Blue Sea 4304 WeatherDeck Water Resistant Fuse Panel - 4 Position - Grey 
Water Booster System – 40 PSI – 4.5GPM – 12V
The Flojet 2840 Series Booster Systems are designed to provide constant water pressure of 0 to 40 psi (0.7 to 2.7 bar) and a maximum flow rate of 4.5 GPM at 10 psi (0.7 bar). The pump is fully automatic, with a built-in inlet strainer, pressure switch, and check valve, and supplies smooth flow from trickle to full flow. Typical uses include applications where available water pressure is very low and fluctuates widely. Easy installation requires only that the water lines be connected, and the power cord plugged in.
Features:
- Integrated pump and tank system
- It can be mounted vertically or horizontally
- Flow rates up to 4.5 US Gallons/min.
Kit Consists of:
12V Quad MPU, 4.5 GPM, SW 40, 0.77 gal capacity accumulator tank, plastic mounting board, and pump inlet strainer
WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
| Weight | 11.55 g |
|---|---|
| Dimensions | 17 × 14 × 9 cm |
Brand
Flojet
No accessories available for this product.
Literature
Owners Manual: Download PDF
No videos available for this product.
Related products
Marine Plumbing & Ventilation > Washdown / Pressure Pumps
Bronze AC Motor Pump Unit Flow rate: up to 9.6 USgpm, maximum head 40ft (17.3psi)Self-priming from dry up to 7.8ft Features: Easy to service and maintain. Will tolerate abrasive wear (this may affect performance – seek advice from your distributer). Handles hard and soft solids without clogging. Non pulsating flow. APPLICATIONS MARINE:Bait tank circulation, transfer [...]
Marine Plumbing & Ventilation > Washdown / Pressure Pumps
Johnson Pump Flow Master 5.0 GPH Variable Flow Demand Pump 12V
Aqua Jet Flow Master 5.0 WPSThe ideal choice for pressurizing water in a closed system. The digital controller adjusts water flow asthe demand is increased and decreased while maintaining a very smooth flow. The unique variable flowfeature of the Flow Master pump allows the pump to be mounted without an accumulator tank and still maintain [...]
Marine Plumbing & Ventilation > Washdown / Pressure Pumps
Johnson Pump 5.2 GPM Aqua Jet Washdown Pump Kit w/Hose – 24V
5.2GPM Aqua Jet Wash Down Kit 20 l/min (5.2 GPM) wash down kit conveniently includes a high capacity Aqua Jet WD 5.2, 5 bar (70 psi), PUMProtector inlet strainer, spray nozzle, bulk head fitting with valve, and 7.5 meters (25′) of coiled wash down hose all in one package. Aqua Jet wash down pump kit [...]
Marine Plumbing & Ventilation > Washdown / Pressure Pumps
Commercial Duty Water Puppy Flow rate: 34 litres/min (9 USgallons/min)Self-priming from dry up to 1.2m (4ft) Features: Small bilge debris present no problem to these bronze bodied, flexible impeller pumps. Simple design means fewer wearing parts. ISO 8846 MARINE (Ignition protection). ISO 8849 MARINE (Bilge pump standard). MotorPermanent magnet type, fully enclosed, stainless steel shaft, [...]
Marine Plumbing & Ventilation > Washdown / Pressure Pumps
Water Booster System – 40PSI – 4.5GPM – 115V The Flojet 2840 Series Booster Systems are designed to provide constant water pressure of 0 to 40 psi (0.7 to 2.7 bar) and a maximum flow rate of 4.5 GPM at 10 psi (0.7 bar). The pump is fully automatic, with a built-in inlet strainer, pressure [...]
Marine Plumbing & Ventilation > Washdown / Pressure Pumps
Shurflo by Pentair AQUA KING™ II Junior Fresh Water Pump – 12 VDC, 2.0 GPM
AQUA KING™ II Junior Fresh Water Pump – 12 VDC, 2.0 GPM SHURFLO’s 4128 fresh water pump design was created with a unique over-molded single-piece diaphragm, assuring long life and top performance in all plumbing systems. Designed as the next legendary pump, the 4128 pump is constructed for smooth flow. The 4128 fresh water automatic [...]
Marine Plumbing & Ventilation > Washdown / Pressure Pumps
Bronze AC Motor Pump Unit Flow rate: 3.4 USgpm, maximum head 40ft (17.3psi)Self-priming from dry up to 4.9ft Features: Easy to service and maintain. Will tolerate abrasive wear (this may affect performance – seek advice from your distributer). Handles hard and soft solids without clogging. Non pulsating flow WARNING: This product can expose you to [...]
Marine Plumbing & Ventilation > Washdown / Pressure Pumps
General Purpose Centrifugal PumpEnd Suction Centrifugal Pump The Rule General Purpose Pump is designed for use as a washdown pump and/or to circulate water to your livewell tank(s). Heavy duty construction for use on commercial or pleasure boats. 1-1/2″ (38mm) inlet and 1-1/2″ (38mm) discharge outlet. The Rule General Purpose Pump must be mounted below [...]