Lee’s MX Pro Series Fixed Angle Center Rigger Holder – 45° – 1.5″ ID – Bright Silver
$315.00
Out of stock
MX Pro Series Fixed Angle Center Rigger Holder – 45° – 1.5″ ID – Bright Silver
The Center Rigger has proven to be an effective tool when trolling. It should be the highest outrigger when the others are deployed in the fishing position. Its line runs straight down the middle with its bait being the farthest back. The Center Rigger bait, more often than not, is the one struck after the other baits have streamed by.
- MX Pro Series (1-1/2″ID) is the solution for boats with a tower or when a lower angle is desired
- Slightly larger footprint (5″x 7″)
- Ruggedly constructed from marine grade anodized aluminum
- Can be easily attached above or below the standing platform or any flat surface
- Anodized in Bright Silver it is as strong as it is attractive
| Weight | 3.9 g |
|---|---|
| Dimensions | 15 × 13 × 11 cm |
Brand
Lee's Tackle
Accessories
- Sika Sikaflex® 291 Fast Cure Adhesive & Sealant 10.3oz(300ml) Cartridge - White
- Sika Sikaflex® 291 Fast Cure Adhesive & Sealant 10.3oz(300ml) Cartridge - Black
- Sika Sikaflex® 221 Multi-Purpose Polyurethane Sealant/Adhesive - 10.3oz(300ml) Cartridge - Black
- Sika Sikaflex® 221 Multi-Purpose Polyurethane Sealant/Adhesive - 10.3oz(300ml) Cartridge - Aluminum Gray
- Sika Sikaflex® 505UV High Performance Exterior Grade Sealant - 10.3oz(300ml) Cartridge - White
- Sika Sikaflex® 521UV UV Resistant LM Polyurethane Sealant - 10.3oz(300ml) Cartridge - White
- Sudbury Elastomeric Marine Sealant - 10oz Cartridge - White
- Sudbury Elastomeric Marine Sealant - 10oz Cartridge - Black
- Sudbury Elastomeric Marine Sealant - 10oz Cartridge - Clear
- Sudbury Elastomeric 3 oz (89ml) Sealant Tube - White
- Sudbury Elastomeric 3 oz (89ml) Sealant Tube - Clear
- Sudbury Elastometric 3 oz (89ml) Sealant Tube - Black
- BoatLIFE Life-Calk Sealant Tube - Non-Shrinking - 2.8 FL. Oz - White
- BoatLIFE Life-Calk Sealant Tube - Non-Shrinking - 2.8 FL. Oz - Black
- BoatLIFE Life-Calk Sealant Tube - Non-Shrinking - 2.8 FL. Oz - Mahogany
- BoatLIFE Life-Calk Cartridge - White
- BoatLIFE Life-Calk Cartridge - Black
- BoatLIFE Life-Calk Cartridge - Mahogany
- BoatLIFE Life-Calk Cartridge - Teak Brown
- BoatLIFE Liquid Life-Calk Sealant Tube - 2.8 FL. Oz. - White
- BoatLIFE Liquid Life-Calk Sealant Tube - 2.8 FL. Oz. - Black
- BoatLIFE LifeSeal® Sealant Cartridge - Clear
- BoatLIFE LifeSeal® Sealant Cartridge - White
- BoatLIFE LifeSeal® Sealant Cartridge - Black
- BoatLIFE LifeSeal® Sealant Cartridge - Cameo
- BoatLIFE LifeSeal® Sealant Tube 2.8 FL. Oz - Clear
- BoatLIFE LifeSeal® Sealant Tube 2.8 FL. Oz - White
- BoatLIFE LifeSeal® Sealant Tube 2.8 FL. Oz - Black
No literature available for this product.
No videos available for this product.
Related products
Hunting & Fishing > Outrigger Accessories
Lee’s Sidewinder Bolt-In Outrigger Mounts, Lay-Down Version – Silver(Pair)
Sidewinder Bolt-On Outrigger Mount Below top operation. Fully locked in Running and 80 degree out Trolling positions. Locks when handle is up or down. Rotates when handle is to the left or right. Fastest Lay-Down on the market. Automatically locks in position when raising or lowering the pole. No knobs to loosen or tighten. Just [...]
Hunting & Fishing > Outrigger Accessories
MX7000CR Adjustable Angle holders MX7000CR (1-1/2″ ID) are our strongest and most versatile holders. The three point mounting distributes the stress and provides side support. This heavy duty unit allows you to set your outrigger angle for maximum efficiency. The angle is set by positioning the clamp on the main tube during installation. The main [...]
Hunting & Fishing > Outrigger Accessories
Sidewinder Backing Plate f/Bolt-In Holders Below top operation. Fully locked in Running and 80° out Trolling positions. Locks when handle is up or down. Rotates when handle is to the left or right. Fastest Lay-Down on the market. Automatically locks in position when raising or lowering the pole. No knobs to loosen or tighten. Just [...]
Hunting & Fishing > Outrigger Accessories
Gunnel Mount Outrigger Holders Size: 2.0″Dimensions: 4 x 6 1/2 Attractive, Strong, and Bullet Proof all describe our Gunnel Mount Outrigger Holders. One piece flange construction. Plate, Tube and Bar-Pin are all cast simultaneously for the ultimate in strength. Curved Tube has Solid End Plug with Deep Slots to assure long service and reliability. Tubes [...]
Hunting & Fishing > Outrigger Accessories
Center Rigger Single Rig – No Release Clip 1 – Hanks Black Braided Line1 – 5/16in x 12in Tension Cords 1 – Eye Straps with Screws2 – Snap Swivels1 – Ball Stops *Release Clip NOT Included
Hunting & Fishing > Outrigger Accessories
Striker Base Gunnel MountF16-0150-F The TACO Striker skiff flush mount base is the strongest gunnel mount base on the market today.12 locking positions with our hex nut design including stand up and lay down.Manufactured to very high standards using marine grade cast 316 stainless steel.Ambidextrous arms. (will fit both port and starboard bases).Welded locking adapter [...]
Hunting & Fishing > Outrigger Accessories
AL7001CR The AL7001CR (1-3/8″ID) is the solution for boats with a tower or when a lower angle is desired. It has a slightly larger footprint (4″x 7″). Ruggedly constructed from marine grade anodized aluminum. It can be easily attached above or below the standing platform or any flat surface. It comes in a standard angle [...]
Hunting & Fishing > Outrigger Accessories
AL7301CR Fits 1.050″ Pipe The AL7300 (1-3/8″ID) series of Clamp-On Center Rigger Holders are available to fit standard size Schedule 40 Aluminum Pipe. Easy installation and unobtrusive design make this a popular installation where a horizontal pipe is available. This holder can also be used for other applications.