12″ AutoFlex Knott Disc Brake Kit
Load Rite’s 6-lug, 12-inch vented rotor disc brake kit is manufactured by AutoFlex KNOTT and fits UFP 6,000 lbs. capacity 6-bolt axles. Does not fit Tie Down.
Kit Includes:
- Vented cupped and studded, zinc rotor, and hub assembly
- Loaded caliper assembly with pads
- Full inner and outer bearings, races, and corresponding seal
- Dust cap, lug nuts, and mounting hardware
*LH/RH Compatible
*Quantity (2) Kits Required Per Axle Assembly
| Weight | 39.5 g |
|---|---|
| Dimensions | 12 × 12 × 12 cm |
Brand
Load Rite
No accessories available for this product.
No literature available for this product.
No videos available for this product.
Related products
7,500lb Disc Brake Actuator – Tie Down Engineering Model The Model 750E works by the “surge” or “push” of the trailer toward the tow vehicle. This automatically synchronizes the trailer brakes with the tow vehicle axle brakes. When the trailer pushes against the tow vehicle, the actuator telescopes together and applies the force to the [...]
Trailering > Bearings/Hubs/Brakes
Load Rite 8,500lb Disc Brake Actuator – Tie Down Engineering Model
8,500lb Disc Brake Actuator – Tie Down Engineering Model The Model 850E works by the “surge” or “push” of the trailer toward the tow vehicle. This automatically synchronizes the trailer brakes with the tow vehicle axle brakes. When the trailer pushes against the tow vehicle, the actuator telescopes together and applies the force to the [...]
Trailering > Bearings/Hubs/Brakes
Load Rite 6,600lb Disc Brake Actuator – Tie Down Engineering Model
6,600lb Disc Brake Actuator – Tie Down Engineering Model The Model 660E works by the “surge” or “push” of the trailer toward the tow vehicle. This automatically synchronizes the trailer brakes with the tow vehicle axle brakes. When the trailer pushes against the tow vehicle, the actuator telescopes together and applies the force to the [...]
Trailering > Bearings/Hubs/Brakes
CE Smith Dust Caps – Hub ID 1.980″ – (Pair) Product DescriptionUse this dust cap to protect your axle nut. Features:Fits hub with inner diamerter of 1.98″Sold in pairs WARNING: This product can expose you to chemicals including ARSENIC ,CADMIUM which are known to the State of California to cause cancer or other reproductive harm, [...]
Uncategorized
Load Rite Rotor Complete Kit Vented 9.75″ Integral, No Grease 5 Stud Dacromet Finish Knott
Rotor Complete Kit Vented 9.75" Integral, No Grease 5 Stud Dacromet Finish Knott Complete 9.75″ Disc Brake Rotor Assembly Manufactured by Autoflex Knott. Replacement Disc Brake Rotor Assembly: Fits 5 on 4.5″ Bolt Pattern. Inorganic, Dacromet®, VOC Compliant, Water-Based, Coating Provides “4-Way Corrosion Protection” Against Weathering/Harsh Conditions. Features: Compliant to 1.06″ × 1.38″ Tapered Spindles [...]
Trailering > Bearings/Hubs/Brakes
Trailer Hub Kit Hub Kits come complete and ready to install on your axel. Simply remove your old hub and replace with this pre assembled and pre greased hub. Comes with dust cap, cotter pin and wheel nuts. Spindle: 1-3/8″ – 1-1/16″ Bolt Cir: 5 x 4.5 Cap: 1750 Flange O.D.: 6-1/2″ Max Wheel: 15″ [...]
Trailering > Bearings/Hubs/Brakes
Load Rite 20,000lb Capacity Disc Brake Actuator w/2-5/16″ Coupler
20,000lb Capacity Disc Brake Actuator with 2-5/16″ Coupler The Model works by the “surge” or “push” of the trailer toward the tow vehicle. This automatically synchronizes the trailer brakes with the brakes on the tow vehicle. When the trailer pushes against the tow vehicle, the actuator telescopes together and applies the force to the master [...]
Trailering > Bearings/Hubs/Brakes
2.32″ Bearing Protectors & Covers – 2 Pack Keeping the wheels of a trailer well lubricated is an important part of towing responsibly. It may not be on the forefront of most users’ minds, but a trailer’s wheels need to be cared for just like the wheels of a vehicle. CURT offers an easy way [...]