Load Rite Rotor Complete Kit Vented 9.75″ Integral, No Grease 5 Stud Dacromet Finish Knott
Rotor Complete Kit Vented 9.75" Integral, No Grease 5 Stud Dacromet Finish Knott
Complete 9.75″ Disc Brake Rotor Assembly Manufactured by Autoflex Knott.
Replacement Disc Brake Rotor Assembly: Fits 5 on 4.5″ Bolt Pattern. Inorganic, Dacromet®, VOC Compliant, Water-Based, Coating Provides “4-Way Corrosion Protection” Against Weathering/Harsh Conditions.
Features:
- Compliant to 1.06″ × 1.38″ Tapered Spindles
- 3,500 lbs Capacity, Disc Braking Axles
- Weight: 25 lbs
Kit Includes:
- Full, 1,750 lbs. Capacity, Disc Braking Rotor with Dacromet® Finish
- Bearings, Pre-Installed Races, and Rear Grease Seal
- Autoflex Knottâ’¸ Brand Dust Cap and Grommet
- 12 Position Castle Nut, Spindle Washer, and Cotter Pin
Brand
Load Rite
No accessories available for this product.
No literature available for this product.
No videos available for this product.
Related products
Trailering > Bearings/Hubs/Brakes
Grease Seals f/1″ to 1-1/16″ Straight Spindle Product DescriptionNeed to reseal trailer wheels? No need to purchase an entire wheel bearing set when all you need are the seals. Smith “double-lip seals with gripper springs” are the best available and provide a tight long lasting seal. Features:Seal number: 12192TBFor 1″ or 1-1/16″ straight spindlesSeal land [...]
Brake Pads 10 & 12" Disc Full Axle 2 Sets Inner & Outer Features: Optimal at Transferring Heat Generated From Braking Use with EITHER 10″ or 12″ Disc Brake Rotor Assemblies Sold as FULL SET, BOTH Inner and Outer Assemblies, for ONE (1) Complete Axle Weight: 2.2 lbs
Trailering > Bearings/Hubs/Brakes
Load Rite 8,500lb Disc Brake Actuator – Tie Down Engineering Model
8,500lb Disc Brake Actuator – Tie Down Engineering Model The Model 850E works by the “surge” or “push” of the trailer toward the tow vehicle. This automatically synchronizes the trailer brakes with the tow vehicle axle brakes. When the trailer pushes against the tow vehicle, the actuator telescopes together and applies the force to the [...]
Uncategorized
FLX-12 Genz Pack with 12° Ice Ducer The Genz pack carry case, when rigged with a FLX-12 flasher and tricked out with the DD-100 to give you digital depth readouts, will get you ready for the ice. The classic Blue Genz pack case was designed by Mr. Ice fishing himself, Dave Genz. Genz loves this [...]
Trailering > Bearings/Hubs/Brakes
12″ AutoFlex Knott Disc Brake Kit Load Rite’s 6-lug, 12-inch vented rotor disc brake kit is manufactured by AutoFlex KNOTT and fits UFP 6,000 lbs. capacity 6-bolt axles. Does not fit Tie Down. Kit Includes: Vented cupped and studded, zinc rotor, and hub assembly Loaded caliper assembly with pads Full inner and outer bearings, races, [...]
Uncategorized
Autopilot Isolation Hose Kit Add electrical ground isolation with this Garmin hose kit. Isolation hoses are installed between our 1.2 L (0.32 gal) and 2 L (0.53 gal) autopilot pumps and the boat’s steel-braided Mercury Verado steering hose. Compatible Devices: GHP Reactor™ Hydraulic Autopilot Kit Includes: Two 12-inch (30.48 cm) high-pressure reinforced No. 4 diameter [...]
Trailering > Bearings/Hubs/Brakes
Trailer Hub Kit Hub Kits come complete and ready to install on your axel. Simply remove your old hub and replace with this pre assembled and pre greased hub. Comes with dust cap, cotter pin and wheel nuts. Spindle: 1-3/8″ – 1-1/16″ Bolt Cir: 5 x 4.5 Cap: 1750 Flange O.D.: 6-1/2″ Max Wheel: 15″ [...]
Trailering > Bearings/Hubs/Brakes
10″ Knott Disc Brake Kit Load Rite’s 5-lug, 10-inch vented integral rotor disc brake kit is manufactured by AutoFlex KNOTT and fits KNOTT 3,700 lbs. capacity 5-bolt axles. Kit Includes: Vented cupped and studded, zinc rotor, and hub assembly Loaded caliper assembly with pads Full inner and outer bearings, races, and corresponding seal Dust cap, [...]