-
×
Shakespeare Galaxy 5225-XT 8' VHF Antenna - 6dB Gain - Reduced Length
1 × $219.99 -
×
Raritan Crown Head™ Deep Draft Repair Kit
1 × $190.00 -
×
Raritan Shaft Seal f/PH & PHII
1 × $12.50 -
×
Raymarine Lexan Depth Transducer f/ST60 & ST290
1 × $124.99 -
×
Maretron Micro Inline Termination Resistor
1 × $21.00 -
×
Ancor 16-14 Heatshrink Butt Connectors - 100-Pack
1 × $51.09 -
×
Ancor Heavy Duty Lugs - 8 Gauge Wire - 5/16" Post - 100-Pack
1 × $79.02
Cone and Washer Kit v/CPX and V Series Windlasses
Replacement cones and washers for CPX and V series windlasses.
Compatible With:
- CPX and V Series windlasses
In the Box:
- Cones x two (2)
- Washers x two (2)
- Instruction manual
*Sold as an Indivudual
| Weight | 1.35 g |
|---|---|
| Dimensions | 3 × 3 × 1 cm |
Brand
Lewmar
No accessories available for this product.
No literature available for this product.
No videos available for this product.
Related products
Out of stock
Anchoring & Docking > Windlasses
$2,678.00
RC8 12V Windlass – 100W 5/16″ Chain to 5/8″ Rope Features: The stainless steel RC8-6 fully automatic rope/chain windlass is designed to effortlessly retrieve and deploy 6mm/7mm (1/4″) chain spliced to 12mm (1/2″) three strand or 8-brait (plait) rope. The larger stainless steel RC88 can be used with 8mm (5/16″) chain spliced to 14mm (9/16″) [...]
Out of stock
Anchoring & Docking > Windlasses
Maxwell RC 12-12 Vertical Windlass 1/2″ Chain, 3/4″ Rope, 12V
$5,585.00
RC 12-12 Vertical Windlass 1/2″ Chain, 3/4″ Rope, 12V Package Includes Windlass On/Off Breaker Panel Reversing Solenoid Up/Down Panel Switch Handle The RC12 Series incorporates Maxwell’s latest stylish innovation in automatic rope/chain technology. Retaining the classic open design styling more appropriate on larger boats, the RC12 Series represents the next generation of rope/chain windlass evolution [...]
Out of stock
Anchoring & Docking > Windlasses
Maxwell RC10/10 12V Automatic Rope Chain Windlass 3/8″ Chain to 5/8″ Rope
$3,367.00
RC10 Automatic Rope/Chain Windlass Designed for 3/8″ chain and 5/8″ rope combination Maximum Pull: 1870lbs. Metric chain size: 10mm Motor Wattage: 1200W Innovative heavy duty stainless steel pressure arm, coupled with a unique rope/chain gypsy, giving an unparalleled level of performance. Simple two piece installation, saving time and money and allowing easy retrofitting without disassembly [...]
Anchoring & Docking > Windlasses
$1,297.00
ANCHORMAX™ Windlass Features:Has an extremely high power to weight ratioompact, fully sealed gearbox is driven by a vertically mounted, permanent magnet motorIntrusion below decks is minimised making the design ideal for boats from 5m (16ft) to 10m (32ft)Fitting to the boat is simplicity itself as no dismantling of the winch is requiredGear housings are marine-grade [...]
Out of stock
Anchoring & Docking > Windlasses
$1,419.00
The RC6 utilizes 6mm/7mm (1/4″) chain spliced to 12mm (1/2″) three strand or 8-plait rope. Maximum Pull: 660lbs. Providing most of the features of the larger RC8, the RC6 has been designed with the smaller, trailer boat market in mind. The in-line, vertical gearbox and motor means quick and easy installation by either the boat [...]
Out of stock
Anchoring & Docking > Windlasses
Maxwell RC12/10 12V Capstan Windlass f/3/8″ Chain & 3/4″ Rope
$5,456.00
RC12/10 12V Capstan Windlass The RC12 fully automatic windlass series is designed to effortlessly retrieve and deploy 10mm (3/8″) short link chain and 16mm (5/8″) to 20mm (3/4″) three strand or 8-Plait rope (RC12-10) and 12mm/13mm (1/2″) short link chain and 20mm (3/4″) three strand or 8-Plait rope (RC12-12). With a maximum pull of 1590 [...]
Anchoring & Docking > Windlasses
$469.99
DeckHand PontoonManufacturer item #1810141 For pontoons, this DeckHand gives you control of the winch from the helm as well as the flexibility to remove the winch from the boat to clear the deck. Automatically raise and lower your anchor at the touch of a button. DeckHand 40 has a 40-lb anchor capacity (anchor not included) [...]
Anchoring & Docking > Windlasses
Maxwell RC8-8 12V Windlass – for up to 5/16″ Chain, 9/16″ Rope
$2,431.00
Maximum Pull: 1320lbs The larger RC8-8 can be used with 8mm (5/16″) chain spliced to 14mm (9/16″) three strand or 8-plait rope. The ingeniously designed rope/chain gypsy (chainwheel) is able to accommodate a wide range of chain pitch differences within the specified chain size diameters suitable for use with the RC8 Series. Sleek, low profile [...]