Sliding Vane Self-Priming Diesel Transfer Pump – 9 GPM & 12V
Designed for refuelling small sizes diesel powered vehicles [typical tank sizes up to 200 litres (50 U.S. gallons)] from drums.
Suitable for mounting to the following equipment: Excavators, Cranes, Road rollers (compactors), Pavers, Agricultural machines, Generators, Helicopters.
Suitable for diesel fuel, Kerosene, Paraffin, Hydraulic oils, Oils up to 150 centi Stokes (750 Saybolt Universal) viscosity. .
Features:
- Faster refuelling – 35 litres/minute (9.5 U.S.GPM).
- High head capability – 6 metres (19 feet).
- Self priming up to 2.8 metres (9 feet).
- Vibration tested. • IP55 protected motor
Specifications:
- Temperature Range : -30°C to +40°C (-22°F to +104°F)
- Pump Body : Aluminium
- Rotor : Vectra
- Vanes : PTFE Filled Ryton
- Shaft : Steel
- Seal : Nitrile
- Lip Seal Ports : Vertical ½¨ BSP or 19mm hose adaptors (¾¨)
- Motor : 12V permanent magnet, corrosion resistant IP55 protected
- Duty : 25 mins @ +40°C (104°F)
- Current Draw: 15 Amps @ 3m head
- Maximum Current: 20 Amps
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Brand
Jabsco
No accessories available for this product.
Literature
Brochure: Download PDF
No videos available for this product.
Related products
Uncategorized
M265C-LH Low/High CHIRP In-Hull Transducer The Airmar M265C-LH is a 1,000W transducer designed to work with chirp sonar systems and utilizes the Low and High-Frequency ranges (Frequency Range Below). The M265C has 8 highly sensitive internal broadband ceramic assemblies to accurately mark depth, bait, and fish, making it the perfect choice for commercial and recreational [...]
Uncategorized
Light Duty Diesel Transfer Vane Pump – 24V Features: The pump head may be mounted at 90° increments on the motor to allow mounting as needed Meets USCG 183.410 & ISO8846 Marine (Ignition Protection) Specifications: Body Materials: Bronze Rotor: Plastic – Liquid Crystal Polymer Vanes: Plastic – Polyphenylene Sulfide Seal – Nitrile Lip Seal Shaft [...]
Marine Plumbing & Ventilation > Transfer Pumps
GROCO Heavy Duty Positive Displacement Reversing Vane Pump – 12V
Heavy Duty Positive Displacement Reversing Vane Pump – 12V GROCO Vane Pumps are self-priming, are instantly reversible, and are capable of operation in either direction. Relatively high flow (more than gear pumps) makes them suitable for general purpose duties such as deck-wash, bilge pumping (filtered inlet), fuel transfer, ballast transfer, and oil change. All models [...]
Marine Plumbing & Ventilation > Transfer Pumps
Shurflo by Pentair PIRANHA™ Ballast 1100 Pump – 12 VDC, 1100 GPH
PIRANHA™ Ballast 1100 Pump – 12 VDC, 1100 GPH Everything you are looking for in a ballast pump. Our tough, high density nylon housing and heavy duty water cooled motor give the PIRANHA ballast pumps unparalleled reliability. Anti airlock feature allows the pump to clear trapped air. All ballast series pumps have a removable cartridge [...]
Marine Plumbing & Ventilation > Transfer Pumps
Handy-Mate Utility Pump Beckson’s Handy-Mate pumps can be used around the home, car, RV or anywhere to handle routine and emergency pumping jobs. They are designed to handle all the routine pumping jobs, plus the unusual ones. They can pump water out of bilges, sump tanks and from one tank to another, or pump oil [...]
Uncategorized
Light Duty Vane PumpDiesel Transfer Pump Flow rate: 6 USgallons/minSelf-priming from dry up to 3ft The Jabsco Reversible Rotary Vane Pump is ideal for transferring diesel fuel. It is self-priming to about three feet and can pump against a discharge head up to twenty feet. Features: The pump head may be mounted at 90° increments [...]
Uncategorized
Lowrance Extension Cable 25′ extension cable. For use with LGC-3000 and red NMEA network.
Marine Plumbing & Ventilation > Transfer Pumps
Inline Electric Galley Pump – 13LPM – 12V Whale electric galley pump range includes models with the very latest electronic technology. All pumps are manufactured from only highest quality inhouse moulded parts and robust motors. We have developed our pump designs based on more than 60 years of expertise. Today we have used that experience [...]