Temperature/Humidity Sensor w/Radiation Shield
Features both temperature and humidity sensors inside the radiation shield, which protects the sensors from solar radiation and other sources of
radiated and reflected heat. Includes hardware for mounting on a fence post or pole and 25′ (7,6M) cable.
| Weight | 3.3 g |
|---|---|
| Dimensions | 10 × 8 × 6 cm |
Brand
Davis Instruments
No accessories available for this product.
No videos available for this product.
Related products
Outdoor > Weather Instruments
Rain Collector Heater This product will work with our Vantage Pro and Vantage Pro2 wireless weather stations, however, the heater must be plugged into an electrical outlet. This product cannot be used with our any of our Solar Power Kits or the Vantage Vue station.Use in cold climates to measure freezing rain or the moisture [...]
Outdoor > Weather Instruments
Solar Radiation Sensor For use with Vantage Pro and Vantage Pro2. (Already included with Vantage Pro Plus and Vantage Pro2 Plus.)Measures solar radiation and is required (along with an anemometer and a temperature/humidity sensor) if you wish to monitor evapotranspiration.Diffuser element and housing are carefully designed for accurate cosine response. Silicon photo diode provides good [...]
Outdoor > Weather Instruments
Anemometer for Vantage Pro2™ & Vantage Pro® Replacement anemometer with mounting base for wireless and cabled Vantage Pro2 and Vantage Pro weather stations.Rugged components stand up to hurricane-force winds, yet are sensitive to the lightest breeze. Includes both wind speed and wind direction sensors, mounting hardware, and 40′ (12M) cable. SpecificationsWind-tunnel tested to speeds in [...]
Outdoor > Weather Instruments
Wireless Repeater with Solar Power For longer distances or to improve reception in troublesome areas, add one or more Wireless Repeaters. Transmitting and receiving range for each repeater is up to 1000′ (300M) outdoors, line of sight; typical range through walls under most conditions is 200′ to 400′ (60 to 120M). Includes solar panel, regulator [...]
Outdoor > Weather Instruments
Davis 6322C Wired Integrated Sensor Suite w/Standard Radiation Shield
Cabled Vantage Pro2™ ISS For use with Vantage Connect for Cabled Systems, Vantage Pro2 cabled consoles, cabled Weather Envoy and WeatherLink.Our innovative integrated sensor suite combines our rain collector, temperature and humidity sensors, and anemometer into one package – making setup easier than ever and improving performance and reliability. For improved accuracy, temperature and humidity [...]
Outdoor > Weather Instruments
Anemometer Transmitter Kit Product DescriptionWith Vantage Pro2, this solar-powered kit allows you to mount the anemometer in a different location than the integrated sensor suite (up to 1,000′ (300M) from your wireless console/receiver).With Envoy8X, you can use this kit with any of our sensors including solar radiation, UV, temperature, anemometer, rain and third-party sensors that [...]
Outdoor > Weather Instruments
Sensor Mounting Shelf For mounting solar radiation sensor and/or UV sensor on Vantage Pro and Vantage Pro2 integrated sensor suite. Rigid shelf with anodized aluminum posts and stainless steel hardware attaches easily next to the rain collector on the outside of the integrated sensor suite.Compatible with both original Vantage Pro and Vantage Pro2.
Outdoor > Weather Instruments
Daytime Fan Aspirated Radiation Shield Kit Product DescriptionAdd the benefits of fan aspiration to your wireless or cabled Vantage Pro2 or Pro2 Plus. Half the cost of our 24-hour fan aspirated radiation shield, but nearly 75% as effective in reducing the effects of daytime radiation. Solar-powered fan runs during the day. Since there is no [...]