Class B Compact v2 Drive Unit
The Class B Drive Unit works with the Reactor 40 Mechanical/Retrofit/Solenoid Corepack to control your sailboat’s steering system. This device is designed for use with sailboats with up to 48,400 lbs of displacement.
Specifications:
- Dimensions (WxHxD, centered): 31.9 x 4.6″ x 8.9″ (810 x 120 x 225 mm)
- Drive unit type: Integrated hydraulic linear
- Stroke length: 10″ (254 mm)
- Maximum thrust: 1,610 lbs (730 kg)
- Supply voltage: 10V to 30 V (regulated to 12V by the ECU)
- Average clutch current at 12V: 1 Amp
- Average motor current at 12V: 2-4 Amps
- Operating temperature: -15° C to 50° C
Brand
Garmin
No accessories available for this product.
Literature
Installation Guide: Download PDF
No videos available for this product.
Related products
Marine Navigation & Instruments > Autopilots
Type 3 Hydraulic Linear – 12V Type 3 Hydraulic Linear system for mechanically steered vessels up to 77,000lb (35,000kg) displacement. The hydraulic linear drive system is designed for boats with existing mechanical steering systems, not hydraulic steering systems. It provides a totally isolated autopilot steering system consisting of: Features: Hydraulic ram: a self-contained autopilot steering [...]
Marine Navigation & Instruments > Autopilots
ST1000 Plus Tiller Pilot ST1000 Plus tiller autopilot for tiller steered sailing vessels up to 6,600 lbs (3,000 kg) *Note: Always take the fully laden displacement weight of the vessel into account; this is often 20% above the designed displacement. Includes: Instruction Manual Plus Tiller Pilot 12V Socket Tiller Pin Mounting Socket
Marine Navigation & Instruments > Autopilots
5M Extension Cable Garmin 5M (16.40 ft) extension cable for your GHP™ 10 is the perfect accessory for mounting the CCU further than 3M (9.84 ft) from the ECU. Compatible Devices:GHP™ 10 Marine Autopilot System WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth [...]
Marine Navigation & Instruments > Autopilots
LF3000 LF3000 is a linear feedback unit for boats with outboard engine. It transforms the linearmovement to an analog signal. Supplied with 8,5 m cable and mounting clamps. The LF3000 is a waterproof feedback unit. It has a 300 mm (11,8″) stroke and comes with a special mounting bracket which secures the LF3000 to the [...]
Marine Navigation & Instruments > Autopilots
Furuno Rudder Reference f/Outboards On Navpilot 500 & 511 Autopilots
The FAPAR4502 is a Rudder Reference Unit for the NavPilot 500/OB and NavPilot 511/OB series autopilot. The FAPAR4502 has an 8″ maximum cylinder stroke. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. [...]
Marine Navigation & Instruments > Autopilots
Autopilot Pump, 12 VDC, 1.0 Cubic Inches Per Second (For Ram Sizes of Up to 12 Cubic Inches in Volume) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not [...]
Marine Navigation & Instruments > Autopilots
Push Rod Extension Simrad’s 120mm (4.8″) Push Rod Extension
Marine Navigation & Instruments > Autopilots
Type 2 Pump 12Volt Reversing hydraulic pump for use with steering systems equipped with 9.821 cubic inch (160-350cc) hydraulic steering rams. Compatible with 400 Series corepacks. Designed for boats with existing hydraulic steering systems.