BlueNet™ Network Cable – 1′
This short Garmin BlueNet™ network cable is used to connect a Garmin BlueNet™ 20 switch or Garmin BlueNet™ 30 gateway to each other, or other Garmin BlueNet network products.
| Weight | 0.15 g |
|---|---|
| Dimensions | 7 × 6 × 1 cm |
Brand
Garmin
No accessories available for this product.
No literature available for this product.
No videos available for this product.
Related products
Marine Navigation & Instruments > Network Cables & Modules
NavNet Ethernet Cable, 6P(F) – 6P(F) Cross Over Cable, 5 Meters WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Marine Navigation & Instruments > Network Cables & Modules
Rugged, high-speed, moisture – and solvent-resistant data cables withstand the toughest onboard marine environments. For Lowrance models with 5-pin yellow ethernet connector.
Marine Navigation & Instruments > Network Cables & Modules
Termination Resistors are required on a NMEA 2000 network and are placed at each end of a network trunk cable. Like the double-ended cordsets, the termination resistors are waterproof and continue to function even while submerged in the bilge. Diagnostic versions indicate correct polarity at a glance to ensure power connections have been made properly [...]
Marine Navigation & Instruments > Network Cables & Modules
NEP-2 Network Expansion Port Lowrance NEP-2 Network Expansion Port-2 plug-and-play hub for high-speed data-sharing of multiple HDS, LCX,and LMS products with ethernet modules, like the LWX-1 SIRIUS Satellite Radar and Radio module and the Broadband Sounder module across the onboard network. Lowrance NEP-2 Waterproof expansion ports resist corrosive marine environments. Unused expansion ports capped for [...]
Marine Navigation & Instruments > Network Cables & Modules
Navico SonarHub™ Sounder Module The compact SonarHub™ sounder module provides an all-in-one solution for adding best-in-class StructureScan HD and CHIRP sonar capabilities to compatible Lowrance HDS and Simrad NS series multifunction displays. An easy-to-install, plug-and-play, all-in-one network solution – the SonarHub™ Sounder Module makes it easier than ever to identify productive fishing areas with connectivity [...]
Marine Navigation & Instruments > Network Cables & Modules
SeaTalkhs Crossover Coupler For networking only two devices, choose the SeaTalkhs crossover coupler. The Raymarine SeaTalkhs Crossover coupler provides a secure, waterproof means to join together SeaTalkhs Ethernet cables with RJ45 male connections. The Crossover Coupler is also handy when adapting SeaTalkhs devices like radar scanners for direct-connection to new generation multifunction displays. Use it [...]
Marine Navigation & Instruments > Network Cables & Modules
NavNet Ethernet Cable, 6P(F) – 6P(F) Cross Over Cable, 30 Meters WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Marine Navigation & Instruments > Network Cables & Modules
ETHEXT-25YL 25 ft. Ethernet Cable Works with: Broadband Sounder-1, GlobalMap 5200C, GlobalMap 5300C iGPS, GlobalMap 7200C, GlobalMap 7300C HD, GlobalMap 8200C, GlobalMap 8300C HD, GlobalMap 9200C, GlobalMap 9300C HD, GlobalMap Baja 540C, GlobalMap Baja 840C, LCX-112C, LCX-113C HD, LCX-27C, LCX-28C HD, LCX-37C, LCX-38C HD, LMS-520C, LMS-522C iGPS, LMS-525C DF, LMS-527C DF iGPS, Navico Expansion Port-1