AquaT Marine Electric Toilet
Available in a wide variety of different versions marketed under three basic models – standard and premium electric-powered or manual – the Johnson Pump AquaT marine toilet has been designed to meet virtually every conceivable lavatory installation situation onboard.
Priced competitively, the fine finish and well thought-through design of these toilets is remarkable. Made from white vitreous porcelain, and with corrosion resistant parts throughout, the Johnson Pump AquaT marine toilet, is quiet, robust and easy to clean.
Using the Johnson Pump AquaT marine toilet, water inlet and outlet takes place in two distinct steps. First the bowl is filled with clear water, and then the waste is flushed, leaving the bowl empty and clean, with no liquids sloshing about. Naturally, automatic back-flow prevention is incorporated into the design.
Most models can be ordered with standard, bevelled or low profiles in order to fit almost any hull and bulkhead configuration, and all are available in either compact or comfort versions so you can outfit your marine lavatory with the perfect-sized toilet, no matter what the layout.
The AquaT toilet will give you years of trouble free operation. When spare parts such as a new seat or valve are needed, you’ll find Johnson Pump’s global network of distributors at your service.Power models are shipped with well-proven Aqua Jet diaphragm pumps.
It’s probably fair to think of most toilets as commonplace products, but look at the features and you’re sure to see that the AquaT is far from ordinary. Quiet, hygienic and reliable, the Johnson Pump AquaT marine toilet is perfect for almost any marine toilet room.
CE-approved
Features
- Whisper quiet operation
- Self-priming pump
- One push button on control panel
- Clean lines – pleasing to the eye
- Hygienic, easy-to-clean vitreous china bowl and exterior surfaces
- Robust wooden seat with durable baked enamel finish
- Low water consumption (2-2.5 l/flush) makes the most of holding tank capacity
- Versatile plumbing connection options
- Automatic back-flow prevention
- Available in comfort or compact bowl sizes
- Designed for virtually any onboard mounting position
- May be installed above or below the waterline
- Suitable for OEM or replacement installation
- Corrosion resistant materials throughout
- Long service life
- Equipped with 12V Aqua Jet pumps
- Quick-connect hose or threaded connectors
- Complies with ISO 8846, ignition protection, and EN 55014 EMC
| Weight | 31.9 g |
|---|---|
| Dimensions | 19 × 17 × 16 cm |
Brand
Johnson Pump
Accessories
Literature
Owners Manual: Download PDF
Related products
Marine Plumbing & Ventilation > Marine Sanitation
Atlantes Freedom™ The Atlantes was one of the first toilets to incorporate the idea of having all components mounted within the bowl. The idea behind the Atlantes was to offer a metal handle on the side of the bowl to make the marine bathroom less intimidating for those not used to being on a boat. [...]
Marine Plumbing & Ventilation > Marine Sanitation
Hold n’ Treat with Purasan™ 15-Gallon Complete System Total onboard, environmentally friendly, waste management system utilizing the best available Type I MSD treatment technology, legal for use in all waters. A 15-gallon holding tank combined with a Type I MSD capable of processing up to 140 gallons of waste per week. Locking switch to prevent [...]
Marine Plumbing & Ventilation > Marine Sanitation
Sealed MaceratorSelf-Priming Macerator Pump with Run-Dry Protection Waste EvacuationThe Jabsco 18590 series DC macerator pump unit is the ideal solution for emptying marine holding tanks when not in a discharge restricted area. Self priming to 5ft this pump will empty a typical 30 gallon (115 Liter) holding tank in less than 3 minutes. Duty cycle [...]
Marine Plumbing & Ventilation > Marine Sanitation
In-Line Non-return Valve Non-return valves help priming and prevent backflow of water into the bilge. WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
Marine Plumbing & Ventilation > Marine Sanitation
Atlantes Freedom™ The Atlantes was one of the first toilets to incorporate the idea of having all components mounted within the bowl. The idea behind the Atlantes was to offer a metal handle on the side of the bowl to make the marine bathroom less intimidating for those not used to being on a boat. [...]
Marine Plumbing & Ventilation > Marine Sanitation
Hold N’ Treat System Total onboard, environmentally friendly, waste management system utilizing the best available Type I MSD treatment technology, legal for use in all waters. A 15 gallon holding tank combined with a Type I MSD capable of processing up to 140 gallons of waste per week. Locking switch to prevent accidental discharge. Standard [...]
Marine Plumbing & Ventilation > Marine Sanitation
Atlantes Freedom™ The Atlantes was one of the first toilets to incorporate the idea of having all components mounted within the bowl. The idea behind the Atlantes was to offer a metal handle on the side of the bowl to make the marine bathroom less intimidating for those not used to being on a boat. [...]
Marine Plumbing & Ventilation > Marine Sanitation
Atlantes Freedom™ The Atlantes was one of the first toilets to incorporate the idea of having all components mounted within the bowl. The idea behind the Atlantes was to offer a metal handle on the side of the bowl to make the marine bathroom less intimidating for those not used to being on a boat. [...]