Mag Drive Centrifugal Pump – 21GPM – 110V AC
Designed for applications that require a safe and leak free, continuous duty pump. Great for marine air conditioning circulation, Ice Makers, Hot water circulation, Livewell and Bait tank installations.
Pump Head is manufactured in chemical resistant thermo-plastics – entirely non-metallic.
UL listed, ignition and thermally protected fan cooled motor.
Features:
- 21.13 GPM open Flow
- 110V AC 60Hz
- 3/4″ NPT ports for easy connection
- 18 foot head
WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
| Weight | 7.7 g |
|---|---|
| Dimensions | 11 × 10 × 7 cm |
Brand
Jabsco
No accessories available for this product.
Literature
Quick Guide: Download PDF
No videos available for this product.
Related products
Marine Plumbing & Ventilation > Washdown / Pressure Pumps
Aqua Jet Wash Down PumpsThe new generation of wash down pumps – 12V DC. Quiet and pulsation-free, the new Aqua Jet five-chamber diaphragm pump from SPX Johnson Pump provides the perfect deckwash solution for both small and medium sized leisure and commercial boats. With a pressure of 5 bar, clean-up is faster and easier than [...]
Marine Plumbing & Ventilation > Washdown / Pressure Pumps
Utility Pump The 6050-Series pumps are the highest capacity, self-priming, portable Utility Pumps offered by Jabsco Bronze pump head 23 GPM output at 10ft total head Continuous duty motor with thermal over-load protection Motor wired to operate with 115v and can be converted to 230v Open drip proof motor 8′ power cord with grounded plug [...]
Marine Plumbing & Ventilation > Washdown / Pressure Pumps
Aqua Jet Water Pressure Systems – 3.5GPM – 12V The five chamber Aqua Jet WPS-series provides a reliable heart for small boat and recreational vehicle water pressure systems. Compared to conventional three or four-chamber diaphragm pumps, the Aqua Jet demonstrates dramatically lower noise and water pulsation characteristics. It is recommended to install the WPS-pumps with [...]
Marine Plumbing & Ventilation > Washdown / Pressure Pumps
Shurflo by Pentair AQUA KING™ II Standard Fresh Water Pump – 12 VDC, 3.0 GPM
AQUA KING™ II Standard Fresh Water Pump – 12 VDC, 3.0 GPM SHURFLO’s 4138 fresh water pump design was created with a unique over-molded single-piece diaphragm and internal by-pass, assuring long life and top performance in all plumbing systems. The 4138 pump is constructed for smooth flow and no rapid cycling. The 4138 fresh water [...]
Marine Plumbing & Ventilation > Washdown / Pressure Pumps
2″ Bronze Pedestal Pump Flow rate: Nominal 60 gallons/min at 1500 rpmSelf-priming from dry up to 7.8ft Features: Constructed from marine quality bronze and stainless steel for ruggedness and reliability. Easy to service and maintain. Inexpensive to buy and operate. Will tolerate abrasive wear (this may affect performance – seek advice from your distributor). Handles [...]
Marine Plumbing & Ventilation > Washdown / Pressure Pumps
Low Pressure Cyclone Centrifugal Pump – 12V Silent running. Single tool servicing. 2m (6 foot) suction lift when wet. A range of Stainless Steel General Purpose Centrifugal pumps designed specifically for the marine and industrial markets. Typical applications would be for circulation applications such as hot water systems, livewell or bait tank installations. Features: Heavy [...]
Marine Plumbing & Ventilation > Washdown / Pressure Pumps
Bronze AC Motor Pump Unit Flow rate: 3.4 USgpm, maximum head 40ft (17.3psi)Self-priming from dry up to 4.9ft Features: Easy to service and maintain. Will tolerate abrasive wear (this may affect performance – seek advice from your distributer). Handles hard and soft solids without clogging. Non pulsating flow WARNING: This product can expose you to [...]
Marine Plumbing & Ventilation > Washdown / Pressure Pumps
Commercial Duty Water Puppy Flow rate: 34 litres/min (9 USgallons/min)Self-priming from dry up to 1.2m (4ft) Features: Small bilge debris present no problem to these bronze bodied, flexible impeller pumps. Simple design means fewer wearing parts. ISO 8846 MARINE (Ignition protection). ISO 8849 MARINE (Bilge pump standard). MotorPermanent magnet type, fully enclosed, stainless steel shaft, [...]