Mag Drive Centrifugal Pump – 11GPM – 110V AC
Designed for applications that require a safe and leak free, continuous duty pump. Great for marine air conditioning circulation, Ice Makers, Hot water circulation, Livewell and Bait tank installations.
Pump Head is manufactured in chemical resistant thermo-plastics – entirely non-metallic.
UL listed, ignition and thermally protected fan cooled motor.
Features:
- 11.35 GPM open Flow
- 110V AC 60Hz
- 1/2″ NPT ports for easy connection
- 18 foot head
WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
| Weight | 6.8 g |
|---|---|
| Dimensions | 11 × 10 × 8 cm |
Brand
Jabsco
No accessories available for this product.
Literature
Quick Guide: Download PDF
No videos available for this product.
Related products
Marine Plumbing & Ventilation > Washdown / Pressure Pumps
Low Pressure Cyclone Centrifugal Pump – 12V Silent running. Single tool servicing. 2m (6 foot) suction lift when wet. A range of Stainless Steel General Purpose Centrifugal pumps designed specifically for the marine and industrial markets. Typical applications would be for circulation applications such as hot water systems, livewell or bait tank installations. Features: Heavy [...]
Marine Plumbing & Ventilation > Washdown / Pressure Pumps
1″ Electro-Magnetic Clutch Pump Flow rate: Nominal 23 US Gallons/min at 1750 RPMSelf-priming from dry up to 7.8ft Features: Constructed from marine quality bronze and stainless steel for ruggedness and reliability. Easy to service and maintain. Inexpensive to buy and operate. Will tolerate abrasive wear (this may affect performance – seek advice from your distributor). [...]
Marine Plumbing & Ventilation > Washdown / Pressure Pumps
Aqua Jet Wash Down PumpsThe new generation of wash down pumps – 12V DC. Quiet and pulsation-free, the new Aqua Jet five-chamber diaphragm pump from SPX Johnson Pump provides the perfect deckwash solution for both small and medium sized leisure and commercial boats. With a pressure of 5 bar, clean-up is faster and easier than [...]
Marine Plumbing & Ventilation > Washdown / Pressure Pumps
Water Booster System – 40PSI – 4.5GPM – 115V The Flojet 2840 Series Booster Systems are designed to provide constant water pressure of 0 to 40 psi (0.7 to 2.7 bar) and a maximum flow rate of 4.5 GPM at 10 psi (0.7 bar). The pump is fully automatic, with a built-in inlet strainer, pressure [...]
Marine Plumbing & Ventilation > Washdown / Pressure Pumps
Shurflo by Pentair AQUA KING™ II Standard Fresh Water Pump – 12 VDC, 3.0 GPM
AQUA KING™ II Standard Fresh Water Pump – 12 VDC, 3.0 GPM SHURFLO’s 4138 fresh water pump design was created with a unique over-molded single-piece diaphragm and internal by-pass, assuring long life and top performance in all plumbing systems. The 4138 pump is constructed for smooth flow and no rapid cycling. The 4138 fresh water [...]
Marine Plumbing & Ventilation > Washdown / Pressure Pumps
Johnson Pump Flow Master 5.0 GPH Variable Flow Demand Pump 12V
Aqua Jet Flow Master 5.0 WPSThe ideal choice for pressurizing water in a closed system. The digital controller adjusts water flow asthe demand is increased and decreased while maintaining a very smooth flow. The unique variable flowfeature of the Flow Master pump allows the pump to be mounted without an accumulator tank and still maintain [...]
Marine Plumbing & Ventilation > Washdown / Pressure Pumps
Bronze AC Motor Pump Unit Flow rate: 3.4 USgpm, maximum head 40ft (17.3psi)Self-priming from dry up to 4.9ft Features: Easy to service and maintain. Will tolerate abrasive wear (this may affect performance – seek advice from your distributer). Handles hard and soft solids without clogging. Non pulsating flow WARNING: This product can expose you to [...]
Marine Plumbing & Ventilation > Washdown / Pressure Pumps
General Purpose Centrifugal PumpEnd Suction Centrifugal Pump The Rule General Purpose Pump is designed for use as a washdown pump and/or to circulate water to your livewell tank(s). Heavy duty construction for use on commercial or pleasure boats. 1-1/2″ (38mm) inlet and 1-1/2″ (38mm) discharge outlet. The Rule General Purpose Pump must be mounted below [...]