The new NMEA 2000 analog adapters are the perfect accessories to bring any helm into the digital age. Simple to install and easy to set up, the NMEA 2000 adapters take signals generated by traditional analog gauges and sensors and convert that data into NMEA 2000 format. The data can then be broadcast over NMEA 2000 protocol to the Garmin GMI 10 multifunction instrument display. The combination of these adapters with a Garmin GMI 10 will transform even the most out-of-date dashboard into a glass, digital helm.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
| Weight | 1.2 g |
|---|---|
| Dimensions | 6 × 6 × 2 cm |
Brand
Garmin
Accessories
- Garmin NMEA 2000 Backbone/Drop Cable (1 Ft.)
- Garmin NMEA 2000 Backbone Cable (2M)
- Garmin NMEA 2000 Backbone Cable (6M)
- Garmin NMEA 2000 Backbone Cable (10M)
- Garmin NMEA 2000 T Connector
- Garmin NMEA 2000 Terminator, Male
- Garmin NMEA 2000 Terminator, Female
- Garmin NMEA 2000 Field Installable Connector, Male
- Garmin NMEA 2000 Field Installable Connector, Female
- Garmin NMEA 2000 In-Line Terminator
- Garmin 6' NMEA 2000 Cable - Right Angle
- Garmin NMEA 2000 Power Cable
- Garmin NMEA 2000 Starter Kit
- Garmin NMEA 2000 Network Updater
- Garmin NMEA 2000 Power Isolator
- Garmin NMEA 2000® Backbone/Drop Cable (4M)
- Garmin NMEA 2000® Multi-Port T-Connector
Literature
Owners Manual: Download PDF
No videos available for this product.
Related products
Marine Navigation & Instruments > NMEA Cables & Sensors
Micro Inline Termination Resistor The inline terminator is used where the NMEA 2000® network is terminated at a product, for example the top of the mast at a weather instrument or GPS antenna/receiver. The inline terminator plugs directly into the product with the other end connected to the network cable Micro Termination resistors usually terminate [...]
Marine Navigation & Instruments > NMEA Cables & Sensors
N2KEXT-15RD 15′ NMEA 2000 Cable 15′ NMEA 2000 Cable
Marine Navigation & Instruments > NMEA Cables & Sensors
Furunos NX300 paperless Navtex receiver is the most economical way of monitoring navigational warnings, meteorological warnings, search and rescue information and other data for ships sailing within 200-400 n.m. of shore. Every incoming message is identified and new messages are read from the high-contrast 4.5″ LCD display, no paper is required. However, you can print [...]
Marine Navigation & Instruments > NMEA Cables & Sensors
Micro Termination Resistors Termination Resistors are required on a NMEA 2000® network and are placed at each end of a network trunk cable. Like the double-ended cordsets, the termination resistors are waterproof and continue to function even while submerged in the bilge. Screw terminal connector for positive connections Termination resistors are used to terminate both [...]
Marine Navigation & Instruments > NMEA Cables & Sensors
NMEA Cable, 1 x 6 Pin Connector, 5 Meters WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Marine Navigation & Instruments > NMEA Cables & Sensors
The SeaTalkng Backbone kit contains everything you need to construct and wire a basic SeaTalkng navigation network backbone on board your vessel. The kit contains the following components: A06031 SeaTalkng Terminators (Qty. 2) A06037 Backbone Cable, 20m A06036 Backbone Cable, 5m (Qty. 2) A06028 T-Piece (Qty. 4) A06049 Network Power Cable 81300 SeaTalkng Reference Manual [...]
Marine Navigation & Instruments > NMEA Cables & Sensors
TLA100 NMEA 2000®Tank Level Adapter The TLA100 is used to adapt commercially available resistive tank senders to the NMEA 2000® network. This allows you to observe tank levels anywhere on the vessel where there is an NMEA 2000® compatible display such as the Maretron DSM200. The TLA100 is compatible with both the American standard (240-33 [...]
Marine Navigation & Instruments > NMEA Cables & Sensors
J2K100 NMEA 2000® / J1939 Bridge (Engine/Transmission/Genset Gateway) Maretron’s J2K100 attaches directly into J1939 networks of compatible engines, transmissions, and gensets and converts the J1939 engine data to the NMEA 2000® marine digital interface. Critical engine, transmission, and genset data is then distributed throughout the vessel over a single cable where it can be monitored [...]