SSH+4500 Solid Sheave Block
The SSH+ solid sheave is used to adjust the tack point. To sail closer to the wind even better, it is necessary to lower the sail tack. This will push forward the belly. Inversely, lift the tack, and the belly of the sail will go aft, and sailors will be able to sail further downwind.
Features:
- Quick and safe fitting for a FX+ 4500 furler
- Quick release pin
- Smooth and quickly installed
- Installation as 3-to-1 or 2-to-1
- Enables tightening from below the drum
- Possible fitting in the case of bowsprit
Specifications:
- Weight: 0.29 kg
Brand
Facnor Furling Systems
No accessories available for this product.
No literature available for this product.
No videos available for this product.
Related products
Sailing > Rigging
Channel Style Stay Adjuster – 6-7/8" (174mm) Long Applications:Typically used on dinghies, catamarans and small keelboats Materials:Grade 316 Stainless SteelSpecifications: Pin Ø: 1/4" Increment Length: 1/2" Qty. Adjustment Settings: 10mm Adjust. Length: 4-1/2" Length: 6-7/8" Weight: 3.2oz
Sailing > Rigging
Cable Cutter to 1/4″ – Felco C. Sherman Johnson Hand Crimp Fittings have proven themselves over the years, however the overall integrity of the system depends on the proper tools for the job. The tools are designed with special width and relief patterns which apply to Johnson hand crimp fittings and instructions only .The use [...]
Series 32 I-Beam Car – Saddle Top – Rubber Stand-Up Pad – 76mm(3″) Strong, stainless steel bodies with flared sides and angled ball bearing wheels provide high load capacity and smooth operation. Applications:Mainsheet and self-tacking jib travellers on boats to 9m (28ft) Materials:Black Chromed Grade 316 stainless steel car bodiesGrade 316 stainless steel wheels and [...]
Sailing > Rigging
C. Sherman Johnson Jaw/Jaw Tubular Turnbuckle T-Style 3/8-24 Thread
Jaw/Jaw Tubular Turnbuckle T-Style 3/8-24 Thread For those who prefer a traditional body turnbuckle. The forged silicon bronze body, coupled with our integral toggle jaw, provides positive locking and ease of adjustment. Forged silicon bronze bodies with 316 stainless ends offer a great non-galling combination. Integral toggle jaw eliminates the need for a separate rigging [...]
Sailing > Rigging
Series 25 T-Track – Composite Slide – 102mm(4″) For small keel boats and sportsboats T-track jib leads are a great blend of performance and functionality in a simple, efficient package. Composite slide bodies with plunger stops run on anodised aluminium track, and allow quick and easy manual adjustment. LightweightComposite jib lead cars continue the design [...]
Sailing > Rigging
Slab Reefing KitSupplied with sliding blocks which are held in place with spring-loaded plungers. Manufactured from stainless steel and ‘Spectro’ anodised aluminium.Complete with sufficient length of ‘T’ Track and end stops. Supplied with 60cm of 25mm anodised ‘T’ Track For Yachts up to 8.5M (28′)
Series 25 T-Track – Racing Track – Black – 25mm(63/64″) Stop Hole Centers Features:‘Racing’ track has 25mm(63/64″) stop hole spacing for even more precise control of the car position and sheeting angleLow ProfileLightweight Track Fastenings:5mm (3/16″) countersunk fasteners at 100mm (3-15/16″) centers Materials:Anodised aluminium alloy track DSpecifications:Length: 996mm(3.3″)Weight: 405g(14.2oz)
Sailing > Rigging
Ronstan Series 19 I-Beam Car – Adjustable Track Stop – Spring Loaded – 19mm (3/4″)
Series 19 I-Beam Car – Adjustable Track Stop – Spring Loaded – 25mm(1″) Track Fastenings: To suit 5mm(3/16″) countersunk fasteners at 100mm(3-15/16″) centres. Stop Holes: – 50mm (1-31/32″) centres.Track is supplied with RC7250-INS insulating inserts to eliminate corrosion between track and fasteners Minimum Curve RadiusFor 51mm(2″) car Min horizontal ‘A’ curve radius = 400mm (15-3/4″). [...]