Ethernet Cable for M-Series – 50′
FLIR’s 50′ Ethernet Cable is for connecting the FLIR M-Series Cameras to
the Joystick Control Unit.
Features:
- Double Shielded
- RJ-45
- LSZH
- 50′ long
| Weight | 1.6 g |
|---|---|
| Dimensions | 9 × 8 × 2 cm |
Brand
FLIR Systems
No accessories available for this product.
No literature available for this product.
No videos available for this product.
Related products
Marine Navigation & Instruments > Network Cables & Modules
FA-30 VHF-AIS Splitter The VHF splitter enables the AIS receiver and VHF transceiver to share a single VHF antenna. Note: The FA-30 can not receive AIS signal when the VHF transceiver is transmitting. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or [...]
Marine Navigation & Instruments > Network Cables & Modules
Ethernet Cable for M-Series – 75′ FLIR’s 75′ Ethernet Cable is for connecting the FLIR M-Series Cameras tothe Joystick Control Unit. Features:Double ShieldedRJ-45LSZH75′ long
Marine Navigation & Instruments > Network Cables & Modules
Rugged, high-speed, moisture and solvent-resistant data cable withstand the toughest onboard marine environments. For Lowrance models with 5-pin yellow ethernet connector.
Marine Navigation & Instruments > Network Cables & Modules
MDA-3 Metadata AIS Zero Loss Antenna Splitter Utilizes a compact (5.5″X3.9″X1.9″) module that is IPx7 Waterproof rated, for flexible location and rugged performance in any marine environment. The Metadata AIS Zero Loss Antenna Splitter allows for the full use of VHF communications and AIS send/receive with a single antenna. This sophisticated antenna splitter was developed [...]
Marine Navigation & Instruments > Network Cables & Modules
NavNet Ethernet Cable, 6P(F) – 6P(F) Cross Over Cable, 30 Meters WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Marine Navigation & Instruments > Network Cables & Modules
GMS 10 Network Port Expander The GMS 10 network port expander allows you to connect multiple chartplotters and sensors over the Garmin Marine Network. With this robust 100 MB switch, you can connect multiple multi-functional displays (MFDs) and sensors to the marine network and gain the benefit of Ethernet-like data transfer speeds up to 10 [...]
Marine Navigation & Instruments > Network Cables & Modules
ETHEXT-25YL 25 ft. Ethernet Cable Works with: Broadband Sounder-1, GlobalMap 5200C, GlobalMap 5300C iGPS, GlobalMap 7200C, GlobalMap 7300C HD, GlobalMap 8200C, GlobalMap 8300C HD, GlobalMap 9200C, GlobalMap 9300C HD, GlobalMap Baja 540C, GlobalMap Baja 840C, LCX-112C, LCX-113C HD, LCX-27C, LCX-28C HD, LCX-37C, LCX-38C HD, LMS-520C, LMS-522C iGPS, LMS-525C DF, LMS-527C DF iGPS, Navico Expansion Port-1
Marine Navigation & Instruments > Network Cables & Modules
Termination Resistors are required on a NMEA 2000 network and are placed at each end of a network trunk cable. Like the double-ended cordsets, the termination resistors are waterproof and continue to function even while submerged in the bilge. Diagnostic versions indicate correct polarity at a glance to ensure power connections have been made properly [...]