12″ x 9″ Electro-Polished Edge Mount Trim Tab Kit
12 Volt
Fast response electric actuators for precise control. Fully submersible. All Plug & Play Deutsch connections. Electro-Polished blades are constructed of 12-gauge 304 stainless steel with 1″ turned up edges and an 85x inside taper and 1/8″ diameter stainless steel hinge pin. The actuators mount at the trailing edge of the blades, requiring 1/2″ less transom height than the standard mount tabs.
Kits include:
- (2) 12-gauge stainless steel Electro-Polished blades
- (2) 15054-001 actuator with 6′ leads and Deutsch connectors
- (2) 30133-103 20′ actuator extension wiring harnesses
- (2) 15085-001 upper mounting brackets with gland seal
- (2) 50014-001 lower mounting brackets
- Lenco owner’s/installation manual
- Stainless steel mounting hardware
Specifications:
- Boat Length:14′ – 18′
- L” x W”:12″ x 9″
- Hinge Height:2″
- Minimun Transom Height:11″
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
| Weight | 17 g |
|---|---|
| Dimensions | 14 × 13 × 5 cm |
Brand
Lenco Marine
Accessories
- Lenco Upper Mounting Bracket w/Gland Seal (2008-Present)
- Lenco Compact Upper Mounting Bracket - 2 Screws 1 Wire
- Lenco Standard Upper Mounting Bracket - 3 Screws 1 Wire
- Lenco Standard Lower Mounting Bracket - 3 Bolt
- Tecnoseal R1 Rudder Anode - Zinc - 1-7/8" Diameter
- Tecnoseal R2 Rudder Anode - Zinc - 2-13/16" Diameter
- Tecnoseal R3 Rudder Anode - Zinc - 3-3/4" Diameter
- Tecnoseal R1AL Rudder Anode - Aluminum - 1-7/8" Diameter
- Tecnoseal R2AL Rudder Anode - Aluminum - 2-13/16" Diameter
- Tecnoseal R3AL Rudder Anode - Aluminum - 3-3/4" Diameter
- Tecnoseal R1MG Rudder Anode - Magnesium - 1-7/8" Diameter
- Tecnoseal R2MG Rudder Anode - Magnesium - 2-13/16" Diameter
- Tecnoseal R3MG Rudder Anode - Magnesium - 3-3/4" Diameter
- Lenco Sacrificial Anodes - 1-7/8" - 2 Pack
- Lenco Sacrificial Anodes - 3-3/4" - 2 Pack
- Lenco Universal Actuator Mounting Bracket Replacement Kit
- Sika Sikaflex® 291 Fast Cure Adhesive & Sealant 10.3oz(300ml) Cartridge - White
- Sika Sikaflex® 291 Fast Cure Adhesive & Sealant 10.3oz(300ml) Cartridge - Black
- Sika Sikaflex® 291 LOT Slow Cure Adhesive & Sealant 10.3oz(300ml) Cartridge - White
- Sika Sikaflex® 291 LOT Slow Cure Adhesive & Sealant 10.3oz(300ml) Cartridge - Black
- Sika Sikaflex® 221 Multi-Purpose Polyurethane Sealant/Adhesive - 10.3oz (300ml) Cartridge - White
- Sika Sikaflex® 221 Multi-Purpose Polyurethane Sealant/Adhesive - 10.3oz(300ml) Cartridge - Black
- Sika Sikaflex® 221 Multi-Purpose Polyurethane Sealant/Adhesive - 10.3oz(300ml) Cartridge - Aluminum Gray
- Sudbury Elastomeric Marine Sealant - 10oz Cartridge - White
- Sudbury Elastomeric Marine Sealant - 10oz Cartridge - Black
- Sudbury Elastomeric Marine Sealant - 10oz Cartridge - Clear
- Sudbury Elastomeric 3 oz (89ml) Sealant Tube - White
- Sudbury Elastomeric 3 oz (89ml) Sealant Tube - Clear
- Sudbury Elastometric 3 oz (89ml) Sealant Tube - Black
- BoatLIFE Life-Calk Sealant Tube - Non-Shrinking - 2.8 FL. Oz - White
- BoatLIFE Life-Calk Sealant Tube - Non-Shrinking - 2.8 FL. Oz - Black
- BoatLIFE Life-Calk Sealant Tube - Non-Shrinking - 2.8 FL. Oz - Mahogany
- BoatLIFE Life-Calk Cartridge - White
- BoatLIFE Life-Calk Cartridge - Black
- BoatLIFE Life-Calk Cartridge - Mahogany
- BoatLIFE Life-Calk Cartridge - Teak Brown
- BoatLIFE Liquid Life-Calk Sealant Tube - 2.8 FL. Oz. - White
- BoatLIFE Liquid Life-Calk Sealant Tube - 2.8 FL. Oz. - Black
- BoatLIFE LifeSeal® Sealant Cartridge - Clear
- BoatLIFE LifeSeal® Sealant Cartridge - White
- BoatLIFE LifeSeal® Sealant Cartridge - Black
- BoatLIFE LifeSeal® Sealant Cartridge - Cameo
- BoatLIFE LifeSeal® Sealant Tube 2.8 FL. Oz - Clear
- BoatLIFE LifeSeal® Sealant Tube 2.8 FL. Oz - White
- BoatLIFE LifeSeal® Sealant Tube 2.8 FL. Oz - Black
No literature available for this product.
No videos available for this product.
Related products
Boat Outfitting > Trim Tabs
Bennett Trim Tabs are designed and manufactured with pride at the Bennett Marine plant in Deerfield Beach, Florida. Every Bennett system carries with it an accumulation of nearly 40 years of research, development, and testing and is designed to provide years of dependable service. Every trim tab is sheared and bent, not welded. Welding alters [...]
Boat Outfitting > Trim Tabs
Features: Wiring Color-coded wiring in 25′ to 40′ lengths with quick connects fittings, meets federal standards for heat, pull and insulation, making installation easy. Solenoids They are custom designed for Insta-Trim Boat Leveler Co., epoxy sealed and humidity resistant, thereby preventing shorting out. The solenoids lock the tabs in any position, eliminating driftback. Barb type [...]
Boat Outfitting > Trim Tabs
Features: Wiring Color-coded wiring in 25′ to 40′ lengths with quick connects fittings, meets federal standards for heat, pull and insulation, making installation easy. Solenoids They are custom designed for Insta-Trim Boat Leveler Co., epoxy sealed and humidity resistant, thereby preventing shorting out. The solenoids lock the tabs in any position, eliminating driftback. Barb type [...]
Boat Outfitting > Trim Tabs
Features: Wiring Color-coded wiring in 25′ to 40′ lengths with quick connects fittings, meets federal standards for heat, pull and insulation, making installation easy. Solenoids They are custom designed for Insta-Trim Boat Leveler Co., epoxy sealed and humidity resistant, thereby preventing shorting out. The solenoids lock the tabs in any position, eliminating driftback. Barb type [...]
Boat Outfitting > Trim Tabs
Bennett Trim Tabs are designed and manufactured with pride at the Bennett Marine plant in Deerfield Beach, Florida. Every Bennett system carries with it an accumulation of nearly 40 years of research, development, and testing and is designed to provide years of dependable service. Every trim tab is sheared and bent, not welded. Welding alters [...]
Boat Outfitting > Trim Tabs
Bennett Trim Tabs are designed and manufactured with pride at the Bennett Marine plant in Deerfield Beach, Florida. Every Bennett system carries with it an accumulation of nearly 40 years of research, development, and testing and is designed to provide years of dependable service. Every trim tab is sheared and bent, not welded. Welding alters [...]
Boat Outfitting > Trim Tabs
Bennett Trim Tabs are designed and manufactured with pride at the Bennett Marine plant in Deerfield Beach, Florida. Every Bennett system carries with it an accumulation of nearly 40 years of research, development, and testing and is designed to provide years of dependable service. Every trim tab is sheared and bent, not welded. Welding alters [...]
Boat Outfitting > Trim Tabs
Features: Wiring Color-coded wiring in 25′ to 40′ lengths with quick connects fittings, meets federal standards for heat, pull and insulation, making installation easy. Solenoids They are custom designed for Insta-Trim Boat Leveler Co., epoxy sealed and humidity resistant, thereby preventing shorting out. The solenoids lock the tabs in any position, eliminating driftback. Barb type [...]