage drop is less [...]
Electrical > Battery Isolators
BI 1203-S Isolator Onboard systems usually consist of two or more batteries that function independently when powering the 12 or 24V consumers. These batteries require independent charging with reliable battery isolators or battery combiners. Mastervolt offers several intelligent solutions: Battery isolators that divide your charge current with a minimum energy loss. The Charge Mate for [...]
Electrical > Battery Isolators
ProMariner ProIsoCharge Battery Isolator 120Amp 1-Alt 3-Bat – 12V
ProIsoCharge Series Model ProIsoCharge120 1•3 Part No. 23124 System Volts DC 12Max DC Amps 120 AmpAlternator Input1Battery Outputs 3Size 6.15″(l) x 5.875″(w) x 3.125″(h)Weight3 lbs Significantly Smarter…ProIsoCharge delivers digitally controlled alternator output distribution while protecting the health of engine start batteries. An industry changing design that provides intelligent and zero voltage loss isolation, charging of [...]