7.7K Disc Brake Actuator
Specifications:
- Disc Braking
- Surge Actuator
- Tie Down Engineering
- Capacity: 7,700 lbs
- For use with Disc Brakes
This is a demo store for testing purposes — no orders shall be fulfilled. Dismiss
Skip to contentSignup for our newsletter to get notified about sales and new products. Add any text here or remove it.
7.7K Disc Brake Actuator
Specifications:
No accessories available for this product.
No literature available for this product.
No videos available for this product.
Trailering > Bearings/Hubs/Brakes
Grease Seals f/1″ to 1-1/16″ Straight Spindle Product DescriptionNeed to reseal trailer wheels? No need to purchase an entire wheel bearing set when all you need are the seals. Smith “double-lip seals with gripper springs” are the best available and provide a tight long lasting seal. Features:Seal number: 12192TBFor 1″ or 1-1/16″ straight spindlesSeal land [...]
Uncategorized
IC Retail Kit 24V Gulper IC Pump & Strainer IC At the heart of every Whale IC product lies innovative electronic control circuitry.This enables IC sensor accessories to communicate directly with IC pumps to control their performance. Features & Benefits: Save time and money by reducing four separate components to one pre-wired system. Remote mounting [...]
Trailering > Bearings/Hubs/Brakes
Load Rite 20,000lb Capacity Disc Brake Actuator w/2-5/16″ Coupler
20,000lb Capacity Disc Brake Actuator with 2-5/16″ Coupler The Model works by the “surge” or “push” of the trailer toward the tow vehicle. This automatically synchronizes the trailer brakes with the brakes on the tow vehicle. When the trailer pushes against the tow vehicle, the actuator telescopes together and applies the force to the master [...]
Trailering > Bearings/Hubs/Brakes
10″ Knott Disc Brake Kit Load Rite’s 5-lug, 10-inch vented integral rotor disc brake kit is manufactured by AutoFlex KNOTT and fits KNOTT 3,700 lbs. capacity 5-bolt axles. Kit Includes: Vented cupped and studded, zinc rotor, and hub assembly Loaded caliper assembly with pads Full inner and outer bearings, races, and corresponding seal Dust cap, [...]
Uncategorized
Actuator 8.5K – 2" Ball Specifications: 8,500 lbs Capacity Fits 2″ Hitch Ball For Use with Disc Brakes
Uncategorized
Load Rite Rotor Complete Kit Vented 9.75″ Integral, No Grease 5 Stud Dacromet Finish Knott
Rotor Complete Kit Vented 9.75" Integral, No Grease 5 Stud Dacromet Finish Knott Complete 9.75″ Disc Brake Rotor Assembly Manufactured by Autoflex Knott. Replacement Disc Brake Rotor Assembly: Fits 5 on 4.5″ Bolt Pattern. Inorganic, Dacromet®, VOC Compliant, Water-Based, Coating Provides “4-Way Corrosion Protection” Against Weathering/Harsh Conditions. Features: Compliant to 1.06″ × 1.38″ Tapered Spindles [...]
Trailering > Bearings/Hubs/Brakes
9.6″ Dexter Vented Rotor Disc Brake Kit Load Rite’s 5-lug, 9.6-inch vented rotor disc brake kit is manufactured by Dexter and fits a standard 3,750 lbs capacity spindle. Kit Includes: Vented rotor with Galvx finish Aluminum caliper with e-coat finish Ceramic pads with backing plates Galvanized heavy-duty mounting bracket Dust cap, slider pins, and hardware [...]
Brake Pads 10 & 12" Disc Full Axle 2 Sets Inner & Outer Features: Optimal at Transferring Heat Generated From Braking Use with EITHER 10″ or 12″ Disc Brake Rotor Assemblies Sold as FULL SET, BOTH Inner and Outer Assemblies, for ONE (1) Complete Axle Weight: 2.2 lbs