NMEA 2000 Transducer Smart Sensor DTS810
This combination transducer gives you accurate information about depth, speed and water temperature. The transducer is supplied with a thru-hull / ground sleeve for installation in the bottom of the vessel. The transducer can be easily pulled out for cleaning and maintenance. The data from the Triducer can be displayed on any radar, chart plotter, or device that accepts NMEA 0183 or NMEA 2000® data. The Airmar type DST810 breakthrough sensor fits into the Airmar type P617V breakthrough sleeve (included with the DST810). Because the widely used airmar thru-hull transducer type DST800 is also supplied with the thru-hull type P617V, an exchange / upgrade of existing transducers of the type DST800 with the type DST810 is possible without much effort. Popular depth sensor for shallow water performance.
Related products
Marine Navigation & Instruments > Transducers
P79 Plastic In-Hull Transducer, 600w (10-Pin) 600 Watts 50/200 kHz 45/15 degree Beam Angles Plastic In-Hull Mount for Shoot-Through Applications 30 Foot Cable with 10-Pin Connector WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go [...]
Marine Navigation & Instruments > Transducers
Rubber Coated Transducer, 1kW (No Plug) 1 kW 50 kHz 12×28 degree Beam Angle 11 lbs. Rubber Coated – Chest, Housing or Tank Mounted 15-Meter Cable, no connector providedr May be used for 75 kHz frequency setting feature, available only in FCV1100/1200 and FCV1200BB WARNING: This product can expose you to chemicals which are known [...]
Marine Navigation & Instruments > Transducers
Plastic Transom Mount Multisensor, 600w (8-Pin) 600 Watts 50/200 kHz 45/11 degree Beam Angles Plastic Transom Mount with Temperature and Removable Speed Assembly 30 Foot Cable with 8-Pin Connector WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For [...]
Marine Navigation & Instruments > Transducers
Furuno 520-PLD Plastic Thru-Hull, Low Profile, Transducer, 600w (10-Pin)
Plastic Thru-Hull, Low Profile, Transducer, 600w (10-Pin) 600 Watts 50/200 kHz 45/15 degree Beam Angles Low Profile Plastic Thru-hull 30 Foot Cable with 10-Pin Connector WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to [...]
Marine Navigation & Instruments > Transducers
Furuno 526ST-MSC7 Bronze Thru-Hull Multisensor w/ 7 inch Stem, 600w (8-Pin)
Bronze Thru-Hull Multisensor with 7 Inch Stem, 600w (8-Pin) 600 Watts 50/200 kHz 40/10 degree Beam Angles Bronze Thru-Hull with 7" Stem, Speed and Temperature 30 Foot Cable with 8-Pin Connector High Speed Fairing Block Included WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, [...]
Marine Navigation & Instruments > Transducers
Transom Mount Transducer w/ Temp, 1kW (10-Pin) M258 Transducer with Transom Mount Bracket 1 kW 50/200 kHz 14×23 degree/3×5 degree Beam Angles Transom Mount with Temperature 10 Meter Cable with 10-Pin Connector WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other [...]
Marine Navigation & Instruments > Transducers
Lexan Depth Transducer f/ST60 & ST290 P19 Plastic Low Profile Through Hull Transducer Key FeaturesIncludes 45′ cableFrequency: 200 kHzCompatible hull material: metal & fiberglassHole diameter for installation: 2″ Compatible modelsST60+i50ST70 / i70 (requires ST70 depth pod or ITC5 – sold separately)
Marine Navigation & Instruments > Transducers
Compatible with the following instruments: ST70* ST60+ ST290 Compatible hull material: wood and fiberglass Cable: 45 ft. cable Hole diamater for installation: 7/8″ Includes fairing block. *Using with ST70 requires purchase of ST70 Depth Pod, sold seperately.