AL7001CR
The AL7001CR (1-3/8″ID) is the solution for boats with a tower or when a lower angle is desired. It has a slightly larger footprint (4″x 7″). Ruggedly constructed from marine grade anodized aluminum. It can be easily attached above or below the standing platform or any flat surface. It comes in a standard angle of 22 degrees that gives it a low rise. Anodized in Bright Silver it is as strong as it is attractive. It accepts all the same poles as the AL7000 series holders.
| Weight | 1.6 g |
|---|---|
| Dimensions | 14 × 9 × 5 cm |
Brand
Lee's Tackle
Accessories
- Lee's 12' MKII Bright Silver Pole w/Black Spike - 1 3/8" OD
- Lee's 16' MKII Bright Silver Pole w/Black Spike 1-3/8" OD - f/Center Riggers
- Lee's 13' Bright Silver Center Rigger Pole w/Black Spike 1-3/8"
- Lee's 15' Bright Silver/Black Spike - Step Tube 1-3/8" - No Spreader
- Sika Sikaflex® 291 Fast Cure Adhesive & Sealant 10.3oz(300ml) Cartridge - White
- Sika Sikaflex® 291 Fast Cure Adhesive & Sealant 10.3oz(300ml) Cartridge - Black
- Sika Sikaflex® 221 Multi-Purpose Polyurethane Sealant/Adhesive - 10.3oz(300ml) Cartridge - Black
- Sika Sikaflex® 221 Multi-Purpose Polyurethane Sealant/Adhesive - 10.3oz(300ml) Cartridge - Aluminum Gray
- Sika Sikaflex® 505UV High Performance Exterior Grade Sealant - 10.3oz(300ml) Cartridge - White
- Sika Sikaflex® 521UV UV Resistant LM Polyurethane Sealant - 10.3oz(300ml) Cartridge - White
- Sudbury Elastomeric Marine Sealant - 10oz Cartridge - White
- Sudbury Elastomeric Marine Sealant - 10oz Cartridge - Black
- Sudbury Elastomeric Marine Sealant - 10oz Cartridge - Clear
- Sudbury Elastomeric 3 oz (89ml) Sealant Tube - White
- Sudbury Elastomeric 3 oz (89ml) Sealant Tube - Clear
- Sudbury Elastometric 3 oz (89ml) Sealant Tube - Black
- BoatLIFE Life-Calk Sealant Tube - Non-Shrinking - 2.8 FL. Oz - White
- BoatLIFE Life-Calk Sealant Tube - Non-Shrinking - 2.8 FL. Oz - Black
- BoatLIFE Life-Calk Sealant Tube - Non-Shrinking - 2.8 FL. Oz - Mahogany
- BoatLIFE Life-Calk Cartridge - White
- BoatLIFE Life-Calk Cartridge - Black
- BoatLIFE Life-Calk Cartridge - Mahogany
- BoatLIFE Life-Calk Cartridge - Teak Brown
- BoatLIFE Liquid Life-Calk Sealant Tube - 2.8 FL. Oz. - White
- BoatLIFE Liquid Life-Calk Sealant Tube - 2.8 FL. Oz. - Black
- BoatLIFE LifeSeal® Sealant Cartridge - Clear
- BoatLIFE LifeSeal® Sealant Cartridge - White
- BoatLIFE LifeSeal® Sealant Cartridge - Black
- BoatLIFE LifeSeal® Sealant Cartridge - Cameo
- BoatLIFE LifeSeal® Sealant Tube 2.8 FL. Oz - Clear
- BoatLIFE LifeSeal® Sealant Tube 2.8 FL. Oz - White
- BoatLIFE LifeSeal® Sealant Tube 2.8 FL. Oz - Black
No literature available for this product.
No videos available for this product.
Related products
Hunting & Fishing > Outrigger Accessories
Lee’s Sidewinder Bolt-In Outrigger Mounts, Lay-Down Version – Silver(Pair)
Sidewinder Bolt-On Outrigger Mount Below top operation. Fully locked in Running and 80 degree out Trolling positions. Locks when handle is up or down. Rotates when handle is to the left or right. Fastest Lay-Down on the market. Automatically locks in position when raising or lowering the pole. No knobs to loosen or tighten. Just [...]
Hunting & Fishing > Outrigger Accessories
AL7304CR Fits 1.900″ Pipe The AL7300 (1-3/8″ID) series of Clamp-On Center Rigger Holders are available to fit standard size Schedule 40 Aluminum Pipe. Easy installation and unobtrusive design make this a popular installation where a horizontal pipe is available. This holder can also be used for other applications.
Hunting & Fishing > Outrigger Accessories
Gunnel Mount Outrigger Holders Size: 2.0″Dimensions: 4 x 6 1/2 Attractive, Strong, and Bullet Proof all describe our Gunnel Mount Outrigger Holders. One piece flange construction. Plate, Tube and Bar-Pin are all cast simultaneously for the ultimate in strength. Curved Tube has Solid End Plug with Deep Slots to assure long service and reliability. Tubes [...]
Hunting & Fishing > Outrigger Accessories
Lee’s Deluxe Rigging Kit – Single Rig Up To 37ft. – Black Mono
Deluxe Rigging Kit – Single Rig Up To 37ft. – Black Mono Features: Single Rig Up to 37ft. 150 feet of Black Mono 2 – 5/16in x 12in Tension Cords 4 – Eye Straps with Screws 4 – Snap Swivels 2 – Ball Stops Release Clips Not Included
Hunting & Fishing > Outrigger Accessories
TACO Backing Plates f/Grand Slam Outriggers – Anodized Aluminum
Backing Plates For Grand Slam Outriggers (pair)Part #: BP-150BSY-320-1 Specifically made for additional support for Grand Slam Outriggers when mounting to hard tops and gunnels. Made of Anodized Aluminum.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
Hunting & Fishing > Outrigger Accessories
Center Rigger Single Rig – No Release Clip 1 – Hanks Black Braided Line1 – 5/16in x 12in Tension Cords 1 – Eye Straps with Screws2 – Snap Swivels1 – Ball Stops *Release Clip NOT Included
Hunting & Fishing > Outrigger Accessories
Sidewinder Backing Plate f/Bolt-In Holders Below top operation. Fully locked in Running and 80° out Trolling positions. Locks when handle is up or down. Rotates when handle is to the left or right. Fastest Lay-Down on the market. Automatically locks in position when raising or lowering the pole. No knobs to loosen or tighten. Just [...]
Hunting & Fishing > Outrigger Accessories
The Original Wishbone Outrigger Holder The Original Wishbone Style Outrigger Holder has been in production for over 45 years. Setting the standard for the industry, our “Junior” outrigger holder has often been imitated, but never equaled. Its ease of operation, adjustable fishing angle, ability to lay down for bridges and small footprint makes it the [...]