Field Installable Adapter Kit for Garmin BlueNet™ Network
Use these field installable connectors to wire a Garmin BlueNet™ network cable that does not have a factory-installed connector.
| Weight | 0.6 g |
|---|---|
| Dimensions | 10 × 6 × 3 cm |
Brand
Garmin
Accessories
Literature
Owners Manual: Download PDF
No videos available for this product.
Related products
Marine Navigation & Instruments > Network Cables & Modules
6′ Extension cable fits all 2007 and newer Ethernet-enabled Lowrance units with 5-pin yellow connector
Marine Navigation & Instruments > Network Cables & Modules
MDA-3 Metadata AIS Zero Loss Antenna Splitter Utilizes a compact (5.5″X3.9″X1.9″) module that is IPx7 Waterproof rated, for flexible location and rugged performance in any marine environment. The Metadata AIS Zero Loss Antenna Splitter allows for the full use of VHF communications and AIS send/receive with a single antenna. This sophisticated antenna splitter was developed [...]
Marine Navigation & Instruments > Network Cables & Modules
SeaTalkhs Crossover Coupler For networking only two devices, choose the SeaTalkhs crossover coupler. The Raymarine SeaTalkhs Crossover coupler provides a secure, waterproof means to join together SeaTalkhs Ethernet cables with RJ45 male connections. The Crossover Coupler is also handy when adapting SeaTalkhs devices like radar scanners for direct-connection to new generation multifunction displays. Use it [...]
Marine Navigation & Instruments > Network Cables & Modules
Marine Network Cable PoE Isolation Coupler Connect a FLIR M- or MD- Series camera to a compatible 8000 series Garmin chartplotter with this PoE (Power over Ethernet) isolation coupler. The coupler provides connectivity to the Garmin Marine Network; without it the network will not function correctly and could possibly damage your Garmin unit and/or PoE [...]
Marine Navigation & Instruments > Network Cables & Modules
SeaTalk hs Network Cable, 20m Raymarine SeaTalk hs network cables provide waterproof, reliable, high-speed connections between E-Series components. Available in multiple lengths to simplify installation, the network cable locks positively into E-Series displays, switches and couplers. A 1.5 meter SeaTalk hs cable is supplied with each E80 and E120 display.
Marine Navigation & Instruments > Network Cables & Modules
Use cable coupler to join 2 marine network cables end to end WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Marine Navigation & Instruments > Network Cables & Modules
AS EC 30E Ethernet Cable – 30′ The Ethernet Cable is a 30′ cable that allows the connection of two Ethernet capable units to be connected. WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more [...]
Marine Navigation & Instruments > Network Cables & Modules
AS-EC-15E Ethernet Cable – 15′ Features:15′ Ethernet cableFemale connectors on both endsUse AS ECX 30E for cable extensionFor use with Humminbird Ethernet Systems only Compatibility:1100 Series™: All models900 Series™: 958c, 998c SI800 Series™: 858c, 898c SI700 Series™: Ethernet Models – 778c HD, 788ci HD, 798ci HD WARNING: This product can expose you to chemicals including [...]