AS EC 30E Ethernet Cable – 30′
The Ethernet Cable is a 30′ cable that allows the connection of two Ethernet capable units to be connected.
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
| Weight | 1.35 g |
|---|---|
| Dimensions | 9 × 8 × 4 cm |
Brand
Humminbird
No accessories available for this product.
Literature
Owners Manual: Download PDF
No videos available for this product.
Related products
Marine Navigation & Instruments > Network Cables & Modules
6′ Extension cable fits all 2007 and newer Ethernet-enabled Lowrance units with 5-pin yellow connector
Marine Navigation & Instruments > Network Cables & Modules
NEP-2 Network Expansion Port Lowrance NEP-2 Network Expansion Port-2 plug-and-play hub for high-speed data-sharing of multiple HDS, LCX,and LMS products with ethernet modules, like the LWX-1 SIRIUS Satellite Radar and Radio module and the Broadband Sounder module across the onboard network. Lowrance NEP-2 Waterproof expansion ports resist corrosive marine environments. Unused expansion ports capped for [...]
Marine Navigation & Instruments > Network Cables & Modules
AS-EC-15E Ethernet Cable – 15′ Features:15′ Ethernet cableFemale connectors on both endsUse AS ECX 30E for cable extensionFor use with Humminbird Ethernet Systems only Compatibility:1100 Series™: All models900 Series™: 958c, 998c SI800 Series™: 858c, 898c SI700 Series™: Ethernet Models – 778c HD, 788ci HD, 798ci HD WARNING: This product can expose you to chemicals including [...]
Marine Navigation & Instruments > Network Cables & Modules
Termination Resistors are required on a NMEA 2000 network and are placed at each end of a network trunk cable. Like the double-ended cordsets, the termination resistors are waterproof and continue to function even while submerged in the bilge. Diagnostic versions indicate correct polarity at a glance to ensure power connections have been made properly [...]
Marine Navigation & Instruments > Network Cables & Modules
ETHEXT-25YL 25 ft. Ethernet Cable Works with: Broadband Sounder-1, GlobalMap 5200C, GlobalMap 5300C iGPS, GlobalMap 7200C, GlobalMap 7300C HD, GlobalMap 8200C, GlobalMap 8300C HD, GlobalMap 9200C, GlobalMap 9300C HD, GlobalMap Baja 540C, GlobalMap Baja 840C, LCX-112C, LCX-113C HD, LCX-27C, LCX-28C HD, LCX-37C, LCX-38C HD, LMS-520C, LMS-522C iGPS, LMS-525C DF, LMS-527C DF iGPS, Navico Expansion Port-1
Marine Navigation & Instruments > Network Cables & Modules
MDA-3 Metadata AIS Zero Loss Antenna Splitter Utilizes a compact (5.5″X3.9″X1.9″) module that is IPx7 Waterproof rated, for flexible location and rugged performance in any marine environment. The Metadata AIS Zero Loss Antenna Splitter allows for the full use of VHF communications and AIS send/receive with a single antenna. This sophisticated antenna splitter was developed [...]
Marine Navigation & Instruments > Network Cables & Modules
Marine Network Cable PoE Isolation Coupler Connect a FLIR M- or MD- Series camera to a compatible 8000 series Garmin chartplotter with this PoE (Power over Ethernet) isolation coupler. The coupler provides connectivity to the Garmin Marine Network; without it the network will not function correctly and could possibly damage your Garmin unit and/or PoE [...]
Marine Navigation & Instruments > Network Cables & Modules
Ethernet Cable – 10 FeetQuickly setup an ethernet connection between two Humminbird ethernet capable units.Available in four lengths. WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.