20,000lb Capacity Disc Brake Actuator with 2-5/16″ Coupler
The Model works by the “surge” or “push” of the trailer toward the tow vehicle. This automatically synchronizes the trailer brakes with the brakes on the tow vehicle. When the trailer pushes against the tow vehicle, the actuator telescopes together and applies the force to the master cylinder, supplying hydraulic pressure to the brakes. The built-in, sealed, independent dampening shock absorber controls the telescoping shock against the hitch.
Be sure to comply with the regulations for brakes in the state. Brake laws are sometimes minimum standards, and users may wish to add brakes to a trailer to meet minimum Gross Vehicle Weight Ratings (G.V.W.R.). Note: G.V.W.R. is the Gross Vehicle Weight Rating, which includes the trailer and the load weight as a total gross weight.
Read the tow vehicle owner’s manual on towing capacity and other towing recommendations before installing brakes or this actuator.
Features:
- 20,000 lbs. capacity
- Fits 2-5/16″ in. hitch ball
- For use with disc brakes
Maximum Actuator Capacity:
- Gross Load: 16,500 lbs.
The actual in-service rating is limited to that of the ball and hitch or the least-rated component on the tow vehicle or trailer being used, or the trailer manufacturer’s G.V.W.R. shown on the certification label, whichever is lower (note: G.V.W.R. is the Gross Vehicle Weight Rating, which includes the trailer and the load weight as total gross weight.
| Weight | 70 g |
|---|---|
| Dimensions | 37 × 13 × 9 cm |
Brand
Load Rite
No accessories available for this product.
No literature available for this product.
No videos available for this product.
Related products
Trailering > Bearings/Hubs/Brakes
Hub Kits come complete and ready to install on your axle. Simply remove your old hub and replace with this pre assembled and pre greased hub. Comes with dust cap, cotter pin and wheel nuts. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp),LEAD which are known to the State of California to [...]
Trailering > Bearings/Hubs/Brakes
10″ Knott Disc Brake Kit Load Rite’s 5-lug, 10-inch vented integral rotor disc brake kit is manufactured by AutoFlex KNOTT and fits KNOTT 3,700 lbs. capacity 5-bolt axles. Kit Includes: Vented cupped and studded, zinc rotor, and hub assembly Loaded caliper assembly with pads Full inner and outer bearings, races, and corresponding seal Dust cap, [...]
Trailering > Bearings/Hubs/Brakes
Load Rite 8,500lb Disc Brake Actuator – Tie Down Engineering Model
8,500lb Disc Brake Actuator – Tie Down Engineering Model The Model 850E works by the “surge” or “push” of the trailer toward the tow vehicle. This automatically synchronizes the trailer brakes with the tow vehicle axle brakes. When the trailer pushes against the tow vehicle, the actuator telescopes together and applies the force to the [...]
Trailering > Bearings/Hubs/Brakes
HubMate Wheel Bearing Protectors HubMate™ bearing protectors replace the dust caps in the wheel hub. The accessible grease fitting allows you to add grease without disassembling it. Positive grease pressure keeps water and dirt out. Features: Outer hub inner diameter: 1.78 inches Automatically lubricates, reducing wear and prolonging bearing life Covers are custom-fitted PVC
Trailering > Bearings/Hubs/Brakes
12″ Dexter Vented Rotor Disc Brake Kit Load Rite’s 6-lug, 12-inch vented rotor disc brake kit is manufactured by Dexter and fits a standard 3,000-capacity spindle. Kit Includes: Vented rotor with Galvx finish Aluminum caliper with e-coat finish Ceramic pads with backing plates Galvanized heavy-duty mounting bracket Dust cap, slider pins, and hardware Pre-greased rotors [...]
Trailering > Bearings/Hubs/Brakes
Grease Seals f/1″ to 1-1/16″ Straight Spindle Product DescriptionNeed to reseal trailer wheels? No need to purchase an entire wheel bearing set when all you need are the seals. Smith “double-lip seals with gripper springs” are the best available and provide a tight long lasting seal. Features:Seal number: 12192TBFor 1″ or 1-1/16″ straight spindlesSeal land [...]
Trailering > Bearings/Hubs/Brakes
Load Rite 7,500lb Disc Brake Actuator – Tie Down Engineering Model
7,500lb Disc Brake Actuator – Tie Down Engineering Model The Model 750E works by the “surge” or “push” of the trailer toward the tow vehicle. This automatically synchronizes the trailer brakes with the tow vehicle axle brakes. When the trailer pushes against the tow vehicle, the actuator telescopes together and applies the force to the [...]
Trailering > Bearings/Hubs/Brakes
C.E. Smith Trailer Hub Kit – 1-3/8″ x 1-1/16″ Tapered – 5 x 4-1/2″ Galvanized
Trailer Hub Kit – 1-3/8″ x 1-1/16″ Tapered – 5 x 4-1/2″ Galvanized Features:1-3/8″ x 1-1/16″ Tapered5 x 4-1/2″ Galvanized WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp),LEAD which are known to the State of California to cause cancer, birth defects or other reproductive harm, and CADMIUM which is known to the [...]