1-2-120 Battery Isolator
This heavy-duty isolator allows multiple batteries to charge automatically from one or two alternators and prevents the discharge or ‘dumping” of one battery into another. Each battery is charged according to its need without overcharging and is rated for 12-, 24-, or 36-volt, negative ground DC systems. This model is a 120-amp alternator.
Features:
- Conservatively rated diodes and a rustproof anodized aluminum heat sink case
- Heavy duty construction
- Rated for systems up to 48 volts DC, negative ground
- Rust-proof anodized aluminum case
- Stainless steel mounting hardware provided
- Protective covers provided for terminals
Specifications:
- Operating Temperature: -40 to +80°
- Duty Cycle: Continuous rating to 50° C Derate linearly to 70% @ 80° C
- Temp. Rise: 5° C at full rated current (mount vertically for optimum cooling)
- Voltage Drop: 0.7V @ 50% load, 0.9V @ full load
- Alternator Sources: 1
- Battery Bank: 2
- Max. Amperage Input Capacity: 120
- Stud Terminal Size: 6mm
- Dimensions (L x W x H): 6.5″ x 4.5″ x 3.1″
- Weight: 3 lbs.
Note: These battery isolators are not compatible with self-exciting alternators. The alternator must have an external excitation lead. Please consult the manufacturer of your alternator if you are unsure of your configuration
| Weight | 2.6 g |
|---|---|
| Dimensions | 10 × 9 × 4 cm |
Brand
Newmar Power
No accessories available for this product.
Literature
Installation Guide: Download PDF
No videos available for this product.
Related products
Electrical > Battery Isolators
Victron ArgoFET 200-2 Battery Isolator – 200AMP – 1 Alternator, 2 Batteries
Argo FET Battery Isolator – 200AMP – 2 Batteries Similarly to diode battery isolators, FET isolators allow simultaneous charging of two or more batteries from one alternator (or a single output battery charger), without connecting the batteries together. In contrast with diode battery isolators, FET isolators have virtually no voltage loss. Voltage drop is less [...]
Electrical > Battery Isolators
Single Bank Battery Isolator, 200A, 40V Analytic Systems introduces the IBI (Ideal Battery Isolator) for 1, 2 and 3 bank battery systems, allowing all the batteries to be fully charged from a single alternator while maintaining electricalisolation between the battery banks or between a vehicle and trailer. Ideal Diode technology uses MosFet Transistors and control circuitry to [...]
Electrical > Battery Isolators
BI 1203-S Isolator Onboard systems usually consist of two or more batteries that function independently when powering the 12 or 24V consumers. These batteries require independent charging with reliable battery isolators or battery combiners. Mastervolt offers several intelligent solutions: Battery isolators that divide your charge current with a minimum energy loss. The Charge Mate for [...]
Electrical > Battery Isolators
ProMariner Battery Isolator – 2 Alternator – 2 Battery – 70 AMP
Battery Isolator – 2 Alternator – 2 Battery – 70 AMP ProMariner Battery Isolators with gold-plated terminals and improved efficiency, provide enhanced charging. Rated for use with DC devices ranging from 10 amps to 70 amps.
Electrical > Battery Isolators
ProMariner Battery Isolator – 2 Alternator – 3 Battery – 70 AMP
Battery Isolator – 2 Alternator – 3 Battery – 70 AMP ProMariner Battery Isolators with gold-plated terminals and improved efficiency, provide enhanced charging. Rated for use with DC devices ranging from 10 amps to 70 amps.
Electrical > Battery Isolators
Victron Argo FET Battery Isolator 200-3 3 Batteries – 200AMP
Argo FET Battery Isolator 200-3 3 Batteries – 200AMP Similarly to diode battery isolators, FET isolators allow simultaneous charging of two or more batteries from one alternator (or a single output battery charger), without connecting the batteries together. In contrast with diode battery isolators, FET isolators have virtually no voltage loss. Voltage drop is less [...]
Electrical > Battery Isolators
Battery Mate 1603 IG Isolator – 120 Amp, 3 Bank The Battery Mate is the ultimate solution for charging several batteries simultaneously and is compatible with any type of alternator/battery charger, in both existing and new systems. As the voltage loss between the alternator and battery is negligible, the Battery Mate performs far better than [...]
Electrical > Battery Isolators
ProSafe FAILSAFE 60amp Galvanic Isolator ProSafe FS installs easily and does not require a dedicated monitor to verify the operational status of the galvanic isolator as required by non FailSafe Certified galvanic isolators. ProSafe FS 60 is built on robust FlatPack semiconductor platforms ensuring that in the event of a failure, the failure is safe [...]