1.1 Pump/Faucet Combo – 12V
- Chrome plated brass faucet (includes compression fitting hardware)
- Integrated 35 psi shutoff pressure switch
- Lower power consumption (2.5 amps at 12 volt)
- Quiet operation and self priming
- 12 Volts
| Weight | 2.9 g |
|---|---|
| Dimensions | 13 × 10 × 4 cm |
Brand
Johnson Pump
No accessories available for this product.
No literature available for this product.
No videos available for this product.
Related products
Marine Plumbing & Ventilation > Marine Sanitation
Vented Loop Vented loops are anti-siphon safety devices for use with both manual and electric marine toilets installed below the waterline (static or heeled) WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go [...]
Marine Plumbing & Ventilation > Marine Sanitation
Waste PumpRobust Single Diaphragm Design Features: Flexible installation No filter required Compact and simple design Dry running capability Connections for 38mm (1 1/2″) ports Up to 19 lpm (5 US gpm) flow Relevant Standards: ISO 8846 MARINE and USCG Regulations for Ignition Protection ISO 8849 MARINE Bilge Pump Standard Built to ISO 15083 Specification Meets [...]
Marine Plumbing & Ventilation > Marine Sanitation
PAR-Max 3 3.5 GPM Water System PumpShower Drain and General Purpose Pump Features:Self-PrimingRuns Dry Without DamageSmooth FlowFour Piston, Diaphragm SealedPowerful MotorSnap-In Swivel PortsMeets USCG & ISO 8846 Ignition Protection Standards WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information [...]
Marine Plumbing & Ventilation > Marine Sanitation
Tank Monitor The finest holding tank monitor available with easy-to-read tank level indicators. Monitors up to four tanks from one convenient location. The Tank Monitor provides convenient, reliable, maintenance-free monitoring of one to four fresh, gray and waste water tanks. All components are mounted outside of the tanks for dependable operation, eliminating the need for [...]
Marine Plumbing & Ventilation > Marine Sanitation
Hold N’ Treat System Total onboard, environmentally friendly, waste management system utilizing the best available Type I MSD treatment technology, legal for use in all waters. A 15 gallon holding tank combined with a Type I MSD capable of processing up to 140 gallons of waste per week. Locking switch to prevent accidental discharge. Standard [...]
Marine Plumbing & Ventilation > Marine Sanitation
12 Volt EMC Waste Pump Assembly for Quiet Flush Electric Toilets WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
Marine Plumbing & Ventilation > Marine Sanitation
Run-Dry Macerator Waste Pump WASTE EVACUATION The Jabsco 18590 series DC macerator pump unit is the ideal solution for emptying marine holding tanks when not in a discharge restricted area. Self priming to 5ft this pump will empty a typical 30 gallon (115 Liter) holding tank in less than 3 minutes. Duty cycle of the [...]
Marine Plumbing & Ventilation > Marine Sanitation
Raritan Sea Era Electric Toilet – Household Style – Integral Pump – Straight & 90° Discharge – 12v
Sea Era The SeaEra was designed to fit in small spaces and allows users to rotate the base in 90 degree increments when the floor space is oddly shaped or was designed for a manual toilet with a pump and long base. The “original” SeaEra has an integral intake pump so all connections are at [...]